Archive - Tools for Vehicle Technicians
Choose an alternative in the category
Tools for Vehicle Technicians
619
Results
Discontinued
Order Code:
AUPRnar0398
Discontinued
Order Code:
AUPRnar0399
Discontinued
Order Code:
AUPRnar0395
Discontinued
Order Code:
CARaaa0475
Puller - puller for wheel bearings 75-105 mm, puller designed for bearings placed in the following way, which is inaccessible to normal downloaders, allows the bearing to be removed by squeezing it between two moving elements, which must be screwed together, the puller is used, among other things: bearings, pulleys, gears, seals, also has threaded holes, that allow, that the separator works with a different type of puller designed to remove the bearings, made of durable material (hardened forged steel), eliminates the possibility of bursting and ensures safe operation, Pitch: 75-105 mm
Discontinued
Order Code:
AUPRnara0012
Puller - Jonnesway 90-130 mm hub and drum removal tool, a puller designed for removing bullets, axle shafts, drums, etc., Universal use with 4.3 kg inertia hammer or central screw, The set contains pins with M12x1 thread, 5 and M14x1, 5, Scope: 90 - 130 mm, outer diameter 160 mm, Application: VW, AUDI, sEAT, ŠKODA, ALFA ROMEO, FIAT, FORD, PORSCHE, BMW, MERCEDES, OPEL, CITROEN, PEUGEOT, RENAULT, MAZDA and others
Discontinued
Order Code:
AUPRnara0018
Discontinued
Order Code:
AUPRga0002
Folding Stool , allowing work at low height levels in a more comfortable position
Discontinued
Order Code:
MOTO50560
Discontinued
Order Code:
CARaaa0379
Puller - 8 holes in the column for adjusting the head arm, handling springs with diameters from 102 - 254 mm
Discontinued
Order Code:
AUTnar0047
Puller - Standing mechanical spring puller with a compressive force of 1100 kg
Discontinued
Order Code:
AUTnar0043
Discontinued
Order Code:
AUTnar0037
Car Work Light output: 250 lm, protection level: IP65, weight: 100g
Discontinued
Order Code:
CARaaa0351
Discontinued
Order Code:
CARaaa0344
LED Flashlight - Rechargeable LED workshop lamp, length 320 mm, equipped with main COB-LED 5W + 5 LEDs, lithium cells with a voltage of 3.7 V and a capacity of 2600 mAh, equipped with three strong neodymium magnets, the possibility of changing the angle in the range of 170 degrees, additional retractable hook for hanging, The battery is charged via micro USB
Discontinued
Order Code:
AUPR82462
LED Flashlight - equipped with 3 COB-LEDs, cable length 180 cm, industrial protection IP54, dimensions after folding: 260 × 230 × 40 mm, voltage 230 V, power 30 + 20 W, COB-LED type, number of diodes: 3, luminous flux 4500 lm, cable length 180 cm, number of degrees of angle change: 8, Protection class IP54, weight 1715 g
Discontinued
Order Code:
AUPR82464
LED Flashlight - suitable for checking the leak tightness of the air conditioning system (UV), magnetic base rotatable 360°, USB charging cable + charger, LED output 620 lumens, Charger 5.0 V 2000 mAh / AC100 ~ 240 V 50/60 Hz, Charging time 3.5 hours, Activity time 3 h +, 3350 mAh battery, size 477 × 50 × 40 mm, weight 295 g
Discontinued
Order Code:
AUPR82465
LED Flashlight - Rechargeable workshop lamp with adjustable 3in1 lamp power, flashlight, POWER BANK, 180° adjustable leg with strong magnet, Light emitted by 5W COB-LED in torch mode and 3 LEDs in flashlight mode, clip connected to the magnet, power supply via USB cable, which is included in the set, 2000 mAh lithium battery, dimensions 190 × 55 × 25 mm, weight 260 g
Discontinued
Order Code:
AUPR82463
Puller - Rear axle puller Toyota YARIS 2005-2011 is used only for pressing bushings on the car
Discontinued
Order Code:
AUPR82422
Puller - kit for removing rear silentblocks on Ford Mondeo after 2007 and on 4x4 vehicles, the device is used to mount and dismount the bushings without removing the cross member
Discontinued
Order Code:
AUPR82424
Puller - press for removal and assembly of front lower control arm pivots Renault Scenic II, Clio III, IV, thread size: 18 mm, length 48 mm, width 48 mm, height 65 mm
Discontinued
Order Code:
AUPR82423
Puller - puller for mounting and dismounting wheel bearing and hub for VW ŠKODA AUDI, for diameter 72 mm, Designed for easy removal and precise mounting of the bearing in the hub, mounting plate has 8 holes, for vehicles: Audi A2, Skoda Fabia (2000), Volkswagen Polo and Fox (2005-), Seat Ibiza (2002-)
Discontinued
Order Code:
AUPR82421
Puller - puller for mounting and removing wheel bearing and hub, for 90 mm diameter ASTA A-H190, for easy and quick removal and precise mounting of the bearing to the axle hub, for Audi vehicles: A4/S4 Quattro Avant (2001-2008), A6/S6 Quattro Avant (2002-2005), A8/S8 Quattro Avant (2004-2007), R8 from 2007 onwards, quality design: made of chrome-vanadium (Cr-Mo) steel + S45C steel
Discontinued
Order Code:
AUPR82420
Puller - Hub puller FORD FOCUS II, VOLVO V50, set for mounting and dismounting bearings - wheel hubs with diameter 78 mm
Discontinued
Order Code:
AUPR82431
