Archive - Drills
Electric drills are suitable for use in the workshop. They are powered directly from the mains, so there operating time is unlimited. The downside is that the power cable limits the length at which you can work from the mains supply. When choosing a power drill, it is important to know what kind of material you will be drilling.
Choose an alternative in the category
Drills
618
Results
Discontinued
Order Code:
EXTnara021
Discontinued
Order Code:
EXTnara020
Discontinued
Order Code:
EXTnara019
Discontinued
Order Code:
WSaaa3176
Pillar Drill - connection 230 V~50 Hz, motor power 550 W/P1, chuck 3 - 16 mm
Discontinued
Order Code:
GGvrt013
Pillar Drill - 230 V~50 Hz connection, motor power 250 W/P1, Chuck 1,5 - 13 mm, Pinola stroke 50 mm, spindle taper B16, solid, speed range 600 - 2,600 rpm /min.
Discontinued
Order Code:
GGvrt008
Pillar Drill - 230 V~50 Hz connection, motor power 500 W/P1, chuck 1,5 - 16 mm, Pinola stroke 50 mm, spindle taper B16, solid, speed range 500 - 2,500 rpm /min.
Discontinued
Order Code:
GGvrt011
Pillar Drill - 230 V~50 Hz connection, motor power 300 W/P1, chuck 1 - 13 mm, Pinola stroke 50 mm, spindle taper B16, solid, speed range 600 - 2,600 rpm /min.
Discontinued
Order Code:
GGvrt010
Pillar Drill - connection 230 V~50 Hz, motor power 800 W, pinhole stroke 80 mm, spindle speed 210 - 2500 rpm, spindle speed 210 - 2500 rpm. /min., speed 12, chuck 3 - 16 mm, spindle taper MK2/B16
Discontinued
Order Code:
GGvrt004
Pillar Drill - 230 V~50 Hz connection, motor power 1.100 W/P1, chuck 3 - 16 mm, Pinola stroke 150 mm, spindle cone MK2/B16, speed range 500 - 2,200 rpm /min.
Discontinued
Order Code:
GGvrt007
Pillar Drill - connection 400 V~50 Hz, engine power 1,5 kW/P1, chuck 5 - 20 mm, spindle feed 120 mm, spindle cone MK3/B22, speed range 110 - 2,880 rpm /min.
Discontinued
Order Code:
GGvrt006
Pillar Drill - connection 400 V~50 Hz, engine power 1,1 kW/P1, chuck 3 - 16 mm, spindle feed 120 mm, spindle cone MK2/B16, speed range 160 - 3.000 rpm /min.
Discontinued
Order Code:
GGvrt005
Pillar Drill - 230 V~50 Hz connection, motor power 500 W/P1, chuck 3 - 16 mm, Pinola stroke 50 mm, spindle cone MK2/B16, speed range 500 - 2,500 min-1
Discontinued
Order Code:
GGvrt003
Discontinued
Order Code:
GGvrt002
Discontinued
Order Code:
GGvrt001
Pillar Drill - 230 V~50 Hz connection, motor power 600 W/P1, Pinola stroke 50 mm, lining 120 mm, spindle cone MK2/B16, chuck 1 - 16 mm, speed 1 450 - 900 rpm /min, speed 2 1400 - 2600 rpm /min
Discontinued
Order Code:
GGvrt016
Cordless Drill with hammer, 18 V, maximum torque: 55 Nm, motor type: carbon, chuck range: 13 mm, with carrying case
Discontinued
Order Code:
METhob001
Cordless Drill 18 V, maximum torque: 55 Nm, motor type: carbon
Discontinued
Order Code:
METhob002
Cordless Drill without hammer, 20 V, maximum torque: 50 Nm, motor type: carbonless, chuck range: 13 mm, with carrying case
Discontinued
Order Code:
WSaaa2392
Cordless Drill without hammer, 20 V, maximum torque: 22 Nm, motor type: carbonless, chuck range: 10 mm
Discontinued
Order Code:
WSaaa2361
Cordless Drill 20V Li-on, speed: I. 0-400/min, II. 0-1500/min, L/P running: Yes, quick-release head: semi-metal 3/8", drill diameter: 1,5 - 10 mm, tightening torque degree: 20+ drilling, max. torque: 35/26 Nm, max. drilling into wood 30 mm, max. drilling in steel: 13 mm, two-speed gearbox, LED flashlight with range, ergonomic handle, plastic case
Discontinued
Order Code:
MADZ990
Discontinued
Order Code:
GARhob0295
Discontinued
Order Code:
GARhob0294
Cordless Drill 12 V, maximum torque: 27 Nm, chuck range: 10 mm, with carrying case
Discontinued
Order Code:
GARhob0293