Reviews Creality ENDER 3 V2
Interested in reviews of Creality ENDER 3 V2? It got 4.4 out of 5 stars from our customers. Find specific customer reviews of Creality ENDER 3 V2 below. We will appreciate if you also share your experiences with Creality ENDER 3 V2 after purchasing.
User Reviews
Tomáš, Litoměřice
Rated 13/11/2022, variant Creality ENDER 3 V2
Verified purchase
I have this printer and anyone who buys from this brand should realize that it is a basic to learn. so you take a coal and you build from it. If the printer replaces the plate springs with hard ones. They don't need to be shielded. It takes a little bit of work. For the price I am satisfied and I like it better than any more expensive one. You can fix anything on a Trabant. nothing on the car. And that's why I like her
silence
nice print
cheap to build.
0 ×Report
Automatic translation
Vladimír, Turnov
Rated 01/11/2022, variant Creality ENDER 3 V2
Verified purchase
It's working.
As a machinist, I cried during the assembly. There was nothing to the angle. I had to assemble it on the drawing board and put the pads underneath. I replaced the mud bolts with iron ones. a total of about 4 hours of work.
Another nonsense are the holes for air intake from the bottom. The sheets do not touch each other and cover the air access to the fan.
The Y-axis was tightened so tightly that the guide rollers formed flats.
0 ×Report
Automatic translation
Petr, Tábor 3
Rated 22/10/2022, variant Creality ENDER 3 V2
Verified purchase
For this money, great satisfaction, although it would require a "Z" attachment on both sides, but nothing that could not be done.
I am overall happy and with the filament feeder, I have not found any problem on it.
I've seen somewhere that it takes 10 minutes to assemble. Well it's not the first thing I've assembled and it certainly wasn't 10 minutes. Maybe if I were building a 3rd I'd still doubt this time.
Package contents
Double-sided pad
Price
Expansion options
The fan on the main board sometimes hums.
Just turn it off turn it on and it's good (I'm going to change the fan)
Aligning the bed - Bad springs
Instructions
0 ×Report
Automatic translation
Anonymous customer
Rated 28/04/2022, variant Creality ENDER 3 V2
Verified purchase
I would say the ideal price-performance ratio. I would recommend purchasing a CR Touch automatic level sensor, so you don' t have to deal with board leveling before reprinting (unless you press for a while). If the product peels off during printing, you just need to lightly coat the glass surface with a water-soluble glue (I use a solid Hercules in a tube), after printing everything can be easily cleaned with water.
After half a year, everything still works
Possibility of gradual purchase of updates in CZ stores
large tickable area
noisier fans
0 ×Report
Automatic translation
Lukáš, Český Brod
Rated 26/03/2022, variant Creality ENDER 3 V2
Verified purchase
the biggest disappointment for me is that after a week my potentiometer got stuck and broke. disassemble the printer and take it to Alza so that the technician will write to me in 2 days if he doesn' t want to complain to me. that' s why I ordered the touch kit
beautiful prints
the filament holder is not as shocking as others describe
The leveling springs aren' t so appalling either.
SD card, card reader and accessories for it
has a smaller drawer for things
cleaning needle in a set
the board is quickly scratched
I missed the potentiometer under the display all week, so handling the printer is okay. I ordered a touch screen upgrade kit
The fan at the bottom of the printer is not well resolved and the cables are clogged with glue from the melt gun
sometimes they switch cables during production
0 ×Report
Automatic translation
Anonymous customer
Rated 16/03/2022, variant Creality ENDER 3 V2
Verified purchase
I bought the printer with mixed feelings, I was afraid that for a price of around 6 thousand crowns it would not be a miracle, although these printers are praised, but I was pleasantly surprised if I miss the last 2 cons, then the price tag is a great printer, but it spoils the weak springs, so I recommend buying them straight away with the printer, so that you don' t lose too much nerve when calibrating the pad.
A lot of music for little money
Pleasant display
Really weak springs on the plate, calibration is needed every third print
Complicated and confusing instructions, especially when setting up the extruder
It' s more of a design, but here and there in the profiles there are holes just like that, just useless
0 ×Report
Automatic translation
Petr, Praha 4 - Kunratice
Rated 12/03/2022, variant Creality ENDER 3 V2
Verified purchase
Meets everything I expected
Nice print
Seamless assembly
Noisier
0 ×Report
Automatic translation
Company
Rated 16/02/2022, variant Creality ENDER 3 V2
Verified purchase
Enormously inaccurate printing, recalibration necessary after each print. Apparently suitable for accuracy + - 3 mm, not applicable for technical models.
Flying axis Z + _ 3 cm, rubber wheels on the right side that hold the right side of the axis are extremely inaccurate and unstable every time you print. The printer needs to be recalibrated with a single manual feed.
0 ×Report
Automatic translation
Radek, Mělník
Rated 20/12/2021, variant Creality ENDER 3 V2
Verified purchase
cheap, nice print.
noisy,
after three days, the card reader's malfunctioning. I always have to turn the printer off and on again to prevent the card from being read.
I suspect it's about to stop working altogether.
0 ×Report
Automatic translation
Robert, Praha 10 - Vršovice
Rated 11/12/2021, variant Creality ENDER 3 V2
Verified purchase
I am very satisfied with the printer, I expected that for a price of around 5k I will get a product that will print, but poor quality and high failure rate. These fears did not come true. The printer is very reliable and produces high quality prints. I would criticise that the assembly manual is extremely complicated to understand and the English translation is very unhelpful. I composed according to YouTube video. Some of the supplied parts had insufficiently tightened bolts or were crooked, fortunately it was enough to tighten or loosen them. The springs are not really of good quality, which is exacerbated by the fact that the supplied firmware does not support moving the print head to the calibration points. However, it was enough to upload an unofficial version, which simplified the process considerably.
Very high quality prints for a relatively low price
Easily editable firmware
Useful display
Weak springs - Endless recalibration of the bed
Bad manual on folding
Poor quality assembly of supplied parts
0 ×Report
Automatic translation
