Pneumatic Tools
Pneumatic Tools – same-day delivery available. Just make sure the product you want is in stock. Choose products to buy from the comfort of your home and have them delivered to your address, to an AlzaBox, or to one of our stores. Learn more about why shop on Alza.cz.
Continue
43
Results
Car Mechanic Tools - for Bosch injectors, Delphi, Denso, Siemens, includes extractor and various adapters, compatible with a wide range of injectors on the market
Demolition Hammer - with pneumatic hammering, 4500 impact rate per minute, weight 1,2 kg
Car Mechanic Tools - curved, length 35 mm, for cutting even in hard-to-reach places.
Car Mechanic Tools - metal construction, transparent manometer with dual scale MPa and psi, wall or compressor mounting, working pressure range 0 - 150 psi, 1/2" air connection, set includes pressure regulator with lock, mixer producing oil mist with intensity control, dishes, water drain valve, dual scale manometer (MPa-psi) and mounting bracket
Car Mechanic Tools - Extremely high power of the pneumatic chisel for unscrewing corroded or seized joints, the impact required to loosen wheel bearings, bushings, tapered joints (e.g. pins), corroded and seized bolts, good for lubricant distribution and tensioner bearing removal, rust and paint removal, fastening of the chisels by means of a quick coupling, 1/4" connection, 19 needles, 4500 beats/min, 350 mm, stroke length 43 mm, 1.97 kg, working pressure 6,3 bar
Car Mechanic Tools - max. cutting thickness: steel 1.4 mm, speed without load: 3200 bpm, working pressure: 6,2 bar, air connection: 1/4" GW, power supply: 10 mm, average air consumption: 250 l/min, length: 210 mm, weight: 1kg
Random Orbital Sander - pneumatic, up to 10000 RPM, disc diameter 150 mm, without suction, weight 1.8 kg
Car Mechanic Tools - pneumatic, spiral, ferulated, Piliurethane (PU) hose, use in tyre service and industry, dimension: 8 × 12 mm, length: 10 m
Power Sander - pneumatic, rectangular sanding pad, clamp sync paper fastening, sanding surface dimensions 407 × 63.5 mm (L×W), additional handle, weight 3.1 kg, dimensions 17 × 6.35 × 40.7 cm (H×W×D)
Car Mechanic Tools - Set of 22 adapters and pneumatic press for removing VW brake pistons, Damage, BMW, Ford, Honda, Jaguar, Mercedes-Benz i, Supported cars: Opel, Citroen XM, Xantia u. a., Alfa Romeo, Audi, Austin, BMW, Ford, Honda, Jaguar, Mercedes-Benz, Mitsubishi, Nissan, Rover, toyota, VW, Mazda, Saab 9000, Subaru, Nissan Primera, VW -Golf IV, Audi 80.90, V8 + 100, Ford Sierra ABS + Scorpio ab 85, Honda Prelude, Nissan Silvia 1.8 turbo, Rover 8000, Subaru L+Z, VW-Golf + Passat, GM Motors, Saab, Renault, Maxima, opel, Citroen C5
Car Mechanic Tools - pneumatic carving machine for carving glued car windows, three blades of size 30 mm, 35 mm and 57 mm, in a plastic case, compressed air drive, speed 22000 beats. /min, working pressure 6.2 bar, ¼" air connection, 10 mm supply hose, air consumption 260 l/min, length 120 mm, weight 1,2 kg
Car Mechanic Tools - pneumatic, spiral, ferulated, Piliurethane (PU) hose, use in tyre service and industry, dimension: 8 × 12 mm, length: 15m
Car Mechanic Tools - professional, with speed control (right-left)
Car Mechanic Tools - drill - angular, max. diameter of the drill bit: 10 mm, direction of rotation: left/right, idle speed: 1 800 rpm. /min, working pressure: 6,2 bar, air connection: 1/4" GW, power cord: 10 mm, air outlet: rear, average air consumption: 113 l/min, length: 210 mm, weight: 1.82 kg, Noise level: 86.1 dBA
Car Mechanic Tools - 3,2-6,4mm, maximum rivet size: 6.4 mm (for steel rivets), 4.8 mm (for stainless steel rivets), crushing force: 1200 kgf (kG), stroke: 14 mm, working pressure: 6,2 bar, air connection: 1/4" GW, power supply: 10 mm, average air consumption: 1,8 l/cycle, weight: 1,94 kg
Random Orbital Sander - pneumatic, up to 12000 RPM, disc diameter 150 mm, speed control, built-in suction, dimensions 11 × 15 × 23 cm (H×W×D), weight 0.84 kg, service key included
Angle Grinder - disc diameter 75 mm, max. speed 20000 rev/min, speed control, dimensions 10 × 21.2 × 9.3 cm (W×H×D), weight 0.64 kg, service key included
Impact Wrench pneumatic, mounting type: impact joint 1", 4000 rev/min, working pressure of the tool is 8 bar, 2450 Nm torque
In the category Pneumatic Tools on Alza.cz, we currently have a total of 43 products, which you can easily buy online and get quickly delivered. See all of your purchases and make orders on our easy-to-use app.
Chcete doručiť tovar na Slovensko? Prezrite si
Pneumatické náradie
Magyarországra rendelnél? Látogasd meg ezt a termékkategóriát
Pneumatikus szerszámok