Cheap measuring Devices

Laser Distance Meter - with measuring length up to 40 metres with functions for measuring length, volume, content, measurement using two reference points and memory for 30 measurements. The rangefinder supports the functions of addition, subtraction of measured values, the possibility of continuous measurement, calculation of the size of a third party according to Pythagorean theorem. The rangefinder supports the function of automatic switch-off of the laser after 20 seconds and complete switch-off of the device after 2.5 minutes in case of inactivity.

Multimeter - digital, AC voltage, DC voltage, DC current, resistance, temperature, diode, battery with status indication and AC current checking, CAT III measurement category, IEC 61010 and CE standard, LED flashlight, dimensions 168 × 83 × 35 mm (H×W×D), weight 310 g

Caliper - digital stainless steel sliding scale, 0-150mm, display backlight, resolution: 0.01mm, accuracy: ± 0.02mm (0-70mm), accuracy: ± 0.03mm (>70mm), battery: 3V type CR2032, packed in a plastic box

Multimeter - digital, AC voltage, DC voltage, DC current, diode, frequency and continuity (buzzer) checking, CAT III measurement category, automatic shutdown, battery indication and true RMS, powered using battery (included in the package)

Multimeter - digital, AC voltage, DC voltage, DC current, resistance, diode, transistor, continuity (buzzer) and AC current checking, CAT III measurement category, CE standard, automatic shutdown, battery indication, overload protection, manual range selection, audible signal, data hold and adjustable LCD display, dimensions 190 × 90 × 33 mm (H×W×D), weight 360 g

Laser Distance Meter - measuring range 20 cm to 40 m, accuracy +- 3 mm, with distance measuring functions, volume and area, calculations are performed directly in the instrument, automatic shutdown function after 30 seconds of inactivity, powered by a 3.7V Li-Ion battery with a capacity of 380 mAh, charging via USB cable, dimensions 100.5 × 38 × 24.5 mm

Metre

Caliper - stainless steel, measuring range: 0 - 200mm, accuracy: 0,02mm

Multimeter - digital, AC voltage, DC voltage, DC current, resistance, capacity and AC current checking, CAT IV measurement category, automatic shutdown, backlit display and true RMS, powered using battery (included in the package)

Metre

Digital Thermometer - surface temperature measurement, range -50 °C to +550 °C, continuous measurement, measurement time 0.5 s, working distance 0,3-1,2 m, 650 nm laser aiming point, 3 levels of emissivity according to the surface, backlit LCD display, switching of °C/°F units, automatic shutdown after 1 minute, power supply 2× AA 1,5 V not included, weight 0,201 kg

Metre

Voltage Tester - measures AC voltage from 12000 mV to 690 V and DC voltage from 12000 mV to 690 V, bipolar, analog, for home use, measurement readout: LED and acoustics, continuity test, phase detection and phase sequence determination, safety category CAT III, CE, uncalibrated, IP rating IP54, uses 1 9V battery, battery and instructions included

Inspection Camera Waterproof USB high resolution 1280x960 camera with 1/9" VGA CMOS, mirror, android, 5m cable

Multimeter - digital, AC voltage, DC voltage, DC current, resistance, temperature, diode, frequency, capacity and AC current checking, CAT II and CAT III measurement category, automatic shutdown, powered using battery (included in the package), dimensions 130 × 65 × 32 mm (H×W×D), weight 138 g