JONNESWAY
We can deliver JONNESWAY products on the same day! Most products are in stock, so you don't have to wait. Place your order from the comfort of your home and have it delivered to your address, to an AlzaBox, or to one of our stores. Why shop anywhere else but on Alza.cz?
Continue
82
Results
Car Mechanic Tools - Special brake hose clamps, Used to clamp the hoses to prevent fluid leaks
Torque Wrench - torque from 2 to 10 Nm, accuracy ± 4%, locking, 1/4" square, overall length 308 mm
Torque Wrench - torque from 4.5 to 30 Nm, accuracy ± 4%, ISO 6789 certification, seizure, 1/4" square, overall length 370 mm
Car Mechanic Tools - Brake bleeder with 1 m hose, ending in a universal, interchangeable hose connector, Brake fluid change kit with 0.75 capacity with magnet, which prevents the container from filling with liquid, universal rubber adapter, 4 adapters with dimensions 21 - 30 mm, 24 - 32 mm, 28 - 37 mm, 32 - 41 mm, working pressure 5-8 Bar (70~110 PSI), waste container capacity 1 litre, tank capacity 0.75 litres, air consumption 160 l/min, 1/4" air connections
Car Mechanic Tools - measuring tools, creating pressure and vacuum, with accessories Jonnesway AI040031, double-acting pump, which creates a vacuum of up to -0, 75bar and pressure up to +4bar, use: such as brake bleeding, checking vacuum sensors, Exhaust gas recirculation valve, throttle valve, fuel pressure regulator, pressure modulator in automatic transmissions, brake booster etc., Content: metal pump with pressure gauge in the range -1 to 4bar, flexible cable with a diameter of 6 mm, length 600 mm - 2 pcs, a set of connection terminals and plugs, set of connection clamps with cables, set of cable connectors, container with a two-necked lid - additional lid for the container, CONTROL PROCEDURE: 1. Connect the pump to the part to be inspected using a suitable spike, use the rotary head to adjust the operating range (IN - vacuum, OUT - pressure), create pressure or vacuum by pumping and monitor the pressure gauge, the pump is not used directly for suction of liquidsThe additional container is used for this purpose, which is pa
Car Battery Tester - analogue, suitable for passenger cars,
Kit - hooks and spikes for pulling out bearings, o-rings
Car Mechanic Tools - max. cutting thickness: steel 1.4 mm, speed without load: 3200 bpm, working pressure: 6,2 bar, air connection: 1/4" GW, power supply: 10 mm, average air consumption: 250 l/min, length: 210 mm, weight: 1kg
Car Mechanic Tools - Wrenches for lug nuts Jonnesway 6pcs 8x10, 10x11, 10x12, 13x14, 16x17, 17x19 mm, Contents of the set: 8x10, 10x11, 10x12, 13x14, 16x17, 17x19 mm
Car Mechanic Tools - curved, length 35 mm, for cutting even in hard-to-reach places.
Extractor Tool - Magnetic, for embedded objects, maximum range 1070 mm
Car Mechanic Tools - a tool (wrench) for removing the fuel tank nuts, range 122 - 199 mm, square for 3/8" grip, universal, for most European vehicle types, e.g. Mercedes-Benz, Audi, BMW
Car Mechanic Tools - pneumatic, spiral, ferulated, Piliurethane (PU) hose, use in tyre service and industry, dimension: 8 × 12 mm, length: 10 m
Oil Filter Wrench - belt, for oil filters with diameter 120 - 145 mm, weight 0,5 kg
Hammer - head material steel, flat striking face, shaft material rubber, rubber-coated
Car Mechanic Tools - 1/4" separator, drain valve, maximum filtration: 60 micron, protection against airborne pollutants, gun connection: 1/4" female thread, connection for quick coupling: 1/4" male thread
Inspection Mirror - extendable, Telescopic inspection mirror AG010031, with the joint, which allows it to be positioned at different angles, pocket clip, for a comfortable fit, mirror diameter 38 mm, maximum length 720 mm, load capacity 0,5 kg
Torque Wrench with 3/4" square size, working range: 60-600Nm,
Puller - McPherson spring removal jig 300 mm Jonnesway AE320044, working range is up to 300 mm, facilitates removal of the McPherson suspension spring, screw-tightened locking latch prevents accidental slipping, a solid product from a reputable manufacturer, designed for professional use
Power Sander - pneumatic, rectangular sanding pad, clamp sync paper fastening, sanding surface dimensions 407 × 63.5 mm (L×W), additional handle, weight 3.1 kg, dimensions 17 × 6.35 × 40.7 cm (H×W×D)
Chcete doručiť tovar na Slovensko? Prezrite si
Alza