Deal weeks - 3D Printers
Discounts, codes, and cashbacks are limited-time promotions in which you can save a lot of money. If an item is on sale, you will see the new price right next to the old one. If a discount code applies to a product, you will find it in the category listing above the product price or in the product details below the image gallery. You must then enter the discount code in the "Use discount coupon" field before submitting your order. Items with a cashback option are also marked in the same way. If certain conditions are met after purchasing these products (e.g. registration of the goods on the manufacturer's website), you will receive part of the total price back. You can find out all the terms of the specific cashback policy in the product details.
Was this information useful?
This form is used only for evaluating the information in the description above.
If you have any question about our products, services, transport or any other request, please contact our customer support.
If you have any question about our products, services, transport or any other request, please contact our customer support.
What should be improved? Is anything missing here? Is anything wrong? Share it with us.
25
Results
to Alza branch
3D Printer - FDM, modelling space: 300mm × 300mm × 300mm, print material: 1.75mm ABS, ASA, PA, PETG, PETT and PLA, layer thickness: 0.05mm-0.3mm, printing speed of 600mm/s, touchscreen, printing from PC via USB 2,0, Via LAN, Via WiFi and USB drive
to Alza branch
3D Printer - FDM, modelling space: 350mm × 350mm × 350mm, print material: 1.75mm ABS, PETG and PLA, layer thickness: 0.05mm-0.3mm, printing speed of 600mm/s, touchscreen, printing from Via LAN, Via WiFi and USB drive
3D Printer - FDM, modelling space: 260mm × 260mm × 255mm, print material: 1.75mm PETG and TPU, layer thickness: 0.05mm-0.3mm, printing speed of 500mm/s, touchscreen, printing from Via WiFi and USB drive
Discounted -7 %
8,249,-
8,900,-
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CREAU260101
3D Printer - FDM, modelling space: 260mm × 260mm × 330mm, print material: 1.75mm ABS, ASA, PA, PC (Polycarbonate), PETG, PLA, PVA and TPU, layer thickness: 0.1mm-0.35mm, printing speed of 1000mm/s, touchscreen, printing from PC via USB 2,0
+Gift 3D Printer Accessory flsun with a value of 900,-
Discounted -14 %
9,990,-
11,690,-
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
flssr05
3D Printer - FDM, modelling space: 300mm × 300mm × 300mm, print material: 1.75mm ABS, ASA, PA, PETG, PETT and PLA, layer thickness: 0.05mm-0.3mm, printing speed of 600mm/s, touchscreen, printing from PC via USB 2,0, Via LAN, Via WiFi and USB drive
3D Printer - FDM, modelling space: 320mm × 320mm × 430mm, print material: 1.75mm ABS, ASA, PA, PC (Polycarbonate), PETG, PLA, PVA and TPU, layer thickness: 0.1mm-0.35mm, printing speed of 1200mm/s, touchscreen, printing from PC via USB 2,0
+Gift 3D Printer Accessory flsun with a value of 900,-
3D Printer - modelling space: 218mm × 123mm × 235mm, print material: UV Resin, layer thickness: 0.01mm-0.3mm, touchscreen, printing from PC via USB 2,0, Via LAN and Via WiFi
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 65°C
Discounted -18 %
259,-
319,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
ELEPD2205
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 2kg, print temperature: up to 230°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 80mm/s
Discounted -9 %
499,-
549,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CREN230319
Filament - made from PLA+, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 65°C
Discounted -5 %
379,-
399,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
ELEEG240426
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 65°C
Discounted -18 %
259,-
319,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
ELEPD2206
Filament - made from PLA silk, filament diameter: 1.75mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 100mm/s
Discounted -20 %
399,-
499,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CREFS_03
Filament - made from PLA+, filament diameter: 1.75mm, weight: 1kg, print temperature: up to 225°C, print mat temperature: 80°C, recommended print speed: from 40mm/s to 100mm/s
Discounted -6 %
399,-
429,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
ESU3D01
Filament - made from PLA silk, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 220°C, recommended print speed: from 40mm/s to 100mm/s
Discounted -8 %
309,-
339,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
landu250729
Filament - made from PLA+, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 100mm/s
Discounted -10 %
449,-
499,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
ESU240966
Filament - made from PETG matte, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 80°C, recommended print speed: from 30mm/s to 120mm/s
