Alza Benefit slevy - Car Tools
Program pro zaměstnance a VIP klienty zapojených firem a organizací
332
Results
Puller - manual, three-armed, length 205 mm, span 200 mm, weight 5,75 kg
Car Mechanic Tools - the set includes a key, removable drive shaft handle, 32 and 33 mm sockets and a straight pin for unscrewing the screws after loosening, in a plastic case, high torque of 6000 Nm, shank diameter 1", material alloy steel 40cr
Car Mechanic Tools - instrument for checking the turbocharger and cooling system and detecting leaks
Spray Gun - professional paint gun, container volume: 0.6 liters, connection: M16 × 1.5, working pressure: 3.5 - 5.0 bar, air connection: 1/4" GZ, dia. consume. air: 396 l/min, weight: 0.7kg
Car Mechanic Tools - pipe dimension: 50.8 × 233 mm, working pressure: 6,2 bar, air connection: 1/4" GW, power cord: 10 mm, average air consumption: 170 l/min, length: 345 mm, weight: 1.5kg
Car Mechanic Tools - Extremely high power of the pneumatic chisel for unscrewing corroded or seized joints, the impact required to loosen wheel bearings, bushings, tapered joints (e.g. pins), corroded and seized bolts, good for lubricant distribution and tensioner bearing removal, rust and paint removal, fastening of the chisels by means of a quick coupling, 1/4" connection, 19 needles, 4500 beats/min, 350 mm, stroke length 43 mm, 1.97 kg, working pressure 6,3 bar
Hand Pump - manual, rotary, barrel pump, for pumping non-aggressive chemicals, acids, I'm sorry, Diluted, gasoline, diesel, oils, ethyl alcohols
Puller for bearings, pulleys and gears - hydraulic, double-arm, span 100 - 350 mm
Spray Gun - professional paint gun, container volume: 0.6 liters, connection: M16 × 1.5, working pressure: 3.5 - 5.0 bar, air connection: 1/4" GZ, dia. consume. air: 396 l/min, weight: 0.7kg
Car Mechanic Tools - measuring tools, creating pressure and vacuum, with accessories Jonnesway AI040031, double-acting pump, which creates a vacuum of up to -0, 75bar and pressure up to +4bar, use: such as brake bleeding, checking vacuum sensors, Exhaust gas recirculation valve, throttle valve, fuel pressure regulator, pressure modulator in automatic transmissions, brake booster etc., Content: metal pump with pressure gauge in the range -1 to 4bar, flexible cable with a diameter of 6 mm, length 600 mm - 2 pcs, a set of connection terminals and plugs, set of connection clamps with cables, set of cable connectors, container with a two-necked lid - additional lid for the container, CONTROL PROCEDURE: 1. Connect the pump to the part to be inspected using a suitable spike, use the rotary head to adjust the operating range (IN - vacuum, OUT - pressure), create pressure or vacuum by pumping and monitor the pressure gauge, the pump is not used directly for suction of liquidsThe additional container is used for this purpose, which is pa
Car Mechanic Tools - Torque multiplication jigs 1:5 1500Nm
Puller - universal ball stud puller, hydraulic, 39 mm, for MAN trucks, mercedes, SCANIA
Car Mechanic Tools - set of ten wrenches for Tesla locking nuts
Car Mechanic Tools - the device is suitable for both 6V and 12V charging
Compression Tester - allows you to measure compression pressure in gasoline and diesel engines, Compression gauge with a range of 0-40 bar (0-600PSI), Kit includes a set of adapters for glow plugs, including: Alfa Romeo, BMW, Chrysler, Citroen, Daewoo, Fiat, Ford, Honda, Hyundai, Isuzu, Jeep, Kia, Lada, Lancia, Land Rover, LDV, Mazda, mercedes, MG, Mitsubishi, Nissan, peugeot, Renault, Rover, Saab, Ssangyong, Suzuki, toyota, VAG, Vauxhall/Opel, Volvo, Adapters for M20 injectors, M22, M24 and Stanadyne injectors, Spark plug adapters 10, 12, 14, 18 mm.
Alzaboxes and stores
Car Mechanic Tools - Induction heating device for loosening sealed joints without using direct fire
Puller - puller for mounting and dismounting wheel bearing and hub for VW ŠKODA AUDI, for diameter 72 mm, Designed for easy removal and precise mounting of the bearing in the hub, mounting plate has 8 holes, for vehicles: Audi A2, Skoda Fabia (2000), Volkswagen Polo and Fox (2005-), Seat Ibiza (2002-)
Puller for bearings - manual, double arm, length 380 mm, span 8 - 32 mm, weight 1 kg
Service Set - for removing silentblocks and bearings 18 - 74 mm, set of 52 discs for mounting and dismounting bearings, cases, seals and rubbers, Adapter set for bearing drive, metal-rubber bushings and pins 52 elements
Car Mechanic Tools - compression measurement kit, universal for diesel and petrol, 44 parts in total, pressure gauge with a range of 0-40 bar (0-600 psi), high-pressure rubber hose with drain valve, 26 pcs of adapters for glow plugs, 4 spark plug adapters, 90° adapter
Free deliveryAlzaboxes and stores
Grease Gun - manual, maximum pressure 55.1 MPa, cartridge, with non-slip handle, hose attachment included