Archive - 3D Printing Accessories
Choose an alternative in the category
3D Printing Accessories
85
Results
3D Printer Accessory - 7mm brass gear, mounted on the shaft, original spare part, motor dimensions 41 × 41 × 42 mm, shaft length 13,5 mm, step angle 1.8°, 4.83 V power supply, current 1.5 A, speed of 1,000 rpm, torque 0.4 NM, working temperature -20 to 50 °C
Discontinued
Order Code:
MP00209PS36
Discontinued
Order Code:
MP00209PS18
3D Printer Accessory - original extrusion nozzles for Creality Ender 3/5 and CR-10 series 3D printers, 8pcs in the package, diameters: 0.25/0.4/0.4 and 0.6mm
Discontinued
Order Code:
CRE_NOZKITG01
3D Printer Accessory - removable magnetic pad, dimensions 235×235×1mm, suitable for PLA, ABS, TPU, nylon and other materials, high temperature resistant
Discontinued
Order Code:
CRE_MAG01
3D Printer Accessory - for drying and storing filaments for FDM 3D printers, 8 drying levels (35 -70°C), 360° air circulation, thermal fuse, capacity: 2 rolls
Discontinued
Order Code:
CREDRYBOX
3D Printer Accessory - for cleaning and curing resin 3D models, 360° rotatable platform, height adjustable holder, UV curing, max. model size for cleaning/curing: 170×120×160mm / 165×165×200mm
Discontinued
Order Code:
CRECURWASH
3D Printer Accessory - for Creality Ender 3, raises the Z axis by 10cm, aluminium profile: 50cm, threaded rods: 45cm
Discontinued
Order Code:
CREAXIS
3D Printer Accessory - for Creality Ender, for engraving on wood, skin, paper and.., adjustable focus, contains a 405nm blue-violet laser, connection module with cable, wooden plates and safety glasses
Discontinued
Order Code:
CRE4w
3D Printer Accessory - for Creality Ender, for engraving on wood, skin, paper and.., adjustable focus, contains a 405nm blue-violet laser, connection module with cable, wooden plates and safety glasses
Discontinued
Order Code:
CRE16w
3D Printer Accessory - for Creality Ender, for engraving on wood, skin, paper and.., adjustable focus, contains a 405nm blue-violet laser, connection module with cable, wooden plates and safety glasses
Discontinued
Order Code:
CRE05w
3D Printer Accessory - filament dryer suitable for printing strings with a diameter of 1.75/2.85/3mm, drying time: 1-24 hours, temperature setting: 35-55°C, prepares printing filament for 3D printing
Discontinued
Order Code:
SUNWa01
Printer Bed - for 3D printers, double-sided printing magnetic PEI pad with a rough and smooth surface, maximum recommended temperature: 110°C, dimensions: 241x254mm, suitable for Prusa MK3 printers
Discontinued
Order Code:
CR109034
Printer Bed - for 3D printers, double-sided magnetic printing PEI pad with a rough and smooth surface, maximum recommended temperature: 110°C, dimensions: 235x235mm, suitable for Ender 3/3 PRO printers
Discontinued
Order Code:
CR109027
Printer Bed - for 3D printers, double-sided magnetic printing PEI pad with a rough and smooth surface, maximum recommended temperature: 110°C, the package includes a magnetic adhesive pad for the bed, dimensions: 235x235mm, suitable for Ender 3/3 PRO printers
Discontinued
Order Code:
CR109010
3D Printer Accessory - cleans and cures 3D models, UV rays (365nm to 405nm), rotating platform, adjustable holder, maximum model size for cleaning: 115 x 65 x 165mm, maximum size for curing: 140x165mm, for greater durability and resistance of 3D models
Discontinued
Order Code:
ANYLCW
Upgrade Kit - for 3D printers, basic control board, 32-bit 120MHz ARM class Cortex-M3LPC1769, suitable as replacement for 3D printers with XYZ, Delta, Kossel Ultimaker or Corexy architecture, on-board operating mode: SPI powered by TMC, operating mode UART, support for LCD2004, LCD12864 , 5" colour touchscreen, supply voltage: 12-24V, dimensions: 110x85mm
Discontinued
Order Code:
tisk3dp005
Upgrade Kit - for 3D printers, basic control board, 32-bit, suitable as replacement for ENDER 3 printer, low power consumption, silent drivers, multiple sources, supply voltage: 12-24V, dimensions: 100x70x25mm
Discontinued
Order Code:
tisk3dp004
Upgrade Kit - for 3D printers, basic control board, 32-bit 120MHz ARM class Cortex-M3LPC1769, suitable as replacement for 3D printers with XYZ, Delta, Kossel Ultimaker or Corexy architecture, equipped with highly modular firmware with open source Marlin 2.0, support for LCD2004, LCD12864 , 5" colour touchscreen, supply voltage: 12-24V, dimensions: 110x85mm
Discontinued
Order Code:
tisk3dp003
Upgrade Kit - for 3D printers, motor driver: BIQU TMC2209 v1.2, suitable as replacement for older models A4988 or DRV8825, ability to control bipolar stepper motor, reduction of energy consumption by up to 75%, maximum number of microsteps: 256, supply voltage: 4.75-28V, dimensions: 20.32x15.24mm
Discontinued
Order Code:
tisk3dp002
Upgrade Kit - for 3D printers, basic control board, 32-bit microcontroller, suitable as replacement for 3D printers with XYZ, Delta, Kossel Ultimaker or Corexy architecture, function: supports 3 colour filaments, CN fan, supply voltage: 12-24V, dimensions: 147 × 95mm
Discontinued
Order Code:
tisk3dp001
3D Printer Accessory - silicone carbon glass plate, recommended temperature range for PLA: 50-70°C, dimensions: 235x235mm, twice as thick as ordinary glass, adhesive structure, especially suitable for Ender 3 and Ender 3 PRO
Discontinued
Order Code:
tisk3dp008
3D Printer Accessory - for Ender 3 v2, all-metal case, aluminium heating and cooling block, isolation silicone case, even printing, thermistor and heating tube temperature range up to 260°C
Discontinued
Order Code:
tisk3dp010
3D Printer Accessory - for Ender 3/PRO, all-metal housing, aluminium heating and cooling block, insulating silicone housing, even printing, thermistor and heating tube temperature range up to 260°C
Discontinued
Order Code:
tisk3dp009
3D Printer Accessory - nozzle set for Creality Ender 3 and Ender 3 PRO 3D printers, brass nozzle: 0.4mm, quality design, sophisticated heating and cooling system for smooth passage of filament and fast strengthening of the model
Discontinued
Order Code:
CR10072