Alza Days - Angle Grinder Accessories
Save with discount codes
- The offer is valid from June 1, 2026, until June 22, 2026. Full terms and conditions of the campaign can be found here.
Was this information useful?
This form is used only for evaluating the information in the description above.
If you have any question about our products, services, transport or any other request, please contact our customer support.
If you have any question about our products, services, transport or any other request, please contact our customer support.
What should be improved? Is anything missing here? Is anything wrong? Share it with us.
188
Results
Buy with code
ALZADNY10
The discount code gives the option of applying a discount on a given product when entering the code in the shopping cart.
Získejte slevu 10 % s kódem ALZADNY10. Klikněte a kód se uplatní automaticky.
228,-
253,-
In stock > 10 pcs at the supplier's
Order Code:
BOCh6068
Diamond Disc - cutting, suitable for stone and tiles, classic, diameter 180 mm, installation hole 25.4 mm, thickness 2.2 mm, maximum speed 8500 rev/min
Buy with code
ALZADNY10
The discount code gives the option of applying a discount on a given product when entering the code in the shopping cart.
Získejte slevu 10 % s kódem ALZADNY10. Klikněte a kód se uplatní automaticky.
1,545,-
1,717,-
In stock > 5 pcs at the supplier's
Order Code:
BOCh5695
Diamond Disc - cutting, suitable for concrete, stone, masonry and granite, segmented, diameter 300 mm, installation hole 25.4 mm, thickness 3.1 mm, maximum speed 6400 rev/min
Buy with code
ALZADNY10
The discount code gives the option of applying a discount on a given product when entering the code in the shopping cart.
Získejte slevu 10 % s kódem ALZADNY10. Klikněte a kód se uplatní automaticky.
2,371,-
2,634,-
In stock > 5 pcs at the supplier's
Order Code:
BOCh5678
Diamond Disc - cutting, suitable for concrete, segmented, diameter 150 mm, installation hole 22.23 mm, thickness 2.4 mm, maximum speed 10200 rev/min, X-Lock mounting
Buy with code
ALZADNY10
The discount code gives the option of applying a discount on a given product when entering the code in the shopping cart.
Získejte slevu 10 % s kódem ALZADNY10. Klikněte a kód se uplatní automaticky.
2,134,-
2,372,-
In stock 5 pcs at the supplier's
Order Code:
BOCh5712
Replacement Disc A fibreglass plate serves as a base for the cleaning disc. The N377 Best for Metal Cleaning Wheel achieves fast results on metal surfaces and building materials. It incorporates a 3D open-structured fleece and enables high material removal rates without clogging the disc. The 3D fleece is also coated with carborundum, which restores its entire structure and creates sharp cutting edges: these allow for efficient and consistent material removal. The wheel is designed to cut, remove paint and oxide layers from metal as well as lime deposits, moss and graffiti from stone, marble and concrete.
Buy with code
ALZADNY10
The discount code gives the option of applying a discount on a given product when entering the code in the shopping cart.
Získejte slevu 10 % s kódem ALZADNY10. Klikněte a kód se uplatní automaticky.
326,-
362,-
In stock > 5 pcs at the supplier's
Order Code:
BOCh5953
Diamond Disc - cutting, suitable for stone, segmented, diameter 230 mm, installation hole 22.23 mm, thickness 2.4 mm, maximum speed 6500 rev/min, X-Lock mounting
Buy with code
ALZADNY10
The discount code gives the option of applying a discount on a given product when entering the code in the shopping cart.
Získejte slevu 10 % s kódem ALZADNY10. Klikněte a kód se uplatní automaticky.
3,319,-
3,688,-
In stock > 5 pcs at the supplier's
Order Code:
BOCh5705
Backing Pad - for angle grinders, standard, diameter 125 mm, flange thread M14, max. 12,250 rpm. /min
Buy with code
ALZADNY10
The discount code gives the option of applying a discount on a given product when entering the code in the shopping cart.
Získejte slevu 10 % s kódem ALZADNY10. Klikněte a kód se uplatní automaticky.
