Non-Hammer Drills instalment Purchases
Don't wait for your payday and start shopping now. It only takes a few minutes to fill out the application and it will be approved within 30 minutes.
Benefits:
- First payment due on the 17th of next month.
- Choose your repayment schedule ranging from 11 to 48 months.
- Instalment purchase can be arranged from the comfort of your home or you can stop by the nearest Alza store and let our consultants help you out.
- We offer repayment insurance to protect you in case you become unable to repay the loan, for example if you lose your job.
Was this information useful?
This form is used only for evaluating the information in the description above.
If you have any question about our products, services, transport or any other request, please contact our customer support.
If you have any question about our products, services, transport or any other request, please contact our customer support.
What should be improved? Is anything missing here? Is anything wrong? Share it with us.
14
Results
Sponsored
Pillar Drill 710W, speed 200-850/600-2500/min, laser, quick-release chuck 13 mm, maximum stroke 90 mm, 11,2 kg
Drill - 710 W, without hammer, speed up to 2600 rev/min, motor type: carbon, maximum chuck size: 13mm, weight: 8,3kg
In instalments
from
150,-
In stock 2 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
SCHEvrt02
Drill - 720 W, without hammer, speed up to 2900 rev/min, maximum chuck size: 13mm, weight: 2,3kg
In instalments
from
142,-
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CIB108f
Drill - 550 W, without hammer, speed up to 2430 rev/min, motor type: carbon, maximum chuck size: 13mm, weight: 22kg
Pillar Drill - connection 400 V~50 Hz, motor power 600 W, pinola stroke 60 mm, offset 125 mm, spindle speed 630 - 2700 rpm. /min., speed 5, chuck 3 - 16 mm
Pillar Drill - 230 V~50 Hz connection, motor power 500 W/P1, chuck 3 - 16 mm, pinola stroke 90 mm, spindle cone MK2/B16, speed range 290 - 2,500 rpm /min.
Drill Driver Electronic, power input 570W, idle speed 0-4000/min., tightening torque 16/10Nm, depth stop adjustment, rubberized non-slip handle, L/P course, cable length 4m, weight 1.4kg
In instalments
from
146,-
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CIB101h
Pillar Drill - connection 230 V~50 Hz, motor power 600 W/P1, pinhole stroke 60 mm, offset 125 mm, spindle speed 630 - 2700 rpm. /min., spindle taper MK2/B16, speed 5, chuck 3 - 16 mm
Pillar Drill - connection 400 V~50 Hz, motor power 800 W/P1, spindle with conical handle, spindle feed 80 mm, lining 169 mm, spindle speed 210 - 2500 rpm /min, MK2 spindle cone, number of speeds 12, chuck 3 - 16 mm, solid drilling table 260 × 260 mm, cast iron standing plate 240 × 410 mm, overall dimensions 650 × 340 × 1010 mm
Drill Driver Electronic, power input 570W, idle speed 0-4000/min., tightening torque 16/10Nm, rubberized non-slip handle, cable length 4m, weight 1.3kg
Pillar Drill - connection 230 Volt~50 Hz, motor power 350 W, spindle travel 50 mm, spindle speed 580 - 2650 rpm, spindle speed 580 - 2650 rpm, spindle speed 580 - 2650 rpm, spindle speed 580 - 2650 rpm, spindle speed 580 - 2650 rpm /min., speed 5, chuck 1 - 13 mm
Drill - 720 W, without hammer, speed up to 2900 rev/min, quick release, maximum chuck size: 13mm, weight: 2,3kg
Drill Driver Electronic, power input 570W, idle speed 0-2500/min., tightening torque 32/18Nm, Tightening torque adjustment in six stages, L/P course, with LED lighting, cable length 4m, weight 1.8kg
Drill Driver Electronic, power input 570W, idle speed 0-2500/min., tightening torque 25/15Nm, rubberized non-slip handle, L/P course, with lighting, weight 1.7kg