Deal weeks - 3D Print
Discounts, codes, and cashbacks are limited-time promotions in which you can save a lot of money. If an item is on sale, you will see the new price right next to the old one. If a discount code applies to a product, you will find it in the category listing above the product price or in the product details below the image gallery. You must then enter the discount code in the "Use discount coupon" field before submitting your order. Items with a cashback option are also marked in the same way. If certain conditions are met after purchasing these products (e.g. registration of the goods on the manufacturer's website), you will receive part of the total price back. You can find out all the terms of the specific cashback policy in the product details.
Was this information useful?
This form is used only for evaluating the information in the description above.
If you have any question about our products, services, transport or any other request, please contact our customer support.
If you have any question about our products, services, transport or any other request, please contact our customer support.
What should be improved? Is anything missing here? Is anything wrong? Share it with us.
29
Results
to Alza branch
3D Printer - FDM, modelling space: 300mm × 300mm × 300mm, print material: 1.75mm ABS, ASA, PA, PETG, PETT and PLA, layer thickness: 0.05mm-0.3mm, printing speed of 600mm/s, touchscreen, printing from PC via USB 2,0, Via LAN, Via WiFi and USB drive
to Alza branch
3D Printer - FDM, modelling space: 350mm × 350mm × 350mm, print material: 1.75mm ABS, PETG and PLA, layer thickness: 0.05mm-0.3mm, printing speed of 600mm/s, touchscreen, printing from Via LAN, Via WiFi and USB drive
3D Printer - FDM, modelling space: 260mm × 260mm × 255mm, print material: 1.75mm PETG and TPU, layer thickness: 0.05mm-0.3mm, printing speed of 500mm/s, touchscreen, printing from Via WiFi and USB drive
Discounted -7 %
8,249,-
8,900,-
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CREAU260101
3D Printer - FDM, modelling space: 260mm × 260mm × 330mm, print material: 1.75mm ABS, ASA, PA, PC (Polycarbonate), PETG, PLA, PVA and TPU, layer thickness: 0.1mm-0.35mm, printing speed of 1000mm/s, touchscreen, printing from PC via USB 2,0
+Gift 3D Printer Accessory flsun with a value of 900,-
Discounted -14 %
9,990,-
11,690,-
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
flssr05
3D Printer - FDM, modelling space: 300mm × 300mm × 300mm, print material: 1.75mm ABS, ASA, PA, PETG, PETT and PLA, layer thickness: 0.05mm-0.3mm, printing speed of 600mm/s, touchscreen, printing from PC via USB 2,0, Via LAN, Via WiFi and USB drive
3D Printer - FDM, modelling space: 320mm × 320mm × 430mm, print material: 1.75mm ABS, ASA, PA, PC (Polycarbonate), PETG, PLA, PVA and TPU, layer thickness: 0.1mm-0.35mm, printing speed of 1200mm/s, touchscreen, printing from PC via USB 2,0
+Gift 3D Printer Accessory flsun with a value of 900,-
Alzaboxes and stores
Engraving Machine - AI controlled laser engraver, 20W diode laser, working area A4 (297 × 210 mm), engraving speed up to 36 000 mm/min, fully enclosed class 1 construction, Air Assist, USB / Wi-Fi connection
Discounted -8 %
20,490,-
22,490,-
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
TOOC251102
3D Printer - modelling space: 218mm × 123mm × 235mm, print material: UV Resin, layer thickness: 0.01mm-0.3mm, touchscreen, printing from PC via USB 2,0, Via LAN and Via WiFi
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 65°C
Discounted -18 %
259,-
319,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
ELEPD2205
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 2kg, print temperature: up to 230°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 80mm/s
Discounted -9 %
499,-
549,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CREN230319
Filament - made from PLA+, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 65°C
Discounted -5 %
379,-
399,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
ELEEG240426
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 65°C
Discounted -18 %
259,-
319,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
ELEPD2206
Filament - made from PLA silk, filament diameter: 1.75mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 100mm/s
Discounted -20 %
399,-
499,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CREFS_03
Filament - made from PLA+, filament diameter: 1.75mm, weight: 1kg, print temperature: up to 225°C, print mat temperature: 80°C, recommended print speed: from 40mm/s to 100mm/s
Discounted -6 %
399,-
429,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
ESU3D01
Filament - made from PLA silk, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 220°C, recommended print speed: from 40mm/s to 100mm/s
Discounted -8 %
309,-
339,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
