Alza Benefit slevy - 3D Printers
Program pro zaměstnance a VIP klienty zapojených firem a organizací
83
Results
Creality ABS 1kg Red
Filament - made from ABS soluble, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 260°C, print mat temperature: 110°C
499,-
In stock 3 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CRP0624_05
Creality ABS 1kg Yellow
Filament - made from ABS soluble, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 260°C, print mat temperature: 110°C
399,-
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CRP0624_07
Creality Soleyin Ultra PLA 1kg Gray
Filament - made from PLA, filament diameter: 1.75mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C, recommended print speed: from 30mm/s to 300mm/s
399,-
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CREAU250606
Creality Soleyin Ultra PLA 1kg Pineapple Yellow
Filament - made from PLA, filament diameter: 1.75mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C, recommended print speed: from 30mm/s to 300mm/s
329,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CREAU250607
Creality CFS-C
3D Printer Accessory - multicolour module, automatic switching of up to 4 filaments, RFID filament management, detection of running and tangled filament, moisture protection with desiccants, for filaments 1,75mm
7,489,-
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CREAU251105
Creality CR-TPU Black 1kg
Filament - made from TPU eTPU, flexible and glossy, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 240°C, print mat temperature: 60°C, recommended print speed: from 20mm/s to 120mm/s
New arrival
539,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CREAU260725
649,-
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CRP22_16
Anycubic ACE 2 Pro for the S1, S1 Max and Kobra X
3D Printer Accessory - for Anycubic Kobra S1/Kobra S1 Max/Kobra X, 4 filaments, filament diameter 1.75 mm, active drying up to 65 °C, drying during printing, active humidity control, 4× brushless motors, filament detection, dimensions 368 × 291.5 × 236.5 mm
New arrival
6,099,-
In stock 2 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
ANY260805
Creality CR-TPU White 1kg
Filament - made from TPU eTPU, flexible and glossy, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 240°C, print mat temperature: 60°C, recommended print speed: from 20mm/s to 120mm/s
New arrival
539,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CREAU260729
Creality Soleyin Ultra PLA 1kg Strawberry Milk
Filament - made from PLA, filament diameter: 1.75mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C, recommended print speed: from 30mm/s to 300mm/s
329,-
In stock 4 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CREAU250611
Creality Hyper ABS Grey 1kg
Filament - made from ABS ABS+, eABS and high-speed, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 270°C, print mat temperature: 100°C, recommended print speed: from 30mm/s to 350mm/s
New arrival
439,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CREAU260733
Creality Hyper-PETG Yellow 1kg
Filament - made from PETG high-speed, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 260°C, print mat temperature: 80°C, recommended print speed: from 40mm/s to 300mm/s
New arrival
429,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CREAU260770
Creality Hyper-PETG Red 1kg
Filament - made from PETG high-speed, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 260°C, print mat temperature: 80°C, recommended print speed: from 40mm/s to 300mm/s
New arrival
429,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CREAU260768
Creality Hyper ABS white 1kg
Filament - made from ABS ABS+, eABS and high-speed, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 270°C, print mat temperature: 100°C, recommended print speed: from 30mm/s to 350mm/s
New arrival
439,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CREAU260737
Creality Hyper PLA RFID Orchid Powder 1kg
Filament - made from PLA+, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C, recommended print speed: from 30mm/s to 600mm/s
New arrival
489,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CREAU260756
Creality Hyper PLA RFID Goldfish Yellow 1kg
Filament - made from PLA+, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C, recommended print speed: from 30mm/s to 600mm/s
New arrival
489,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CREAU260750
Creality Hyper ABS Pink 1kg
Filament - made from ABS ABS+, eABS and high-speed, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 270°C, print mat temperature: 100°C, recommended print speed: from 30mm/s to 350mm/s
New arrival
439,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CREAU260735
BIQU CryoGrip Pro Frostbite Orange for PRUSA XL
Printer Bed - rough rough texture, for Prusa XL 3D printers, adhesion at room temperature, 7-layer design, self-recovering coating, only suitable for printing from PLA, PETG and ABS
New arrival
1,699,-
In stock 4 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
BITR260105
Creality Hyper ABS Orange 1kg
Filament - made from ABS ABS+, eABS and high-speed, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 270°C, print mat temperature: 100°C, recommended print speed: from 30mm/s to 350mm/s
New arrival
439,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CREAU260734
Creality Hyper-PETG Green 1kg
Filament - made from PETG high-speed, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 260°C, print mat temperature: 80°C, recommended print speed: from 40mm/s to 300mm/s
New arrival
429,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CREAU260766
Creality Hyper ABS Yellow 1kg
Filament - made from ABS ABS+, eABS and high-speed, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 270°C, print mat temperature: 100°C, recommended print speed: from 30mm/s to 350mm/s
New arrival
439,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CREAU260738
Creality Hyper ABS Red 1kg
Filament - made from ABS ABS+, eABS and high-speed, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 270°C, print mat temperature: 100°C, recommended print speed: from 30mm/s to 350mm/s
New arrival
439,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CREAU260736
Filament Spectrum ASA 275 1.75mm Deep Black 4.5kg
Filament - made from ASA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 4,5kg, print temperature: up to 260°C, print mat temperature: 80°C, recommended print speed: from 30mm/s to 350mm/s
Filament Spectrum PET-G Premium 1.75mm Dark Grey 8kg
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 8kg, print temperature: up to 255°C, print mat temperature: 80°C, recommended print speed: from 30mm/s to 350mm/s
Alza Benefit slevy - 3D Printers - additional info
3D printers are a special type of printer that are used for spatial printing to create three-dimensional objects from special materials. 3D printers are mainly used in industries which deal in the production of plastic elements or the production of spare parts for various purposes. Also available are non-commercial printers for the home.
Was this information useful?
This form is used only for evaluating the information in the description above.
If you have any question about our products, services, transport or any other request, please contact our customer support.
If you have any question about our products, services, transport or any other request, please contact our customer support.
What should be improved? Is anything missing here? Is anything wrong? Share it with us.
