Archive - Headphone Accessories
Choose an alternative in the category
Headphone Accessories
1,980
Results
Bluetooth Adapter - universal Bluetooth transmitter for TV and home audio systems, aptX Low Latency codec, range up to 10m, Bluetooth 4.0, option to connect 2 headphones at the same time
Discontinued
Order Code:
MEE050a
Headphone Amp with docking station for FiiO devices, expandable with DAC via FiiO X1, X3II, X5II, X7, E17K, distortion <0.002%, output 6.3mm jack, 4x CINCH, power 1.5W
Discontinued
Order Code:
FII003c
Headphone Amp - battery-powered, 2 x 3.5mm stereo headphone jack output, high-capacity Li-Pol battery (ca. 8 hours battery life), LED indicator, on / off switch and volume control with one knob, adjustable boost for use with any headphones, compatible with headphones with an impedance of 16-100 Ohm, micro USB port for charging, 3.5mm stereo jack input
Discontinued
Order Code:
MAU042
External Sound Card - digital-to-analog converter, amplifier, max. power 50 W + 50 W, 5.1ch, 127dB signal-to-noise ratio, 24bit/192kHz, built-in stereo microphone, BT, NFC, USB host, microUSB, 3.5mm and 6.3mm input jack, 3.5mm and 6.3mm output jack
Discontinued
Order Code:
HC150g2
Headphone Amp - for Sony Walkman, Sony Xperia, iPhone/iPad/iPod, 10-100 kHz frequency range, up to 6 hours playback, silicone straps for easy attachment to phone, compatible with USB audio port
Discontinued
Order Code:
JW908i
External Sound Card - Micro USB, sampling frequency 48 kHz, bit depth 24 bit, LED indication, phantom power supply + 48V and potentiometers, cable interface: USB-A and USB-C
Discontinued
Order Code:
SHU125a
Discontinued
Order Code:
UY007z2
Headphone Amp - with battery power, portable, 3.5 Jack headphone, 1400 mAh battery, up to 16 hours battery life, Bass Boost, two integrated amplifiers, 92g weight
Discontinued
Order Code:
FII022a2
Headphone Amp impedance headphones least 160 ohms, LED indicator Frequency range is 10 Hz - 100 kHz ± 0.5 dB., Distortion <0.005%
Discontinued
Order Code:
MCG1004a2
Headphone Amp impedance headphones least 160 ohms, LED indicator Frequency range is 10 Hz - 100 kHz ± 0.5 dB., Distortion <0.005%
Discontinued
Order Code:
MCG1004a1
DAC Transmitter compact integrated amplifier with an output 2x30Watt (8 ohm) or 2x60Watt (4 ohm), USB, Bluetooth module APTX, coaxial SPDIF 24 / 192kHz and optical Toslink, RCA output for an active subwoofer, headphone output
Discontinued
Order Code:
MCG1001a2
DAC Transmitter compact integrated amplifier with an output 2x30Watt (8 ohm) or 2x60Watt (4 ohm), USB, Bluetooth module APTX, coaxial SPDIF 24 / 192kHz and optical Toslink, RCA output for an active subwoofer, headphone output
Discontinued
Order Code:
MCG1001a1
Accessory - AD/DA Converter 24bit/192kHz and headphone amplifier, MAC compatible, 4 DACs per channel, LED for status and level indication
Discontinued
Order Code:
APG05a
Headphone Amp with professional specifications, 4 headphone outputs independently controllable, 150mW per channel, press Mono
Discontinued
Order Code:
PSN009
Set digital-to-analog converter with amplifier and speakers
Discontinued
Order Code:
HC150g9a
Headphone Amp - high class, made of a single piece of mahogany, portable, powered by two batteries 9V, up to 50 hours of operation, power adapter
Discontinued
Order Code:
GRD0010a1a
Headphone Amp Upper class made of one piece of mahogany, portable, powered by two 9V batteries, up to 50 hours of operation
Discontinued
Order Code:
GRD0010a1
Set digital-to-analog converter with amplifier and speakers
Discontinued
Order Code:
HC150g9
Accessory - noise protection from ambient noise, 15dB sound reduction, even sound dampening without excessive distortion
Discontinued
Order Code:
CPY1001e1
Accessory - special foam memory headphone brackets, noise insulation and Wax-Guard preventing dirt from the ear to the headphones, diameter 12.45mm ± 0.50mm, 3 pairs
Discontinued
Order Code:
CPY1001d4
Accessory Special Memory Foam Extensions, Wax-Guard, Wax-Guard, Wax-Guard, 12.45 mm ± 0.50 mm, 3 pairs
Discontinued
Order Code:
CPY1001d3
Accessory - special memory foam ear tips, version with maximum noise insulation and Wax-Guard mesh, prevents earwax transfer from ear to the headphones, diameter 12.45mm ± 0.50mm, 3 pairs
Discontinued
Order Code:
CPY1001d2
Accessory - Special Memory Foam Extensions, Wax-Guard, 12.45mm ± 0.50mm, 3 pairs
Discontinued
Order Code:
CPY1001d1
Accessory The special foam memory attachments, thanks to their insulating properties, also hold on wet skin, diameter 10.67 mm ± 0.50 mm, 3 pairs
Discontinued
Order Code:
CPY1001c4