Car Tools reviews and tests
Alza Test Ranks Car Tools Based on User Reviews and Other Data
Rating
Traffic
Advertising
Saleability
Special Price
Car Tools – Test Results
The result for car tools at several price levels is:
What is the Alza Test?
Hundreds of categories, thousands of products, millions of details and user reviews for car tools. How can you make sense of all of this? Try our Alza Test, which guarantees an objective selection based on customers' experiences. How the products from car tools rank are based solely on various data and feedback from actual people who have purchased the products.
1,974
Results
Puller - universal, manual, two-arm
Engine Stand - load capacity 2 000 kg, working range 0 to 2 350 mm, weight 75 kg
Engine Stand - load capacity 450 kg, movable, weight 22 kg
Tyre mounting lever - Includes straight lever (900 mm), 30° bent lever (900 mm), 75° bent lever (600 mm) and 90° bent lever (600 mm)
Spare Part - lever, load capacity of 3000kg, lifting range: 75-495mm, weight: 2,85kg
Spare Part - lever, load capacity of 3000kg, lifting range: 75-495mm, weight: 0,2kg
Car Mechanic Tools - for mounting and dismounting three-point head clamps installed on Opel vehicles, Renault, Smart, PSA, Mercedes, etc.., It is used, for example, for the clamps on the hoses of the air intake system, It is not possible to dismantle this type of tape without using this specialised SATRA socket, Integrated magnets with the socket prevent it from slipping out of the socket, The small size allows working in very tight places, Usage : 30 - 45 mm and 60 - 80 mm, Hexagon size - 11 mm, Length: 30 mm, Material Cr-V
Car Mechanic Tools - allows you to measure pressure in the range of 1 to 3 bar, The device is designed to check the turbocharger, The product allows fast and accurate diagnosis. The set is packed in a practical carrying case, Main product features: Purpose of use: for professionals, Foam insert protects the pressure gauge, Pressure measurement range: -1 - 3 bar, Weight: 0.7 kg, Device: Suitcase, Pressure gauge, Flexible hose, Tip (2 pcs. ), 2.5" pressure gauge, range: -1 to 3 bar, Flexible cable L=2m
Car Mechanic Tools - enables measurement of high fuel pressure in common rail systems, Equipped with pressure gauge up to 2000 bar with safety valve, Allows measurements to be taken during engine start-up and continuous operation, to measure the maximum pressure, test the pressure regulator and check the injectors in BOSCH systems, SIEMENS, DEPHI, DENSO, Contents of the set: Pressure gauge 0 - 2000 Bar, Flexible pipe L=500mm - 4 pcs, Adapters for pipes M12x1,5 - 2 pcs, Adapters for pipes M14x1,5 - 2 pcs, Blanking adapters M12x1,5 - 6 pcs, Blanking adapters M14x1,5 - 6 pcs, Overflow tank - 1 pc, Bosch CP1 / CP3 pressure regulator adapters, Delphi DFP1 / DFP3, Denso HP1 / HP2 / HP3, Siemens DCP1 DCP2, Siemens system key
Compression Tester - allows you to measure compression pressure in gasoline and diesel engines, Compression gauge with a range of 0-40 bar (0-600PSI), Kit includes a set of adapters for glow plugs, including: Alfa Romeo, BMW, Chrysler, Citroen, Daewoo, Fiat, Ford, Honda, Hyundai, Isuzu, Jeep, Kia, Lada, Lancia, Land Rover, LDV, Mazda, mercedes, MG, Mitsubishi, Nissan, peugeot, Renault, Rover, Saab, Ssangyong, Suzuki, toyota, VAG, Vauxhall/Opel, Volvo, Adapters for M20 injectors, M22, M24 and Stanadyne injectors, Spark plug adapters 10, 12, 14, 18 mm.
