Tools for Vehicle Technicians ASTA – same-day delivery available. Just make sure the product you want is in stock. Choose products to buy from the comfort of your home and have them delivered to your address, to an AlzaBox, or to one of our stores. Learn more about why shop on Alza.cz.
Continue
26
Results
Oil Extractor Pump - pneumatic suction and ATF oil filler in automatic transmissions, volume 10l, working pressure 0-2.07 bar (0-30 psi), ¼" quick coupling, adapters in the set 140 x 45 mm BMW, 150 x 30 mm VAG, 120 direct, Screwed Ford, 100 straight, screwed VAG - 5/16 x 24 screwed Volvo, M8 x 1.0 bolt-on Infiniti with 7-speed automatic transmission, M10 x 1.0 bolted VW / Audi, Mini Cooper, M10/M15 X 1.0 VW/Passat and Tiguan after 2007, M12 x 1,5 bolted Mercedes-Benz with 7-speed automatic transmission, M18 x 1.5 Toyota, Lexus, M24 x 1.5 bolted VAG with DSG automatic transmission, M22 x 1.5 bolted VAG with CVT automatic transmission, M30 x 1.5 Skoda
LED Flashlight - portable LED flashlight for workshops and garages with 3 W COB 12 V power ASTA, 3W LED flashlight, 3W "COB" light source, Highly polished light reflection for a wider range of illumination, on and off in milliseconds, working hours up to 3 hours, charging time: 4-5 hours, luminous flux 160 lumin, battery: Lithium Ion, 3.7 V DC, 1900 mAh Li, plug for cigarette lighter socket 12V, 12V charger
Puller - ball stud puller, 30-56 mm diameter 20 mm, with two-stage regulation and mechanical drive by means of screw spindle, designed for disassembly of so called ball studs. "rounds" from the steering rods, the movable arm can be adjusted as required and thus changes the maximum puller opening in the range of 30 - 56 mm
Puller - set of three universal ball stud puller suitable especially for working in tight spaces, the ends of the screws are equipped with a ball, which reduces friction between them and the joint - the pin, puller size 23 × 55 mm, 6 edges for 17 mm wrench, 28 × 55 mm, 34 × 63 mm, 6 edges for 19 mm wrench, made of chromium-molybdenum (Cr-Mo) steel, packing: plastic case
Puller for ball joints - manual, two-armed, length 400 mm, span 24 - 24 mm, weight 0,5 kg
Puller for wiper arms - manual, two-armed,, screw length 105 mm, weight 0,5 kg
Puller - two-arm puller, with a lock, reinforced, made of high quality hardened steel with lock, which prevents shoulder extension, designed for disassembly of small bearings e.g. in alternators or dismantling car wiper arms, working range 24-55 mm, width of the crossbar 85 mm, total length of the arms 130 mm, shoulder width 20 mm, centre spindle diameter 7 mm
Puller - enables quick and easy removal or installation of the bearing in the rear axle of the BMW, App: BMW 5 Series E39 engine, BMW 7 Series E38 engine
Magnetic Bowl - made of double stainless steel, for safe storage of screws, Matrix, screws, pads, sockets and small tools, strong magnet with silicone anti-scratch cover, suitable for all iron surfaces, the possibility of attaching it bottom up, thickness 0.4 mm, polished mirror finish, bowl diameter 150 mm, magnet diameter 80 mm
Puller - puller for Mercedes-Benz and Citroen suspension springs, made of chrome-vanadium steel, surface is black and polished, supplied in plastic case
Puller - puller for mounting and dismounting wheel bearing and hub for VW ŠKODA AUDI, for diameter 72 mm, Designed for easy removal and precise mounting of the bearing in the hub, mounting plate has 8 holes, for vehicles: Audi A2, Skoda Fabia (2000), Volkswagen Polo and Fox (2005-), Seat Ibiza (2002-)
Applicator - Adapters for filling oil into automatic transmission, for use in conjunction with ASTA A-TRA75 hand pump or ASTA A-13ED10L pneumatic pump, plastic case
Tyre mounting lever - for mounting and dismounting tyres from motorcycle rims, for aluminium and steel rims (painted or polished), material steel with plastic knurled protective strip, double T-profile, length 30,5 cm, width 2,7 cm
Puller - universal, manual, two-arm
Puller - two-arm puller for removing Opel steering wheel from 2007, made of chrome-vanadium steel (CR-V), thickness of the hook base at the top approx. 5.5 mm, hook base depth approx. 3.5 mm, hook length approx. 12 mm, hexagon wrench 17 mm, range of margins: 35/80 mm, screw length 95 mm
Puller - puller for mounting and removing wheel bearing and hub, for 90 mm diameter ASTA A-H190, for easy and quick removal and precise mounting of the bearing to the axle hub, for Audi vehicles: A4/S4 Quattro Avant (2001-2008), A6/S6 Quattro Avant (2002-2005), A8/S8 Quattro Avant (2004-2007), R8 from 2007 onwards, quality design: made of chrome-vanadium (Cr-Mo) steel + S45C steel
Puller - Hub puller FORD FOCUS II, VOLVO V50, set for mounting and dismounting bearings - wheel hubs with diameter 78 mm
Puller - clamp puller for removing hose clamps 8-60 mm, used for steel self-tensioning straps and hose clamps with a diameter of 8-60 mm, particularly useful in small, tight and hard-to-reach places
Car Mechanic Tools - balancing suspension device for hanging tools and instruments, useful tool for workshop, factory and other operations, allows hanging tools and instruments and their subsequent easy pulling or reeling
Puller for pulleys - manual, double-arm, length 230 mm, span 30 - 150 mm
Tools for Vehicle Technicians ASTA
Chcete doručiť tovar na Slovensko? Prezrite si
Náradie pre automechanikov