338,-
375,-
In stock > 10 pcs at the supplier's
Order Code:
BOCh5330
Diamond Disc - cutting, suitable for concrete, metal, marble and tiles, segmented, diameter 125 mm, installation hole 22.23 mm, thickness 2 mm, maximum speed 12250 rev/min, X-Lock mounting, 10 pc(s) discs in the pack
Buy with code
ALZADNY10
The discount code gives the option of applying a discount on a given product when entering the code in the shopping cart.
Získejte slevu 10 % s kódem ALZADNY10. Klikněte a kód se uplatní automaticky.
3,319,-
3,688,-
In stock > 5 pcs at the supplier's
Order Code:
BOCh3727
Buy with code
ALZADNY10
The discount code gives the option of applying a discount on a given product when entering the code in the shopping cart.
Získejte slevu 10 % s kódem ALZADNY10. Klikněte a kód se uplatní automaticky.
571,-
634,-
In stock > 5 pcs at the supplier's
Order Code:
BOCh6079
Backing Pad - for angle grinders, Velcro fastening system, undivided, diameter 125 mm, flange thread M14, max. 12,250 rpm. /min
Buy with code
ALZADNY10
The discount code gives the option of applying a discount on a given product when entering the code in the shopping cart.
Získejte slevu 10 % s kódem ALZADNY10. Klikněte a kód se uplatní automaticky.
596,-
662,-
In stock > 5 pcs at the supplier's
Order Code:
BOCh5317
Grinding Wheel - diameter: 150mm, suitable for metal and steel
Buy with code
ALZADNY10
The discount code gives the option of applying a discount on a given product when entering the code in the shopping cart.
Získejte slevu 10 % s kódem ALZADNY10. Klikněte a kód se uplatní automaticky.
501,-
557,-
In stock > 10 pcs at the supplier's
Order Code:
BOCh3423
Diamond Disc - cutting, suitable for concrete, stone, masonry and granite, segmented, diameter 350 mm, installation hole 25.4 mm, thickness 3.1 mm, maximum speed 5500 rev/min
Buy with code
ALZADNY10
The discount code gives the option of applying a discount on a given product when entering the code in the shopping cart.
Získejte slevu 10 % s kódem ALZADNY10. Klikněte a kód se uplatní automaticky.
2,608,-
2,898,-
In stock > 5 pcs at the supplier's
Order Code:
BOCh5679
Sanding Brush The Clean for Metal wire brush provides a very fine surface finish. The Cup Wire Brush features a crimped wire with a brass finish for less and medium-duty cleaning. It is suitable for removing coatings, rust and paint from medium and large ferrous and non-ferrous surfaces. This disc wire brush is also suitable for roughening, matting and cleaning of formwork boards and tiles. Brass-coated wires protect the brush against corrosion. Different brush wire thicknesses are available for different levels of abrasion. Thicker wires are more aggressive and produce a rougher surface but progress faster, while thinner wires produce a finer and smoother surface. Designed for use in angle grinders.
Buy with code
ALZADNY10
The discount code gives the option of applying a discount on a given product when entering the code in the shopping cart.
Získejte slevu 10 % s kódem ALZADNY10. Klikněte a kód se uplatní automaticky.
366,-
407,-
In stock > 10 pcs at the supplier's
Order Code:
BOCh5923
Diamond Disc - cutting, suitable for ceramics, porcelain and tiles, classic, diameter 200 mm, installation hole 25.4 mm, thickness 2.2 mm, maximum speed 7650 rev/min
Buy with code
ALZADNY10
The discount code gives the option of applying a discount on a given product when entering the code in the shopping cart.
Získejte slevu 10 % s kódem ALZADNY10. Klikněte a kód se uplatní automaticky.
1,803,-
2,004,-
In stock > 5 pcs at the supplier's
Order Code:
BOCh5696
Backing Pad - for Bosch PEX 270 A and PEX 270 AE eccentric grinders, medium hard, diameter 125 mm, 8 holes, screws included, hexagon wrench and Allen wrench
Buy with code
ALZADNY10
The discount code gives the option of applying a discount on a given product when entering the code in the shopping cart.
Získejte slevu 10 % s kódem ALZADNY10. Klikněte a kód se uplatní automaticky.
497,-
552,-
In stock > 5 pcs at the supplier's
Order Code:
BOCh5892
Grinding Wheel - diameter: 200mm, suitable for metal and steel
Buy with code
ALZADNY10
The discount code gives the option of applying a discount on a given product when entering the code in the shopping cart.
