Interests with NO competition!.
- Low monthly isntallment
- No pointless overpaying
- Available for purchases with all products marked as *In stock on Alza
- Get the product of your dreams today, without further delay
Corded Drills instalment Purchases with interest rates from 4,9 % p.a.
Úrok
4,9 %
p. a.
Was this information useful?
This form is used only for evaluating the information in the description above.
If you have any question about our products, services, transport or any other request, please contact our customer support.
If you have any question about our products, services, transport or any other request, please contact our customer support.
What should be improved? Is anything missing here? Is anything wrong? Share it with us.
24
Results
Pillar Drill 710W, speed 200-850/600-2500/min, laser, quick-release chuck 13 mm, maximum stroke 90 mm, 11,2 kg
In instalments
from
157,-
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
BOC032a
Drill - 750 W, with hammer, speed up to 2800 rev/min, maximum torque: 2,3 Nm, motor type: carbon, quick release, maximum chuck size: 13mm, weight: 2,2kg
In instalments
from
173,-
In stock 2 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
BOFAC9g1
Drill - 800 W, with hammer, speed up to 3000 rev/min, maximum torque: 1,8 Nm, maximum chuck size: 13mm, weight: 2,6kg
In instalments
from
140,-
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
BOC030k
Pillar Drill - Bench-top column drill for drilling and countersinking, power 600 W, weight 30 kg
In instalments
from
99,-
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
HEChob150
Drill Driver Electronic, power input 570W, idle speed 0-4000/min., tightening torque 16/10Nm, rubberized non-slip handle, cable length 4m, weight 1.3kg
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CIB101g
Drill - 720 W, without hammer, speed up to 2900 rev/min, maximum chuck size: 13mm, weight: 2,3kg
In instalments
from
145,-
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CIB108f
Pillar Drill - connection 400 V~50 Hz, motor power 800 W/P1, spindle with conical handle, spindle feed 80 mm, lining 169 mm, spindle speed 210 - 2500 rpm /min, MK2 spindle cone, number of speeds 12, chuck 3 - 16 mm, solid drilling table 260 × 260 mm, cast iron standing plate 240 × 410 mm, overall dimensions 650 × 340 × 1010 mm
Drill - 550 W, without hammer, speed up to 2430 rev/min, motor type: carbon, maximum chuck size: 13mm, weight: 22kg
Pillar Drill - 230 V~50 Hz connection, motor power 500 W/P1, chuck 3 - 16 mm, pinola stroke 90 mm, spindle cone MK2/B16, speed range 290 - 2,500 rpm /min.
Pillar Drill - connection 400 V~50 Hz, motor power 600 W, pinola stroke 60 mm, offset 125 mm, spindle speed 630 - 2700 rpm. /min., speed 5, chuck 3 - 16 mm
Drill Driver Electronic, power input 570W, idle speed 0-2500/min., tightening torque 32/18Nm, Tightening torque adjustment in six stages, L/P course, with LED lighting, cable length 4m, weight 1.8kg
In instalments
from
179,-
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CIB101e
Pillar Drill - connection 400 V~50 Hz, engine power 1,5 kW/P1, chuck 5 - 20 mm, spindle feed 120 mm, spindle cone MK3/B22, speed range 110 - 2,880 rpm /min.
Drill Driver Electronic, power input 570W, idle speed 0-2500/min., tightening torque 25/15Nm, rubberized non-slip handle, L/P course, with lighting, weight 1.7kg
In instalments
from
179,-
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CIB101d
Pillar Drill - connection 230 V~50 Hz, motor power 600 W/P1, pinhole stroke 60 mm, offset 125 mm, spindle speed 630 - 2700 rpm. /min., spindle taper MK2/B16, speed 5, chuck 3 - 16 mm
Pillar Drill - V-belt drive, speed adjustment via stepped pulley, V-belt tensioning system, drill spindle with ball bearings, positioning laser
Pillar Drill HECHT 1057 bench drill with 720 W and adjustable speed (500-2600 rpm).
Drill - 710 W, with hammer, speed up to 3200 rev/min, maximum chuck size: 13mm, weight: 2,1kg
Pillar Drill - connection 230 Volt~50 Hz, motor power 350 W, spindle travel 50 mm, spindle speed 580 - 2650 rpm, spindle speed 580 - 2650 rpm, spindle speed 580 - 2650 rpm, spindle speed 580 - 2650 rpm, spindle speed 580 - 2650 rpm /min., speed 5, chuck 1 - 13 mm
Drill - 1010 W, with hammer, speed up to 2900 rev/min, quick release, maximum chuck size: 13mm, weight: 2,5kg
Drill - 680 W, with hammer, speed up to 2800 rev/min, maximum torque: 22 Nm, motor type: carbon, quick release, maximum chuck size: 13mm, weight: 2kg
Drill - 710 W, with hammer, speed up to 3200 rev/min, maximum torque: 24 Nm, quick release, maximum chuck size: 13mm, weight: 2kg
Drill - 720 W, with hammer, speed up to 2900 rev/min, quick release, maximum chuck size: 13mm, weight: 2,5kg
Drill - 720 W, without hammer, speed up to 2900 rev/min, quick release, maximum chuck size: 13mm, weight: 2,3kg
Drill Driver Electronic, power input 570W, idle speed 0-4000/min., tightening torque 16/10Nm, depth stop adjustment, rubberized non-slip handle, L/P course, cable length 4m, weight 1.4kg