Interests with NO competition!.
- Low monthly isntallment
- No pointless overpaying
- Available for purchases from 3.000 Kč till 250.000 Kč
- Get the product of your dreams today, without further delay
Body Repair Tools instalment Purchases with interest rates from 4,9 % p.a.
Úrok
4,9 %
p. a.
Was this information useful?
This form is used only for evaluating the information in the description above.
If you have any question about our products, services, transport or any other request, please contact our customer support.
If you have any question about our products, services, transport or any other request, please contact our customer support.
What should be improved? Is anything missing here? Is anything wrong? Share it with us.
36
Results
Car Mechanic Tools - set of fixtures for repairing dents in car bodies using the PDR method, 21 parts in plastic case, set contains 9x suction cups of different shapes and sizes, 8x hot melt glue sticks, length 30 cm, 1x reverse slide hammer, weight 1 kg, 1x dent remover, 1x plastic scraper (so called. scraper) for removing adhesive residues, width 22 mm, 1x hot melt gun
Car Mechanic Tools - Induction heating device for loosening sealed joints without using direct fire
Free deliveryAlzaboxes and stores
Car Mechanic Tools - 6-point handle 14,7 mm, speed 2400 bpm, Piston stroke 2" (51 mm), piston diameter 1-1/8" (28.6 mm), impact energy 27.30 J, working pressure 6.2 bar, air connection 3/8" GW, 13 mm power cable, average air consumption 594 l/min, length 327 mm, weight 5,9 kg
Glass Suction Cups - single point, load capacity 120 kg, diameter 213 mm, weight 1,4 kg
Free deliveryAlzaboxes and stores
Car Mechanic Tools - professional, rivet nut size: M4-M10, strength: 1650 kgf (kG), stroke: 8 mm, working pressure: 6,2 bar, air connection: 1/4" GW, supply hose: 10 mm, average air consumption: 1,5 l/cycle, weight: 1,55 kg
Free deliveryAlzaboxes and stores
Car Mechanic Tools - Induction heating device for loosening sealed joints without using direct fire
Car Mechanic Tools - The soldering iron has an innovative design with built-in lithium-ion battery, set contains 12 pcs of plastic welding wires 150 mm long, including ABS/PP/PE/PS material, 3 pcs stainless steel reinforced wire mesh 5 × 100 mm, 50 pcs of staples with a diameter of 0.8 mm, 50 pcs of staples with a diameter of 0.6 mm, USB cable
LED Flashlight for small and medium curing areas, irradiation, center:10 mW/CM2, irradiation, minimum:6 mW/CM2, Wavelength:390-400 nm, the time of dawn: 1.5 hours, battery: Li-ion, battery capacity:2600 mAh, IP30, 270 g, 190 x 60 x 32 mm, Package contains: 1x SCANGRIP UV-LIGHT, 1x charging cable, 1x charger
Extractor Tool - Pneumatic vibrating puller for removing stuck, baked-on injectors
Car Mechanic Tools - powered by a stream of compressed air, removes the flux, I'm sorry, Res, painting of steel elements in body and paint shops, car workshops, manufacturing plants and DIY activities, use in concrete texturing in the construction industry, adapted to any surface, the design of the equipment ensures a reduction of vibrations on the operator's hands, needle size: O 1.4 × 80 mm, 13 needles, total length approx. 240 mm
Protective Cover - 175 × 150 cm, (1200 g/m2), resistance to 1200°C
Tool Set - set contains 10 diameters 17 - 18 - 18,2 - 19 - 20 - 22,5 - 24 - 26 - 26,7 - 32 mm
Spray Gun - professional paint gun, container volume: 0.6 liters, connection: M16 × 1.5, working pressure: 3.5 - 5.0 bar, air connection: 1/4" GZ, dia. consume. air: 396 l/min, weight: 0.7kg
Spray Gun - professional paint gun, container volume: 0.6 liters, connection: M16 × 1.5, working pressure: 3.5 - 5.0 bar, air connection: 1/4" GZ, dia. consume. air: 396 l/min, weight: 0.7kg
Car Mechanic Tools - Extremely high power of the pneumatic chisel for unscrewing corroded or seized joints, the impact required to loosen wheel bearings, bushings, tapered joints (e.g. pins), corroded and seized bolts, good for lubricant distribution and tensioner bearing removal, rust and paint removal, fastening of the chisels by means of a quick coupling, 1/4" connection, 19 needles, 4500 beats/min, 350 mm, stroke length 43 mm, 1.97 kg, working pressure 6,3 bar
Spray Gun - professional paint gun, container volume: 0.6 liters, connection: M16 × 1.5, working pressure: 3.5 - 5.0 bar, air connection: 1/4" GZ, dia. consume. air: 396 l/min, weight: 0.7kg
Extractor Tool - Pneumatic vibrating puller designed for disassembly of stuck - baked injectors Bosch, Delphi, Denso, Siemens
Tool Set - suitable for both aluminium and steel
Free deliveryAlzaboxes and stores
Car Mechanic Tools - Induction heating device for loosening sealed joints without using direct fire
Car Mechanic Tools - tools for removing dents on car bodies, ensures fast and precise repair of minor dents on the car body, in the package you will find three suction cups, suction force up to 100 kg, hammer weight 1,14 kg, working pressure 6.2 bar, 1/4″ connection, length 590 mm, Suction cups with a diameter of 75 mm / 100 mm / 125 mm, hook 90 mm
Free deliveryAlzaboxes and stores
Car Mechanic Tools - Induction heating device for loosening sealed joints without using direct fire
Car Mechanic Tools - set of tools for cutting sheet metal, bodywork etc., 3 pcs flat - straight, curved 15°, bent 90°, length 300 mm, hardened special steel, for cutting spot welds, body panels etc., two cutting edges (front and side), Grindable, 2-component, non-slip handle