This page includes the most expensive car Tools MAGNUS, or more specifically all products from the category car Tools MAGNUS sorted from the most expensive to the cheapest. This way, the most luxurious pieces can stand out. At the moment, the most expensive product is Magnus MGS01730 Hydraulic wheel hub puller with reverse hammer, which costs 6,756 Kč incl. VAT. Check it out, you may like it. Or you’ll get inspired.
19
Results
Car Mechanic Tools - Perforating set for adjusting brake pipe ends, hydraulic spindle
Car Mechanic Tools - Preparations for draining, bleeding and changing fluids in brake systems and hydraulic clutches
Puller - set for removing ball joints of Mercedes Benz front and rear suspension, the set contains 10 elements enabling servicing (mounting and dismounting) of specific ball joints in Mercedes suspension, C-moulded steel
Locking Tool - professional timing set for a wide range of Citroen, Peugeot, Opel and Toyota vehicles with 1.0 and 1.2 VTi/PureTech/GDI engines from the EB0, EB2 family
Car Mechanic Tools - Set of 22 adapters and pneumatic press for removing VW brake pistons, Damage, BMW, Ford, Honda, Jaguar, Mercedes-Benz i, Supported cars: Opel, Citroen XM, Xantia u. a., Alfa Romeo, Audi, Austin, BMW, Ford, Honda, Jaguar, Mercedes-Benz, Mitsubishi, Nissan, Rover, toyota, VW, Mazda, Saab 9000, Subaru, Nissan Primera, VW -Golf IV, Audi 80.90, V8 + 100, Ford Sierra ABS + Scorpio ab 85, Honda Prelude, Nissan Silvia 1.8 turbo, Rover 8000, Subaru L+Z, VW-Golf + Passat, GM Motors, Saab, Renault, Maxima, opel, Citroen C5
Car Mechanic Tools - Brake fluid and hydraulic clutch change kit
Car Mechanic Tools - with Audi adapters, VW, Damage, made of durable plastic, capacity 2 l, the bayonet, 12 oil fill adapters with a hinge for filling in hard-to-reach areas.
Car Mechanic Tools - set of pullers with bearing separators from gears, separator sizes 30-50 mm, 50-75 mm, stop screw 180 mm, extension cords; 4×130, 4×105 mm, Crossbar 160 mm, maximum reach 170 mm, 220 mm
Locking Tool - Volvo 2.0 / 2.4 / 2.5 engine phase adjustment and checking kit
Car Mechanic Tools - Brake and hydraulic clutch bleeder kit 9 brake bleeder wrenches, Interchangeable pass-through wrench, Adapter sizes 7/8/9/10/11 /12 mm - in colour, 1.2 mm silicone hose and check valve.
Puller - professional spring-loaded shock absorber puller with hardened steel housing and pressure screw, strong, solid construction. Provides smooth spring compression, drive: 19 mm hexagonal, Maximum jaw opening 280 mm, Clamp up to 1000 kg
Puller - set of pullers for pins, rods and other suspension elements, possibility of using a pneumatic hammer, 5 items: fork diameter: 18, 24, 29 mm, pneumatic hammer tip, round input 10 mm, tip for striking with a traditional hammer, the elements have flat and smooth surfaces of the spreader wedges and sharp points, that allow effective separation of the tip from the steering rod
Car Mechanic Tools - Hydraulic Brake Line Punching Tools 3/16" 4.75 mm
Car Mechanic Tools - Set of six special wrenches for wiring and wiring and injectors 12 - 19 mm, sizes: - 12 mm - 14 mm - 16 mm - 17 mm - 18 mm - 19 mm, 1/2 inch, key length 100 mm, for injection lines in diesel engines, air conditioning, brakes, electrical connections, electrical sensors
Car Mechanic Tools - for bending brake or air conditioning pipes 3 - 4,75 - 6 mm, maximum bend 180° (mark at 45° and 90°), material: aluminium, for aluminium, brass and copper, maximum bending radius approx. 15 mm
Car Mechanic Tools - Brake pipe wrench, size 10 × 11 mm, length 180 mm, material CR-V cel
Chcete doručiť tovar na Slovensko? Prezrite si
Náradie do auta