Discounted -15 %
659,-
780,-
In stock 3 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF610v
3D Printer Accessory - adapter for all versions of Raspberry Pi CM4 and BTT CB Series, 40pin GPIO connector, 2× Micro HDMI, 4× USB 2.0, RJ45, DSI, CSI, MicroSD etc., 5V fan connector for better heat dissipation, USB-C input voltage 5 ± 0.25 V
Discounted -24 %
219,-
289,-
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
BITR2302
Filament - made from PETG matte, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 80°C, recommended print speed: from 30mm/s to 120mm/s
Discounted -12 %
679,-
780,-
In stock 3 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF611e
Filament - made from PLA silk, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 220°C, recommended print speed: from 40mm/s to 100mm/s
Discounted -5 %
369,-
389,-
In stock 3 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
landu250737
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 80°C, recommended print speed: from 30mm/s to 350mm/s
Discounted -16 %
459,-
549,-
In stock 3 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF617k427
3D Printer Accessory - Elegoo 3D Printer Accessories Printhead Mounting Plate for OrangeStorm Giga for higher productivity and printing efficiency, two versions for advanced high-extrusion printing - with two printheads (479 × 39 × 66 mm) and four printheads (678 × 39 × 66 mm), required accessories include an additional set of print heads for two nozzles and three additional sets for four nozzles, made of high quality alloy for stability and precision, Dual Carriage system with additional SA carriage for increased accuracy of X-axis movement, easy installation, allows simultaneous printing with multiple nozzles, ideal for demanding projects
Discounted -4 %
719,-
749,-
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
ELEEG250401
3D Printer Accessory - cover for the front of the Jetpack V2 extruder, made of MJF nylon, cooling system with Corner-Outlet technology, allows a constant view of the nozzle and the print object
Discounted -25 %
1,190,-
1,590,-
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
BUN_260110
3D Printer Accessory - cover for the front of the Jetpack V2 extruder, made of MJF nylon, cooling system with Corner-Outlet technology, allows a constant view of the nozzle and the print object
Discounted -25 %
1,190,-
1,590,-
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
BUN_260108
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 270°C, print mat temperature: 80°C, recommended print speed: from 30mm/s to 800mm/s
Deal weeks - 3D Printers - articles
CanonObjevte systém MegaTank
Systém Canon MegaTank je určen pro uživatele, kteří často tisknou velké množství dokumentů, obrázků nebo fotografií a zároveň chtějí ušetřit na nákladech za inkoust. Systém MegaTank obsahuje tiskárny a multifunkční zařízení s velkoobjemovými dolévacími zásobníky na...
Tolerance průměru filamentu by měla být co nejmenší. Jedině tak zajistíte bezproblémový 3D tisk.
Průměr struny, resp. tzv. filamentu, materiálu z něhož 3D tiskárna vytváří výrobek, ovlivňuje 3D tiskárna, kterou používáte.
3d PrinterCreality ENDER 3 (V2): proč je to nejlepší 3D tiskárna pro úplné začátečníky?
Obě generace 3D tiskárny Creality ENDER 3 jsou to nejlepší, co si může začínající tiskař pořídit. Nízkou cenou to začíná, ale rozhodně nekončí. Zcela zásadní jsou i další vlastnosti a parametry, kterými nepohrdnou ani pokročilejší uživatelé. Proč jsou tyto tiskárny tak...
3D tiskárny mají své místo v každé domácnosti! Už nemusíte být IT guru, designový mág, studovaný výtvarník a přes to, můžete realizovat každý svůj tvořivý sen! Je tady nová dimenze tvorby! Nastává doba kutilská, výtvarná a modelářská!
Hardly any 3D printer is able to print from all materials. Some are more universal, for others the choice of filaments is limited. To give you a better idea of the compatibility, we have prepared a clearly structured table with all the information.
Deal weeks - 3D Printers - additional info
3D printers are a special type of printer that are used for spatial printing to create three-dimensional objects from special materials. 3D printers are mainly used in industries which deal in the production of plastic elements or the production of spare parts for various purposes. Also available are non-commercial printers for the home.
Was this information useful?
This form is used only for evaluating the information in the description above.
If you have any question about our products, services, transport or any other request, please contact our customer support.
If you have any question about our products, services, transport or any other request, please contact our customer support.
What should be improved? Is anything missing here? Is anything wrong? Share it with us.