Cheap record Player Accessories

Gramophone Accessory - in an elegant silver case, the set includes an anti-static brush for phonograph records, digital scale for measuring the pressure of the transmission tip, a template for easy adjustment of the transmission azimuth and vertical angle of the VTA, template for setting up the transmission, small level - 4 pcs, the transmission installation tweezers for the headshell, spare transmission connection cables - 4 pcs, screws for the transmissions, screwdriver, brush for cleaning the tip of the transmission, a big level, centre adapter for playing singles at 45 rpm /min

Preamplifier - phono pre-amp, suitable for Pro-Ject turntables

LP Box - for up to 330 records, material: wood, dimensions: 356 x 956 x 342mm

Preamplifier

Preamplifier Phono preamplifier for MM and MC cartridges, with precise RIAA correction for clear, dynamic and natural vinyl sound; offers four gain levels to optimize sensitivity according to the type of transmission; low noise and distortion, faithful reproduction of bass, midrange and fine treble; RCA inputs and outputs for easy connection to amplifiers, active speakers or HiFi systems; solid metal chassis for stable and interference-resistant operation, ideal for turntables without built-in phono input.

Turntable Cartridge - spherical tip, frequencies from 20 Hz to 20000 Hz, pressure 3 g, weight 18,5 g, output voltage 6 mV, suitable for DJ turntable

Preamplifier - designed for MM transmissions (with moving magnet), switching power supply delivers fast response, high accuracy and reduced noise, high noise-to-signal ratio is also ensured by the surface mount technology of the components on the PCB, subsonic filter helps eliminate low frequency interference caused by imperfections in your turntable, economical, with a standby power consumption of less than 0.5 watts and an automatic shutdown function, which switches the device off after 20 minutes of inactivity

Preamplifier - phono preamplifier for turntables, intelligent subsonic filter, support for MM and MC cartridges, gain from 36 to 72 dB in four stages, independent load impedance adjustment, RIAA equalisation with a tolerance of ±0.15 dB, signal-to-noise ratio down to -151 dBV, crosstalk between channels over 75 dB, balanced and unbalanced outputs, frequency response 20 Hz to 80 kHz, isolated power supply, DC 5V/0.5A power supply, power consumption 1.5 to 1.8 W, dimensions 158 × 115 × 35 mm (L×W×H), weight 456 g, suitable for vinyl enthusiasts and audiophiles

Preamplifier - can be connected to any turntable, because it works with both moving magnet (MM) transmissions, with a moving coil (MC), is equipped with a headphone amplifier and volume control, state-of-the-art switching power supply delivers fast response, high accuracy and reduced noise, high noise-to-signal ratio is also ensured by the surface mount technology of the components on the PCB

HiFi Amplifier - 2.0, with output of 40 W/channel, minimum impedance of 4 Ohm, 2 × speaker output, 1 × output for active subwoofer, 3 × RCA/Cinch input, 2 × optical input, 1 × turntable input, 1 × coaxial audio input, 1 × headphone output, remote control

Vinyl Record Cleaner - removes dirt with ultrasound, offers 3 cleaning modes, features an air filter and removable water filter, has a storage compartment for storing the power adapter and cable, can also be used on 7" and 10" phono records when using the adapter

Vinyl Record Cleaner - removes impurities using ultrasound, boasts compact dimensions and low weight, offers 3 cleaning modes, at 7, 10 and 12" phonograph records, water drainage function and a cover that also serves as a plate dryer, includes a replaceable power adapter, water tank and other accessories