Archive - Drills
Electric drills are suitable for use in the workshop. They are powered directly from the mains, so there operating time is unlimited. The downside is that the power cable limits the length at which you can work from the mains supply. When choosing a power drill, it is important to know what kind of material you will be drilling.
Choose an alternative in the category
Drills
622
Results
Hammer Drill -power consumption 850W, idle speed 0-2800/min, number of hammers 0-27000/min, drill bit max. 13mm, max. drilling in wood 25mm, max 13mm drilling, max 13mm drilling, weight 2.7kg
Discontinued
Order Code:
MAD0030
Drill - 680 W, with hammer, speed up to 2800 RPM, maximum torque: 10,8 Nm, motor type: carbon, maximum chuck size: 13mm, weight: 2kg
Discontinued
Order Code:
CIB108g
Cordless Drill with hammer, 18 V, maximum torque: 60 Nm, chuck range: 13 mm, without battery
Discontinued
Order Code:
BOF137
Cordless Drill without hammer, 18 V, Li-Ion, maximum torque: 60 Nm, motor type: carbonless, chuck range: 13 mm, without battery
Discontinued
Order Code:
BOF136
Pillar Drill - Power 350W, 230V/50Hz, idle speed 500-2500/min, maximum weight 15kg, five speeds, adjusting the angle of drilling table -45° to +45°, keyless chuck diameter up to 13mm
Discontinued
Order Code:
GAR406f
Drill - 500 W, speed up to 2500 RPM, five-speed, motor type: carbon, maximum chuck size: 13mm, weight: 14,5kg
Discontinued
Order Code:
GAR406g
Hammer Drill - Power input 1010W, 2800rpm, 53200 strokes/min, 40Nm, SDS-Plus chuck, Quick chuck system, 2.7kg
Discontinued
Order Code:
BOG004e
Cordless Drill 18 V, 1,5 Ah, max. spinning moment 38 Nm
Discontinued
Order Code:
BOF128i
Drill - 710 W, with hammer, speed up to 2800 RPM, one-speed, maximum torque: 20,5 Nm, quick-action chuck, maximum chuck size: 13mm, weight: 1,6kg
Discontinued
Order Code:
BOD003p
Hammer Drill - 600 W, with hammer, speed up to 3000 RPM, one-speed, maximum torque: 35 Nm, maximum chuck size: 13mm, weight: 1,8kg
Discontinued
Order Code:
PWP099h
Hammer Drill - 950 W, with hammer, speed up to 3000 RPM, one-speed, motor type: carbon, quick-action chuck, maximum chuck size: 13mm, weight: 2,2kg
Discontinued
Order Code:
PWP099j
Hammer Drill - 720 W, with hammer, speed up to 3000 RPM, one-speed, motor type: carbon, quick-action chuck, maximum chuck size: 13mm, weight: 1,8kg
Discontinued
Order Code:
PWP099i
Cordless Drill standard, 14,4V, two-speed, max. torque 50Nm, chuck capacity: max. 13mm, weight: 1500g
Discontinued
Order Code:
BOC013t
Cordless Drill impact, 18V, Li-Ion, two-speed, max. torque 63Nm, chuck capacity: max. 13mm, weight: 1540g
Discontinued
Order Code:
BOC011u
Cordless Drill standard, 18V, Li-Ion, two-speed, max. torque 63Nm, chuck capacity: max. 13mm, weight: 1490g,
Discontinued
Order Code:
BOC011t
Cordless Drill standard, 12V, Li-Ion, one-speed, max. torque 30Nm, chuck capacity: max. 10mm, weight: 0,99g,
Discontinued
Order Code:
BOC010f2
Cordless Drill standard, 12V, Li-Ion, two-speed, max. torque 30Nm, chuck capacity: max. 10mm, weight: 1170g,
Discontinued
Order Code:
BOC010f
Cordless Drill with hammer, 18 V, Li-Ion, maximum torque: 44 Nm, motor type: carbon, chuck range: 10 mm, with carrying case
Discontinued
Order Code:
BOF104f5
Hammer Drill - Power input 1010W, idle speed 0-3000/min, 51,000/min hammering speed, quick release chuck 1.5-13mm, weight 2.9kg, set of 15 drills, side handle with depth stop, carry case
Discontinued
Order Code:
BOF003f3
Cordless Drill with hammer, 18 V, maximum torque: 32 Nm, motor type: carbonless, chuck range: 13 mm, package includes 2 × 2,5 Ah batteries, with carrying case
Discontinued
Order Code:
BOC011k2
Cordless Drill With impulse, Li-Ion, 18V, 2.5Ah, Max torque 32Nm, idle speed 0-430 / min 0-1400 / min, two speed, 13mm quick chuck, Syneon Chip: intelligently controlled power for optimum power and maximum durability With each project, plastic case
Discontinued
Order Code:
BOC011k1
Hammer Drill - 650W power, 0-1100rpm idle speed 0-3000rpm, 29Nm max. torque, chuck for 1.5.13mm loop, 1.8kg weight, two-speed gearbox, accessories, side handle with depth stop
Discontinued
Order Code:
NAR016f
Hammer Drill - power 1100W, idle speed 0-1000 rpm 2nd speed 0-2800 rpm max. torque 65Nm, chuck range 1.5-13mm, weight 2.6kg, two-speed gearbox, side grip with depth stop
Discontinued
Order Code:
NAR016b
Drill - power 760W, no load speed 0-1000rpm 0-3500rpm, maximum torque 44Nm, quick release chuck 1.5-13mm, weight 2.6kg, two-speed gearbox, side grip with depth stop, Systainer T-Loc
Discontinued
Order Code:
NAR015h