This page includes the most expensive 3D Printer Filament Spectrum, or more specifically all products from the category 3D Printer Filament Spectrum sorted from the most expensive to the cheapest. This way, the most luxurious pieces can stand out.
731
Results
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 50°C, recommended print speed: from 40mm/s to 250mm/s
419,-
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF630y
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 50°C, recommended print speed: from 40mm/s to 250mm/s
419,-
In stock 2 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF630w
Filament - made from PLA glossy, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 0,5kg, print temperature: up to 215°C, print mat temperature: 45°C, recommended print speed: from 40mm/s to 250mm/s
419,-
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF615n4
Filament - made from PLA matte, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 60°C, recommended print speed: from 30mm/s to 150mm/s
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 50°C, recommended print speed: from 40mm/s to 250mm/s
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 50°C, recommended print speed: from 40mm/s to 250mm/s
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 75°C, recommended print speed: from 30mm/s to 350mm/s
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 75°C, recommended print speed: from 30mm/s to 350mm/s
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 75°C, recommended print speed: from 30mm/s to 350mm/s
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 55°C, recommended print speed: from 40mm/s to 600mm/s
409,-
In stock 2 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF634d
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 55°C, recommended print speed: from 40mm/s to 600mm/s
409,-
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF634b
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 55°C, recommended print speed: from 40mm/s to 600mm/s
409,-
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF633z
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 55°C, recommended print speed: from 40mm/s to 600mm/s
409,-
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF633v
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 55°C, recommended print speed: from 40mm/s to 600mm/s
409,-
In stock 3 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF633u
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 75°C, recommended print speed: from 30mm/s to 350mm/s
409,-
In stock 2 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF632i
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 50°C, recommended print speed: from 40mm/s to 250mm/s
409,-
In stock 4 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF632w
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 75°C, recommended print speed: from 30mm/s to 350mm/s
409,-
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF632m
Filament - made from PLA flexible, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 0,25kg, print temperature: up to 220°C, print mat temperature: 45°C, recommended print speed: from 30mm/s to 150mm/s
409,-
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF610s3c
Filament - made from PLA flexible, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 0,25kg, print temperature: up to 220°C, print mat temperature: 45°C, recommended print speed: from 30mm/s to 150mm/s
409,-
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF610s3a
Filament - made from ASA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 0,25kg, print temperature: up to 260°C, print mat temperature: 70°C, recommended print speed: from 30mm/s to 350mm/s
Filament - made from ASA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 0,25kg, print temperature: up to 260°C, print mat temperature: 70°C, recommended print speed: from 30mm/s to 350mm/s
399,-
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF617k128
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 50°C, recommended print speed: from 40mm/s to 250mm/s
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 50°C, recommended print speed: from 40mm/s to 250mm/s
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 75°C, recommended print speed: from 30mm/s to 350mm/s
Chcete doručiť tovar na Slovensko? Prezrite si
Filamenty do 3D tlačiarne
Für den Versand nach Deutschland, besuchen Sie bitte
3D-Drucker-Filamente
Für den Versand nach Österreich, besuchen Sie bitte
3D-Drucker-Filamente
Magyarországra rendelnél? Látogasd meg ezt a termékkategóriát
3D nyomtató filamentek