Most expensive 3D Printer Filament
This page includes the most expensive 3D Printer Filament, or more specifically all products from the category 3D Printer Filament sorted from the most expensive to the cheapest. This way, the most luxurious pieces can stand out. At the moment, the most expensive product is Filament Spectrum ASA 275 1.75mm Polar White 8kg, which costs 5,999 Kč incl. VAT. Check it out, you may like it. Or you’ll get inspired.
1,374
Results
Flashforge PLA Multicolour 1,75mm 1kg Abyssal Purple
Filament - made from PLA colour changing, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 60mm/s to 350mm/s
399,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
FFfpla063
Flashforge PLA Multicolour 1,75mm 1kg Obsidian
Filament - made from PLA colour changing, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 60mm/s to 350mm/s
399,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
FFfpla062
Flashforge PLA Multicolour 1,75mm 1kg Nebula Purple
Filament - made from PLA colour changing, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 60mm/s to 350mm/s
399,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
FFfpla054
Flashforge PLA Multicolour 1,75mm 1kg Marsala
Filament - made from PLA colour changing, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 60mm/s to 350mm/s
399,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
FFfpla058
Flashforge PLA Multicolour 1,75mm 1kg Rose Quartz
Filament - made from PLA colour changing, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 60mm/s to 350mm/s
399,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
FFfpla057
Flashforge PLA Multicolour 1,75mm 1kg Skydiver
Filament - made from PLA colour changing, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 60mm/s to 350mm/s
399,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
FFfpla056
Flashforge PLA Multicolour 1,75mm 1kg Burnt Titanium
Filament - made from PLA colour changing, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 60mm/s to 350mm/s
399,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
FFfpla055
Creality Soleyin Ultra PLA 1kg Gray
Filament - made from PLA, filament diameter: 1.75mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C, recommended print speed: from 30mm/s to 300mm/s
399,-
In stock 2 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CREAU250606
Filament Spectrum Pastello PLA 1.75mm Coctail Green 1kg
Filament - made from PLA matte, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 60°C, recommended print speed: from 30mm/s to 150mm/s
399,-
In stock 2 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF610s8d
C-TECH PREMIUM LINE PETG transport filament white RAL9016
Filament - made from PETG PETG+, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 250°C, print mat temperature: 80°C, recommended print speed: from 35mm/s to 140mm/s
399,-
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF603n
Gembird Filament PLA yellow
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
399,-
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF532d8
Gembird Filament PLA, Orange
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, recommended print speed: from 40mm/s to 60mm/s
399,-
In stock 4 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF532g4
Gembird Filament PLA Celestial Blue
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
399,-
In stock 4 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF532g3
Gembird Filament PLA bright green
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
399,-
In stock 4 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF532d7
Gembird Filament PLA bright blue
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
399,-
In stock 4 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF532d5
Gembird Filament PLA red (flame bright)
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
399,-
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF532d3
Gembird Filament PLA silver
Filament - made from PLA metallic, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
399,-
In stock 3 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF532g5
Gembird Filament PLA transparent
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
399,-
In stock 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF532k2
Gembird PLA Filament Yellow
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
399,-
In stock 4 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF532n
Gembird PLA Filament green
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
399,-
In stock 2 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF532l
Gembird Filament PLA Grey
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
399,-
In stock 4 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF532k
Gembird PLA Natural Filament
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
399,-
In stock 4 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF532h
Gembird PLA Filament blue
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
399,-
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF532g
Gembird Filament PLA red
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
399,-
In stock 2 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF532d
Chcete doručiť tovar na Slovensko? Prezrite si
Filamenty do 3D tlačiarne
Für den Versand nach Deutschland, besuchen Sie bitte
3D-Drucker-Filamente
Für den Versand nach Österreich, besuchen Sie bitte
3D-Drucker-Filamente
Magyarországra rendelnél? Látogasd meg ezt a termékkategóriát
3D nyomtató filamentek