Welding inverter SHARKS 250-Y10 MIG/MMA IGBT

Welding Machine - voltage/frequency: 230V/50Hz Range of welding current MIG 20-180A; MMA 20-160A, diameter of steel wire 0.6 to 1.0mm, diameter of electrodes 2.0 - 4.0mm (rutile, basic) rated welding current MIG 175A; MMA 155A, nominal input capacity of 8.5KVA, dimensions 680 x 300 x 385mm accessories: welding cable with earth clamp, welding torch cable with 15MB/3m welding cable with electrode holder, welding shield, brush/hammer, pressure reducing valve with preheating, 2x sleeve, 2 nozzles, nozzle
Code:  AUPR2246

Don't like the alternatives? Choose from the full product list

Welding inverter SHARKS 250-Y10 MIG/MMA IGBT

This small modern welder, the Sharks 250-Y10 MIG/MMA IGBT is uniquely mobile and uses only 230V power. Therefore it can be used for maintenance in a home or professional workshop. The welder is designed for MIG or MMA welding at the same single-phase voltage. This is made possible by a special function to compensate for the supply voltage.

The maximum power is 180A. It is used for welding steel, stainless steel and aluminium using the MIG method. It has a clear display, so you have all the settings under control.

In the pack you will find welding cables for both types of welding, a welding mask and a hammer/brush for cleaning.

The modern Sharks MIG 190 inverter welder is designed for CO2-CO2 / Argon-based welding. It has a built-in temperature switch that protects the device from overloading. This model employs a forced air circulation cooling system, equipped for 160 A of maximum power with continuously adjustable wire feed. The movement is facilitated by four wheels, a welding torch with a hose, a mask, a brush and a hammer. - See more at: http://www.kamody.cz/sharks-mig-190-svarecka-pro-svarovani-v-ochranne-atmosfere-shk449-174340#sthash.9nxZ22Fj.dpuf
The modern Sharks MIG 190 inverter welder is designed for CO2-CO2 / Argon-based welding. It has a built-in temperature switch that protects the device from overloading. This model employs a forced air circulation cooling system, equipped for 160 A of maximum power with continuously adjustable wire feed. The movement is facilitated by four wheels, a welding torch with a hose, a mask, a brush and a hammer. - See more at: http://www.kamody.cz/sharks-mig-190-svarecka-pro-svarovani-v-ochranne-atmosfere-shk449-174340#sthash.9nxZ22Fj.dpuf
The modern Sharks MIG 190 inverter welder is designed for CO2-CO2 / Argon-based welding. It has a built-in temperature switch that protects the device from overloading. This model employs a forced air circulation cooling system, equipped for 160 A of maximum power with continuously adjustable wire feed. The movement is facilitated by four wheels, a welding torch with a hose, a mask, a brush and a hammer. - See more at: http://www.kamody.cz/sharks-mig-190-svarecka-pro-svarovani-v-ochranne-atmosfere-shk449-174340#sthash.9nxZ22Fj.dpuf

Main advantages

  • You can weld using MIG or MMA
  • Power only 230V
  • Input capacity 8.5KVA
  • Designed for professional use
  • Mobile use

What you will find in the package

The Sharks welding machine package contains a grounding cable, welding cables for both types of welding, a quality shield for welding, a brush and hammer.

Note:

Specifications can be changed without notice. Images are for illustrative purposes only.

Tie rozmery zvaračky su pravdivé 680x300x380.

Dobrý deň. Je pri tejto zváračke príslušenstvo: zvárací kábel s ukostrovacou svorkou, zvárací kábel s horákom MB 15/3m, zvárací kábel s držiakom elektród, zvárací štít, kefa/kladivko, redukčný ventil s predohrevom, 2x objímka, 2x tryska, hubica? Toto máte v popise a bol by som nerád ak ju objednám a nebude to tam.

příslušenství: svařovací kabel s ukostřovací svorkou, svařovací kabel s hořákem MB 15/3m, svařovací kabel s držákem elektrod, svařovací štít, kartáč/kladívko, redukční ventil s předehřevem, 2x objímka, 2x tryska, hubice. A jaka velikost civky dratu se vejde do svarecky?

Dobrý den je součásti baleni i redukčni ventil a náhradni trysky? Na jiných obchodech udávaji že ano

Docela malý přístroj,dokáže to provařit 8mm materiál ? Nějaké zkušenosti máte?

Zdravím, je v dodávke aj redukčný ventil s predohrevom?

Questions and answers: Welding inverter SHARKS 250-Y10 MIG/MMA IGBT
Accessories for Welding inverter SHARKS 250-Y10 MIG/MMA IGBT