Interests with NO competition!.
- Low monthly isntallment
- No pointless overpaying
- Available for purchases with all products marked as *In stock on Alza
- Get the product of your dreams today, without further delay
Pneumatic Tools instalment Purchases with interest rates from 4,9 % p.a.
Úrok
4,9 %
p. a.
Was this information useful?
This form is used only for evaluating the information in the description above.
If you have any question about our products, services, transport or any other request, please contact our customer support.
If you have any question about our products, services, transport or any other request, please contact our customer support.
What should be improved? Is anything missing here? Is anything wrong? Share it with us.
10
Results
Impact Wrench pneumatic, mounting type: impact joint 1/2", 10000 rev/min, 1356 Nm torque
In instalments
from
182,-
In stock 4 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
pne000007
Free deliveryAlzaboxes and stores
Car Mechanic Tools - professional, rivet nut size: M4-M10, strength: 1650 kgf (kG), stroke: 8 mm, working pressure: 6,2 bar, air connection: 1/4" GW, supply hose: 10 mm, average air consumption: 1,5 l/cycle, weight: 1,55 kg
Impact Wrench pneumatic, mounting type: impact joint 1/2", 8800 rev/min, working pressure of the tool is 6,3 bar, 678 Nm torque
Car Mechanic Tools - for Bosch injectors, Delphi, Denso, Siemens, includes extractor and various adapters, compatible with a wide range of injectors on the market
Car Mechanic Tools - Extremely high power of the pneumatic chisel for unscrewing corroded or seized joints, the impact required to loosen wheel bearings, bushings, tapered joints (e.g. pins), corroded and seized bolts, good for lubricant distribution and tensioner bearing removal, rust and paint removal, fastening of the chisels by means of a quick coupling, 1/4" connection, 19 needles, 4500 beats/min, 350 mm, stroke length 43 mm, 1.97 kg, working pressure 6,3 bar
Car Mechanic Tools - drill - angular, max. diameter of the drill bit: 10 mm, direction of rotation: left/right, idle speed: 1 800 rpm. /min, working pressure: 6,2 bar, air connection: 1/4" GW, power cord: 10 mm, air outlet: rear, average air consumption: 113 l/min, length: 210 mm, weight: 1.82 kg, Noise level: 86.1 dBA
Car Mechanic Tools - 3,2-6,4mm, maximum rivet size: 6.4 mm (for steel rivets), 4.8 mm (for stainless steel rivets), crushing force: 1200 kgf (kG), stroke: 14 mm, working pressure: 6,2 bar, air connection: 1/4" GW, power supply: 10 mm, average air consumption: 1,8 l/cycle, weight: 1,94 kg
Car Mechanic Tools - Set of 22 adapters and pneumatic press for removing VW brake pistons, Damage, BMW, Ford, Honda, Jaguar, Mercedes-Benz i, Supported cars: Opel, Citroen XM, Xantia u. a., Alfa Romeo, Audi, Austin, BMW, Ford, Honda, Jaguar, Mercedes-Benz, Mitsubishi, Nissan, Rover, toyota, VW, Mazda, Saab 9000, Subaru, Nissan Primera, VW -Golf IV, Audi 80.90, V8 + 100, Ford Sierra ABS + Scorpio ab 85, Honda Prelude, Nissan Silvia 1.8 turbo, Rover 8000, Subaru L+Z, VW-Golf + Passat, GM Motors, Saab, Renault, Maxima, opel, Citroen C5
Car Mechanic Tools - pneumatic carving machine for carving glued car windows, three blades of size 30 mm, 35 mm and 57 mm, in a plastic case, compressed air drive, speed 22000 beats. /min, working pressure 6.2 bar, ¼" air connection, 10 mm supply hose, air consumption 260 l/min, length 120 mm, weight 1,2 kg
Pneumatic Tools instalment Purchases with interest rates from 4,9 % p.a. - articles
selection guideJak vybrat kompresor
Kompresory se uplatní nejen v autoservisech nebo profesionálních dílnách, ale i v domácnostech. Pomohou vám s huštěním pneumatik, lakováním, ofukováním prachu nebo provozem pneumatického nářadí. V tomto nákupním průvodci vám poradíme, jak se v nabídce zorientovat, jaké...