Archive - Mortise Locks
Choose an alternative in the category
Mortise Locks
35
Results
Discontinued
Order Code:
ZDnar3557
Discontinued
Order Code:
ZDnar3555
Discontinued
Order Code:
ZDnar3554
Discontinued
Order Code:
ZDnar3553
Discontinued
Order Code:
ZDnar3551
Discontinued
Order Code:
ZDnar3550
Discontinued
Order Code:
ZDnar3549
Discontinued
Order Code:
ZDnar3573
Mortise Lock - for cylindrical insert - PZ, double-sided right-left needle, with gear, two-west barrier, incl. 1 piece of securing screw, lock face: 18mm
Discontinued
Order Code:
RICH730
Mortise Lock - with latch lock and panic function "D", for crank handle/crank, panic side is adjustable in/out, with screw on locking surface, function - the latch is blocked as with lock 304.BS but can be locked, after the locking of the key lock, the outer handle is inoperative, it can not be depressed, the lock is only controllable from the inside, in the unlocked state the lock is operable on both sides, the advantage over the standard panic lock lock remains locked after the doors, the lock is still locked, with gear, split nut, package incl. counter piece, split square 8 x 8 x 50mm and 4 screws
Discontinued
Order Code:
RICH235
Mortise Lock - mortise lock, locking latch for knob/handle, function - locking bolt is blocked after the door is closed and cannot be pushed, auxiliary bolt ejects the blocking rod below the main bolt, key can release the latch but not lock it, with gear, nut with spring, pack incl. counter piece and 4 screws
Discontinued
Order Code:
RICH234