Spectrum
We can deliver Spectrum products on the same day! Most products are in stock, so you don't have to wait. Place your order from the comfort of your home and have it delivered to your address, to an AlzaBox, or to one of our stores. Why shop anywhere else but on Alza.cz?
Continue
706
Results
The Filament PETG 1.75mm Technical Red 1kg
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 75°C, recommended print speed: from 30mm/s to 350mm/s
419,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF630l
The Filament ReFill PETG 1.75mm Snow White 1kg
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 75°C, recommended print speed: from 30mm/s to 350mm/s
349,-
In stock 3 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF632k
The Filament PETG 1.75mm Machinery Orange 1kg
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 75°C, recommended print speed: from 30mm/s to 350mm/s
419,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF630d
Filament Spectrum S-Flex 90A 1.75mm Polar White 0.25kg
Filament - made from TPU, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 0,25kg, print temperature: up to 230°C, print mat temperature: 70°C, recommended print speed: from 30mm/s to 70mm/s
449,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF616g5c
Filament Spectrum Pastello PLA 1.75mm Pale Salmon 1kg
Filament - made from PLA matte, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 60°C, recommended print speed: from 30mm/s to 150mm/s
599,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF610s8i
Filament Spectrum Huracan PLA 1.75mm Signal White 1kg
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 45°C, recommended print speed: from 30mm/s to 350mm/s
549,-
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF610s6l
Filament Spectrum Premium PLA 1.75mm Natural 1kg
Filament - made from PLA glossy, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 45°C, recommended print speed: from 40mm/s to 250mm/s
599,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF615e
Filament Spectrum PET-G Matt 1.75mm Bloody Red 1kg
Filament - made from PETG matte, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 80°C, recommended print speed: from 30mm/s to 120mm/s
659,-
In stock 2 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF610v
Filament Spectrum Premium PLA 1.75mm Oregano Green 1kg
Filament - made from PLA glossy, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 45°C, recommended print speed: from 40mm/s to 250mm/s
469,-
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF615f6
Filament Spectrum Premium PCTG 1.75mm Transparent Yellow 1kg
Filament - made from PCTG flexible, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 270°C, print mat temperature: 100°C, recommended print speed: from 30mm/s to 110mm/s
539,-
In stock 2 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF613a7q
Filament Spectrum Pastello PLA 1.75mm Lemon Cream 1kg
Filament - made from PLA matte, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 60°C, recommended print speed: from 30mm/s to 150mm/s
599,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF610s8h
Filament Spectrum R-PLA 1.75mm Traffic Black 1kg
Filament - made from rPLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 45°C, recommended print speed: from 30mm/s to 100mm/s
499,-
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF616f
Filament Spectrum PET-G Matt 1.75mm Brown Uniform 1kg
Filament - made from PETG matte, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 80°C, recommended print speed: from 30mm/s to 120mm/s
649,-
In stock 2 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF610w
Filament Spectrum ReFill PET-G Premium 1.75mm Olive Green 1kg
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 80°C, recommended print speed: from 30mm/s to 350mm/s
549,-
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF617k431
Filament Spectrum Nylon PA6 Low Warp GF30 1.75mm Natural 0.5kg
Filament - made from Nylon PA6, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 0,5kg, print temperature: up to 280°C, print mat temperature: 80°C, recommended print speed: from 30mm/s to 150mm/s
949,-
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF617k159
Filament Spectrum PLA Crystal 1.75mm Neon Green 1kg
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 45°C, recommended print speed: from 30mm/s to 200mm/s
499,-
In stock 3 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF611f3g
Filament Spectrum PLA Pro 1.75mm Dragon Red 1kg
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 45°C, recommended print speed: from 30mm/s to 150mm/s
719,-
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF612f
Filament Spectrum Premium PLA 1.75mm Chrysocolla Green 1kg
Filament - made from PLA glossy, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 45°C, recommended print speed: from 40mm/s to 250mm/s
599,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF614w5
Filament Spectrum Premium PLA 1.75mm Royal Blue 1kg
Filament - made from PLA glossy, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 45°C, recommended print speed: from 40mm/s to 250mm/s
599,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF615l5
Filament Spectrum PETG Premium High Speed 1.75mm BRIGHT Green 1kg
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 270°C, print mat temperature: 80°C, recommended print speed: from 30mm/s to 800mm/s
699,-
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF617k242
Filament Spectrum Premium PLA 1.75mm Baby Blue 1kg
Filament - made from PLA glossy, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 45°C, recommended print speed: from 40mm/s to 250mm/s
599,-
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF614j5
Filament Spectrum PLA Magic SILK 1.75mm Amber Leaf 0.25kg
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 0,25kg, print temperature: up to 240°C, print mat temperature: 60°C, recommended print speed: from 30mm/s to 200mm/s
299,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF617k300
The Filament ReFill PETG 1.75mm Machinery Orange 1kg
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 75°C, recommended print speed: from 30mm/s to 350mm/s
349,-
In stock 2 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF632f
The Filament ReFill PLA 1.75mm Midnight Black 1kg
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 50°C, recommended print speed: from 40mm/s to 250mm/s
399,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF633b