Získejte slevu 10 % s kódem ALZADNY10. Klikněte a kód se uplatní automaticky.
917,-
1,019,-
In stock > 5 pcs at the supplier's
Order Code:
BOCh3428
Buy with code
ALZADNY10
The discount code gives the option of applying a discount on a given product when entering the code in the shopping cart.
Získejte slevu 10 % s kódem ALZADNY10. Klikněte a kód se uplatní automaticky.
405,-
450,-
In stock > 10 pcs at the supplier's
Order Code:
BOCh6066
Backing Pad - for angle grinders, soft, diameter 115 mm, flange thread M14, max. 13,300 rpm. /min
Buy with code
ALZADNY10
The discount code gives the option of applying a discount on a given product when entering the code in the shopping cart.
Získejte slevu 10 % s kódem ALZADNY10. Klikněte a kód se uplatní automaticky.
317,-
352,-
In stock > 5 pcs at the supplier's
Order Code:
BOCh5314
Diamond Disc - cutting, suitable for concrete, stone and tiles, segmented, diameter 400 mm, installation hole 25.4 mm, thickness 3.2 mm, maximum speed 4800 rev/min, X-Lock mounting
Buy with code
ALZADNY10
The discount code gives the option of applying a discount on a given product when entering the code in the shopping cart.
Získejte slevu 10 % s kódem ALZADNY10. Klikněte a kód se uplatní automaticky.
4,030,-
4,478,-
In stock > 5 pcs at the supplier's
Order Code:
BOCh3738
Diamond Disc - cutting, suitable for stone, ceramics, marble and tiles, classic, diameter 350 mm, installation hole 30 mm, thickness 3 mm, maximum speed 5500 rev/min
Buy with code
ALZADNY10
The discount code gives the option of applying a discount on a given product when entering the code in the shopping cart.
Získejte slevu 10 % s kódem ALZADNY10. Klikněte a kód se uplatní automaticky.
6,376,-
7,085,-
In stock 1 pcs at the supplier's
Order Code:
BOCh5700
Diamond Disc - cutting, suitable for ceramics, marble and tiles, classic, diameter 350 mm, installation hole 30 mm, thickness 2 mm, maximum speed 6150 rev/min
Buy with code
ALZADNY10
The discount code gives the option of applying a discount on a given product when entering the code in the shopping cart.
Získejte slevu 10 % s kódem ALZADNY10. Klikněte a kód se uplatní automaticky.
2,531,-
2,812,-
In stock > 5 pcs at the supplier's
Order Code:
BOCh5670
Diamond Disc - cutting, suitable for concrete, stone, marble and tiles, segmented, diameter 300 mm, installation hole 22.23 mm, thickness 3.3 mm, maximum speed 5100 rev/min, X-Lock mounting
Buy with code
ALZADNY10
The discount code gives the option of applying a discount on a given product when entering the code in the shopping cart.
Získejte slevu 10 % s kódem ALZADNY10. Klikněte a kód se uplatní automaticky.
2,516,-
2,795,-
In stock > 5 pcs at the supplier's
Order Code:
BOCh3732
Diamond Disc - cutting, suitable for concrete, stone and masonry, segmented, diameter 230 mm, installation hole 22.23 mm, thickness 2.6 mm, maximum speed 6650 rev/min, X-Lock mounting
Buy with code
ALZADNY10
The discount code gives the option of applying a discount on a given product when entering the code in the shopping cart.
Získejte slevu 10 % s kódem ALZADNY10. Klikněte a kód se uplatní automaticky.
3,789,-
4,210,-
In stock > 5 pcs at the supplier's
Order Code:
BOCh3720
Diamond Disc - cutting, suitable for concrete, stone and masonry, segmented, diameter 125 mm, installation hole 22.23 mm, thickness 2 mm, maximum speed 12250 rev/min
Buy with code
ALZADNY10
The discount code gives the option of applying a discount on a given product when entering the code in the shopping cart.
Získejte slevu 10 % s kódem ALZADNY10. Klikněte a kód se uplatní automaticky.
1,855,-
2,061,-
In stock > 5 pcs at the supplier's
Order Code:
BOCh3718