Cheap underbody Sprays
On this page you will find underbody Sprays at the lowest prices, more so all underbody Sprays ranked from the lowest to the highest price. It will be easier to see products that are now marked at their lowest price. The item with the lowest price in this category is Den Braven Undercarriage Protection Rubber 400ml TECT. marked at 179 Kč incl. VAT. Is this what you’re looking for?
41
Results
Chassis Spray - wax-based, sulfonate and oil, excellent penetration capabilities, long-term protection against corrosion, creates a brown, greasy, moisture-repellent film, suitable for cavity protection, flanges and vehicle joints, compatible with conventional corrosion protection systems, approved according to SS 18 65 11, contains a proportion of renewable raw materials, can be used as a primer in combination with Mercasol 3 and Mercasol 3AL, application at +15 to +25 °C, drying time approx. 8 hours at +23 °C (50 % RH), VOC 430 g/l, cleaning with aliphatic diesel or Mercasol cleaner
Chassis Spray - solvent base aliphatic diesel, wax and sulfonate, clear design, creates a dry and non-sticky protective film, long-term protection against corrosion, suitable for visible vehicle surfaces, tools and equipment, can be used in flanges and joints, application at +15 to +25 °C, recommended dry layer thickness approx. 10 μm, wet layer of about 50 μm, VOC 664 g/l
Chassis Spray chemically active corrosion protection, based on mineral oil, wax, corrosion inhibitor and solvents, good penetration ability
Chassis Spray - active corrosion protection and primer for metal surfaces, resistant to temperatures up to 80°C, short-term up to 140°C, easy grinding, low solvent content, can be repainted in approximately 10-15 minutes
Chassis Spray abrasion and corrosion protection, based on asphalt, wax, and solvents, sound dampening
Chassis Spray solvent-based, alkyd paint and rubber, protection against bouncing stones, suitable for sills and edges of car bodies, sound dampening
Chassis Spray - wax-based, solvent-based, non-repaintable, water-repellent, anti-corrosive wax with very good penetration properties and self-healing effect, resistant to temperatures up to approximately 180 °C
649,-
In stock 1 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
AUPR122037
Chassis Spray corrosion protection, water-based, suitable for hollow engine compartments, fast drying
Chassis Spray - solvent base aliphatic diesel, wax and sulfonate, clear design, creates a dry and non-sticky protective film, long-term protection against corrosion, suitable for visible vehicle surfaces, tools and equipment, can be used in flanges and joints, application at +15 to +25 °C, recommended dry layer thickness approx. 10 μm, wet layer of about 50 μm, VOC 664 g/l
Chassis Spray Anti-corrosion, reinforced bitumen paste, abrasion, corrosion and sound dampening protection, suitable for mechanical and chemical protection
Chassis Spray - wax-based, solvent-based, non-repaintable, water-repellent, anti-corrosive wax with very good penetration properties and self-healing effect, resistant to temperatures up to approximately 180 °C
Chassis Spray - thixotropic consistency, forms a light brown elastic waxy film, long-term protection against corrosion, provides partial mechanical protection, suitable for machines, machine parts, beams and metal structures during storage, application by high or low pressure spraying, by dipping or brushing, possibility of dilution with a small amount of non-aromatic white spirit, degreasing during film removal with Renox Milieu
Chassis Spray - without solvents, 3-4 times higher penetration capacity compared to conventional products, excellent bonding to joints and cavities, application at room temperature, forms a soft waxy, highly hydrophobic protective film, designed for treatment of vehicle cavities using the ML method, suitable for protection during transport and storage of machinery, machine parts and beams, VOC 13,9 g/l
Chassis Spray - for corrosion protection, non-hardening, for bare or primed aluminium and steel inner body panels and welded car components, volume 500 ml
Chassis Spray - chemical drying without solvent evaporation, start of drying after approximately 24 hours, complete curing in 3-7 days depending on temperature and layer thickness, high efficiency when applied in thin layers, designed to protect the undercarriage of vehicles, machines, machine components and steel structures, provides protection during transport and outdoor storage, resistant to sprinkling salts, water-repellent and moisture-repellent film, VOC 0 g/l, application on a dry and clean surface, possibility of application by airless high pressure pump, with a spray gun or brush, more layers recommended for higher demands
Chassis Spray - provides excellent corrosion protection and adheres well even on thin sheet metal edges, volume 0.4 l
Chassis Spray - anticorrosive and welding primer, provides extremely hard surface, permanent heat resistance up to 300 °C, dries after 5-8 min. Dry to the touch after about 1 hour
999,-
In stock 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
AUPR122034
Cheap underbody Sprays
Chcete doručiť tovar na Slovensko? Prezrite si
Ochrana podvozku
Magyarországra rendelnél? Látogasd meg ezt a termékkategóriát
Alvázvédő spray-k