landu250729
Filament - made from PLA+, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 100mm/s
Discounted -10 %
449,-
499,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
ESU240966
Filament - made from PETG matte, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 80°C, recommended print speed: from 30mm/s to 120mm/s
Discounted -15 %
659,-
780,-
In stock 3 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF610v
3D Printer Accessory - adapter for all versions of Raspberry Pi CM4 and BTT CB Series, 40pin GPIO connector, 2× Micro HDMI, 4× USB 2.0, RJ45, DSI, CSI, MicroSD etc., 5V fan connector for better heat dissipation, USB-C input voltage 5 ± 0.25 V
Discounted -24 %
219,-
289,-
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
BITR2302
Filament - made from PETG matte, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 80°C, recommended print speed: from 30mm/s to 120mm/s
Discounted -12 %
679,-
780,-
In stock 3 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF611e
Filament - made from PLA silk, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 220°C, recommended print speed: from 40mm/s to 100mm/s
Discounted -5 %
369,-
389,-
In stock 3 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
landu250737
Engraving Machine Accessories - intelligent air assist for S1 and M1 Ultra, stable air flow 30 L/min, automatic and manual power control according to working conditions, without the need for a power adapter, ensures a clean surface, higher cutting performance and laser lens protection, prolongs service life thanks to filter wool against dirt
Discounted -6 %
3,990,-
4,290,-
In stock 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
xtool250614
Paper - for card making, 12.1 × 16.8 cm, in three colours - light pink, light blue and powder blue, 12 white envelopes included, silver holographic pads, cards are equipped with adhesive
Discounted -8 %
649,-
709,-
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CRI251042
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 80°C, recommended print speed: from 30mm/s to 350mm/s
Discounted -16 %
459,-
549,-
In stock 3 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF617k427
3D Printer Accessory - Elegoo 3D Printer Accessories Printhead Mounting Plate for OrangeStorm Giga for higher productivity and printing efficiency, two versions for advanced high-extrusion printing - with two printheads (479 × 39 × 66 mm) and four printheads (678 × 39 × 66 mm), required accessories include an additional set of print heads for two nozzles and three additional sets for four nozzles, made of high quality alloy for stability and precision, Dual Carriage system with additional SA carriage for increased accuracy of X-axis movement, easy installation, allows simultaneous printing with multiple nozzles, ideal for demanding projects
Discounted -4 %
719,-
749,-
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
ELEEG250401
3D Printers
3D Printer Filament
UV Resin
Accessories
Engraving Machines
Cutting
How to 3D print efficiently
How does 3D printing work
Alza for Business
No longer sold
Deal weeks - 3D Print - articles
noveltyTahle sluchátka si nespletete. Nothing Headphone (1) dostávají nezaměnitelný design, ale i ambiciózní výbavu
Nothing Headphone (1) představují první náhlavní model této značky a už na první pohled dávají najevo, že se chtějí odlišit. Transparentní design, fyzické ovládání a výdrž až 80 hodin slibují zajímavý mix stylu a funkce. Upřímně se na tato sluchátka těšíme! Co jsme o...
Vývojářská konference WWDC 2025 započala úvodní keynote, na které Apple odhalil podobu svých nových systémů. Ať už je to iOS 26 pro telefony iPhone, macOS Tahoe 26 pro počítače nebo watchOS 26 pro hodinky Apple Watch. Sdílí spolu skleněný design Liquid Glass, ale i...
Apple M4 je procesorem nové generace. Špičkového výkonu dosahuje třeba aktuální generace tabletu iPad Pro. Na řadě jsou nyní počítače Mac, které vyššího výkonu dokážou jistě využít ještě lépe. Týden plný odhalení je tady.
recyclingKontejner na baterie aneb jak na třídění elektroodpadu
Kam vhodit papír, sklo či plast, je jasné. Pokud ale máme po ruce něco většího jako televizor, nebo třeba baterie, může už být složitější zbavit se jich. Přitom se ale stačí jen rozhlédnout kolem sebe. Vhodné místo možná není vůbec daleko.
Tiskárny a fotoaparáty často bývají nákladnější koupí, obzvláště pak pro studenty. Pokud ale máte studentský průkaz ISIC, vybrané produkty značky Canon si nyní můžete pořídit se slevou. Stačí si ji přidat na účet. Jak to udělat a na jak velkou slevu se můžete těšit?
Systém Canon MegaTank je určen pro uživatele, kteří často tisknou velké množství dokumentů, obrázků nebo fotografií a zároveň chtějí ušetřit na nákladech za inkoust. Systém MegaTank obsahuje tiskárny a multifunkční zařízení s velkoobjemovými dolévacími zásobníky na...