Würth Promax corrosion protection grey, 400 ml
Würth Promax corrosion protection grey, 400 ml
Anticorrosive and welding primer with TITANID.
Key features of Würth Promax corrosion protection grey, 400 ml
- Complies with the repair requirements of DIN EN ISO 1461
- The newly developed TITANID ensures an extremely hard surface
- Optimum protection and maximum safety with layer thicknesses from 10-20 μm
- Excellent for welding
- Permanent heat resistance up to 300 °C
- Active long-term corrosion protection with preventive cathodic protection effect
- Can be used as a primer
- Suitable as a welding primer for spot welding, inert atmosphere welding and autogenous welding
- Perfect for "cosmetic changes" on zinc components
Purpose of use
Extremely hard coating with zinc microflakes with excellent anti-corrosion properties. Promax contains an anti-corrosive agent that provides optimal protection against rusting on parts with minor mechanical damage (cracks, abrasions). Thanks to TITANID's unique formulation, the coating remains sealed and weather-resistant for a long time and prevents the formation of white rust. For coating weld seams, cutting edges and repair points on bare and galvanized steel and sheet steel.
Manual
Shake the can thoroughly for at least 2 minutes before using. The surface must be clean, dry and free of grease. Spray distance: 15-25 cm. Apply PROMAX in a thin layer in 1-2 passes.
Notice
Dries after 5-8 min. Dry to the touch after about 1 hour. After use, turn the container upside down and press the valve until the nozzle is empty. The shadows on the surface are product specific and provide a zinc finish. The technical data and specifications of the manufacturer of the covering coating must be observed during application and coating.
Würth, spol. s r.o., č.p. 137. Nepřevázka 293 01, +420 323 041 141, [email protected]
Specifications can be changed without notice. Images are for illustrative purposes only.
