CREAlity
We can deliver CREAlity products on the same day! Most products are in stock, so you don't have to wait. Place your order from the comfort of your home and have it delivered to your address, to an AlzaBox, or to one of our stores. Why shop anywhere else but on Alza.cz?
Continue
124
Results
Filament - made from ABS soluble, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 260°C, print mat temperature: 110°C
499,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CRP0624_03
Filament - made from ABS soluble, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 260°C, print mat temperature: 110°C
499,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CRP0624_07
Filament - made from ABS soluble, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 260°C, print mat temperature: 110°C
499,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CRP0624_05
Filament - made from PLA, filament diameter: 1.75mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C, recommended print speed: from 30mm/s to 300mm/s
399,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CREAU250604
Printer Bed -Epoxy print pad for Creality K2 Plus 3D printer, Increased print reliability due to better adhesion of models, consistent print quality across the entire pad area, extended service life thanks to durable surface, easier and faster finishing of finished prints, precise and repeatable placement on the printing surface, size 370 × 370 mm, printing area 350 × 350 mm, temperature resistance up to 120°C, made of flexible steel with epoxy coating
499,-
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CREAU250305
3D Printer Accessory - original replacement stepper motor for Creality 3D printer, compatible with Ender-3 V2 Neo, Ender-3 V2, Ender-3Pro, Ender-3S, Sermoon V1 Pro, Ender-3 S1, Ender-3 S1 Pro, Ender-3 Neo, Ender-2 Pro
159,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CRP0624_18
Filament - made from PLA, filament diameter: 1.75mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C, recommended print speed: from 30mm/s to 300mm/s
399,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CREAU250603
3D Printer Accessory -Compatibility with Creality K2 Plus 3D printer, automatic nozzle cleaning during printing, removing dirt and filament residue from the nozzle, improve print quality and reduce the risk of nozzle clogging, easy installation and replacement, durable plastic and cleaning material, customization of dimensions for the K2 Plus printer
89,-
In stock > 20 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CREAU250306
3D Printer Accessory - Accessories for 3D printers, compatible with PLA filaments, ABS, PETG, TUP, PP, PC, PLA-CF, PA-CF, PET-CF and others, tight fitting against filament leakage, smooth inner walls against clogging, precise processing, no burrs in the hole, compatible with K2 Plus and Creality Hi 3D printers
349,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CREAU250303
Filament - made from PLA, filament diameter: 1.75mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C, recommended print speed: from 30mm/s to 300mm/s
389,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CREAU250614
Filament - made from PLA, filament diameter: 1.75mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C, recommended print speed: from 30mm/s to 300mm/s
349,-
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CREAU250608
Filament - made from PLA, filament diameter: 1.75mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C, recommended print speed: from 30mm/s to 300mm/s
349,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CREAU250611
3D Printer Accessory - Four to 16 colours in one print, wide compatibility, simple setup and operation, crisp and clean colour transitions, durable design for long life and stable performance
-10 % off new
6,669,-
New 7,489,-
As good as new - in stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CREAU240909
3D Printer Accessory - RepRap stepper motor, step angle: 1.8 degrees, quality workmanship, reliable quiet operation, for almost all types of 3D Creality printers
189,-
Unsealed - in stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CR10075
3D Printer Accessory - original replacement stepper motor for Creality 3D printer, compatible with CR-10S Pro V2, Ender-3 V2 Neo, Ender-3 Max Neo, Ender-3 Max_Ender-3 S1 Pro, Ender-3 S1 Plus, Ender-3 Neo, Ender-2 Pro, CR-M4, CR-10 SE
-5 % off new
159,-
New 169,-
Unsealed - in stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CRP0624_19
3D Printer Accessory - Accessories for 3D printers, compatible with PLA filaments, ABS, PETG, TUP, PP, PC, PLA-CF, PA-CF, PET-CF and others, tight fitting against filament leakage, smooth inner walls against clogging, precise processing, no burrs in the hole, compatible with K2 Plus and Creality Hi 3D printers
-25 % off new
259,-
New 349,-
Unsealed - in stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CREAU250303
3D Printer Accessory - motherboard CrealityEnder-3 S1 + 8GB SD card
-27 % off new
909,-
New 1,259,-
Unsealed - in stock 4 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CRP22_11
3D Printer Accessory - water cooler with efficient heat dissipation, quiet operation, for heat resistant filaments (ABS, PETG), long service life, use of coolant required, for combination with Sprite Extruder Pro, designed specifically for Creality CR-10 Smart Pro and Creality Ender 3 S1 Pro 3D printers, 1× water cooling pump included, 2× mounting clamps, 1× cooling block, 1× cooling tube, 2× screw M3×16, 2× T-Nut, 2× M2×12 screws and 1× adapter
3D Printer Accessory - multicolour module, automatic switching of up to 4 filaments, RFID filament management, detection of running and tangled filament, moisture protection with desiccants, for filaments 1,75mm
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C, recommended print speed: from 30mm/s to 600mm/s
Engraving Machine Accessories - 2× lime wood, 2× unbleached kraft paper, pack of coloured paper, pack of felt coloured paper, dimensions 150 × 150 × 3 mm
Filament - made from PLA fluorescent, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 120mm/s
3D Printer Accessory - made of hardened steel and copper alloy, smooth inner wall, Temperature resistance up to 500 °C, corrosion and wear, package contains 8 nozzles (2×0.4 mm copper alloy nozzles, 1×0.6 mm, 1× 0.8 mm and 2× 0.4 mm hardened steel nozzles, 1×0.8 mm)
3D Printer Accessory - motherboard for Creality Ender 3, increases print sensitivity and accuracy, 32-bit microcontroller, possibility to connect a temperature sensor, noise level up to 50dB