Cheap car Tools
On this page you will find car Tools at the lowest prices, more so all car Tools ranked from the lowest to the highest price. It will be easier to see products that are now marked at their lowest price. The item with the lowest price in this category is ACI wedge holder for plastic DOMAR foundation marked at 46 Kč incl. VAT. Is this what you’re looking for?
2,013
Results
Car Mechanic Tools - Brake and hydraulic clutch bleeder kit 9 brake bleeder wrenches, Interchangeable pass-through wrench, Adapter sizes 7/8/9/10/11 /12 mm - in colour, 1.2 mm silicone hose and check valve.
Locking Tool - Volvo 2.0 / 2.4 / 2.5 engine phase adjustment and checking kit
Car Mechanic Tools - for cleaning bullets and pins, as well as for impact tools, made of silicon carbide, has high resistance to abrasion and corrosion, Tool holder size 1/2" (12.7 mm), the brush is equipped with a Velcro fastener, the height of the brush is 95 mm and its outer diameter is 150 mm and the inner diameter is 90 mm, silicon carbide material, Velcro
Car Mechanic Tools - tools for bodywork, universal, 7 pieces set, in a plastic case, downloading, tapping, straightening, ground work surfaces, walnut (hickory)
Locking Tool - fixture for locking Ford, Mazda, Volvo 1.8/2.5Di TD TDCI 1.2/1.4/1.6/1.8/2.0/2.3 16V, Yato YT-06021 with petrol and diesel engines
Car Mechanic Tools - for use in tyre service and industry, dimension: 6.5 × 10 mm, length: 10m
Locking Tool - tools for installation/removal of elastic belts STRETCH FIT 5pcs
Puller - for McPherson springs, with replaceable jaws, for springs with diameter 23 - 280 mm, in plastic case, universal
Locking Tool - engine timing arrestor, Ford 1.8 TDDI / TDCI / TD / TD / D, Ford Focus, Mondeo, C-MAX
Brake Piston Press - practical brake piston compressor set with 50 parts
Pressure Meter - for quick leak checking of the automotive cooling system, Set contains 12 adapters and adapters for different car brands, a thermometer and a hand pump, analogue pressure gauge, 0-2.5 bar and 0-35 PSI hose, temperature range 0-200 °C, stored in a plastic case
Pressure Meter - set for compression testing of petrol engines and detection of leaks in the engine, includes analogue pressure gauge 0 - 20 bar and 0 - 300 psi, flexible hose 30 cm long, 2 aluminium extensions with rubber end for spark plug hole, plastic case
Car Mechanic Tools - designed for crimping steel ends, copper ones, aluminium and bronze brake pipes, for cables with a diameter of 4.75 mm, 6.35 mm
Locking Tool - locking of engine timing, mercedes, Chrysler, Jeep, 1.8, 2.0, 2.2, 2.7, CRD
Car Mechanic Tools - Seal function tester under the cylinder head, CO2 measurement, detection of a cracked block or engine head, detection of a damaged head gasket, use for petrol, diesel and gas engines, in a set of 250 ml of reaction liquid, empty containers, adapter with quick coupler, bayonet adapters for Mercedes-Benz vehicles, GM (Buick), Jeep, peugeot, Subaru, Chrysler, Acura, GM (Nova, Spectrum and Sprint) Mitsubishi, Nissan, Mazda, toyota, Infiniti, Geo, Suzuki, Isuzu, Ford, Honda, Mitsubishi, plastic case
Standard Socket Set - 5 piece wrench set for injection units, injectors, injectors Cav Bosch Lucas
Car Polisher 1400W, max. speed: 3000rev/min, sanding plate diameter: 180mm, weight: 2,8kg
1,798,-
In stock 2 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
AUPR15982
Pressure Washer - cordless, portable, max. pressure: 25 bar, flow rate: 150l/h, pressure control and self-suction
1,799,-
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
FIELD223
Jack - hydraulic, low-profile, mobile, with safety valve, rubberised lifting surfaces, grip handle, with carrying handle, load capacity 2500 kg, manual drive, lift height from 85 to 385 mm, handle length 500 mm, dimensions 160 × 210 × 560 mm (H×W×L), weight 12.8 kg
1,799,-
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CARaaa0796
Hand Pump - manual, rotary, barrel with handle, for pumping diesel, kerosene, machine oil, low viscosity lubricants, water, water-based chemicals, weak acids and alkalis
Car Mechanic Tools - tool for honing cylinders 55-170 mm 102 mm, The honing machine is designed for cylinders 2'' - 7'', fits any drill, is equipped with a flexible connector and has the possibility of changing grinding stones, working range 51-177 mm, total length approx. 305 mm, length of the stone 102 mm, grinding should only be carried out when, when the stones are completely inside the cylinder (the stones must be in constant contact with the wall), specially shaped arms press the honing stones evenly and precisely against the cylinder wall, when honing, small vertical movements must be made, to obtain a suitable pattern (diamond shape - better piston lubrication)
Cheap car Tools
Chcete doručiť tovar na Slovensko? Prezrite si
Náradie do auta
Magyarországra rendelnél? Látogasd meg ezt a termékkategóriát
Autós szerszámok