Car Mechanic Tools - for plugging solid pipes (steel, copper, etc. ), Prevents fluid loss in fuel, brakes, air conditioning and power steering (including loops, etc. ) during assembly or disassembly of individual elements, Set contents:2 pcs. clamps for ring clamps, 2 pcs. clamps for 8mm pipes, 2 pcs. clamps for 10mm pipes, 2 pcs. clips for 13mm cables
Car Mechanic Tools - works with injection pump lock HP 906 260 00, App: FORD Transit (11-), LAND ROVER Defender (01-15), Engine 2.2 TDCi (Puma) (-2011), OEM Ford: 303-249-1, OEM Mazda: 49UN30324901
Car Mechanic Tools - for mounting bearings of automatic 7-speed DSG transmissions VW/Audi Quatros QS80056, App: Checking and adjusting the position of clutch bearings in automatic 7-speed DSG gearboxes, Volkswagen / Audi 2011, VW OEM T10466
Car Mechanic Tools - specialised seals for air conditioning systems, Type HNBR (Hydrogenated Acrylonitrile Butadiene Rubber):, Wide operating temperature range from -30 °C to + 150 °C (-20 °F to +302 °F), high mechanical strength and increased abrasion resistance, water resistance, oils and silicone lubricants with the addition of anti-corrosive agents, fuels with a high content of aromatic compounds (petrol, alcohol mixtures) of ketones, esters, ether, etc.., ozone and weather conditions, hydraulic fluids type HFA, HFB and HFC, to acids and alkalis at very high temperatures, Included sizes:5,29x1,78mm-20pcs., 6,07x1,78mm-20pcs. 6,8x1,9mm - 20pcs., 7,65x1,78mm-20pcs., 7,8x1,9mm -20pcs, 8x2mm-20pcs.., 8,8x1,9mm-20pcs., 10,82x1,78mm-15pcs., 10.77x2.62mm-15pcs.., 11x2mm-15pcs, 12x2mm-15 pcs., 13,9x1,8mm- 10pcs., 13,95x2,62mm-10pcs., 14x2mm-10pcs.., 15x2mm-10pcs.., 17x2mm-10pcs, 17.17x1.78-10 pcs, 17,04x3,53mm - 10 pcs.
Car Mechanic Tools - for uncoupling and riveting of simplex and duplex Mercedes-Benz timing chains, MERCEDES engines: 1.7D, 2.1D, 2.2D, 2.7D, 3.0D, 3.2D, 3.9D and 4.0CDi, CHRYSLER/JEEP engines: 2.2D, 2.7D, 3.0D CRD, Timing chain riveting tool for most Mercedes models, recommended by the manufacturer as a service tool for single and double chains, prevents the need to remove the chain housing on petrol and diesel engines, Convenient chain disconnection for timing belt replacement or engine repair, The set also includes temporary fasteners to facilitate work, MERCEDES OEM: OEM112589096300, OEM602589003900, OEM602589023300, OEM602589024000, OEM602589056300, OEM602589056301
Car Mechanic Tools - for pipe and exhaust pipe cutter Quatros QS14761-C, The subject of the offer is a chain for exhaust pipe cutter, Cutting diameter: 20 - 75 mm, Blades made of high quality steel HRC55.
Car Mechanic Tools - for assembly and disassembly of diesel injectors, set of 4 pieces in plastic cassette - QUATROS QS20650, Used for loosening or tightening the pressure nut on the injector holder, For example. for Mercedes-Benz, MAN, Setra, Neoplan, etc. Also suitable for some Iveco commercial vehicles, Scania and Renault, Set includes:1x 4-tooth head, Guide 6 edge 32 mm, length 70 mm, thread M14x1,5, for Mercedes-Benz, Neoplan and Setra, 1x 4-tooth head, Guide square 1/2", length 72 mm, 1x 3-tooth head open, length 120 mm, for Mercedes-Benz and MAN, for Mercedes-Benz and MAN
Car Mechanic Tools - QUATROS QS24113 double-hinge hose clamp puller with locking mechanism, Elongated design allows working in hard-to-reach places, Lock that fixes the jaw opening, Working range: 0-50 mm, Length: 430 mm
Car Mechanic Tools - on the retaining rings, 90° angles, 210 mm, Pliers bent at 90°, scalloped, Length 210 mm
Car Mechanic Tools - for mounting/dismounting spring belts on vehicles with 2.0 TDI (BKD) engines of the VAG group (including VW: Passat 2005-, Touran, Golf V; ŠKODA Octavia; AUDI A3), Especially recommended for clamps located in hard to reach places, e.g. Maximum tape diameter: 55 mm.
Car Mechanic Tools - allow use with different types of clamps on vehicle hoses, Elongated design and curved jaws allow working in hard to reach places, Lock that fixes the jaw opening, Working range: 0-50 mm, Length: 430 mm
Car Mechanic Tools - for timing belt replacement on BMW engines, BMW E53/E60/E61/E63/E64/E65/E66/N62/N73 3.6/4.0/4.4/4.8/6.0, 3.6L N62 B36A: E65/E66 735i/735Li (2002-2003),4.0L N62 B40A: E60/E61 540i (2005-2010), E65/E66 740i/740Li (2005-2008),4.4L N62 B44A: E53 X5 4.4i (2003-2007), E65/E66 745i/745Li (2002-2005), E60/E61 545i (2003-2006), E63/E64 645Ci (2003-2006),4.8L N62 B48B: E53 X5 (2004-2007), E65/E66 750i/750Li (2005-2008), E60/E61 550i (2005-2010), E63/E64 650i (2005-2010),6.0L N73 B60A: E65/E66 760i/760Li (2002-2008),
Car Tools reviews and tests
Chcete doručiť tovar na Slovensko? Prezrite si
Náradie do auta
Magyarországra rendelnél? Látogasd meg ezt a termékkategóriát
Autós szerszámok