Interests with NO competition!.
- Low monthly isntallment
- No pointless overpaying
- Available for purchases from 3.000 Kč till 250.000 Kč
- Get the product of your dreams today, without further delay
3D Printing Accessories instalment Purchases with interest rates from 4,9 % p.a.
Úrok
4,9 %
p. a.
Was this information useful?
This form is used only for evaluating the information in the description above.
If you have any question about our products, services, transport or any other request, please contact our customer support.
If you have any question about our products, services, transport or any other request, please contact our customer support.
What should be improved? Is anything missing here? Is anything wrong? Share it with us.
26
Results
3D Printer Accessory - simultaneous drying and printing, even heating up to 70 °C within 20 minutes, intelligent humidity and temperature control, Support for stacked printing up to 16 colours, safe operation with PTC heating and automatic shutdown, compatible with first generation AMS systems
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
SUNF250801
3D Printer Accessory - Four to 16 colours in one print, wide compatibility, simple setup and operation, crisp and clean colour transitions, durable design for long life and stable performance
In instalments
from
172,-
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CREAU240909
In instalments
from
110,-
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
ELEEG240461
3D Printer Accessory - multicolour module, automatic switching of up to 4 filaments, RFID filament management, detection of running and tangled filament, moisture protection with desiccants, for filaments 1,75mm
In instalments
from
172,-
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
CREAU251105
3D Printer Accessory - for the Bambu Lab P1 and X1 series, increased filament flow, easy to install, temperature control, long service life, standard nozzle diameter, maximum temperature up to 300 °C, PLA compatible materials, ABS, PETG, TPU, etc., easy cleaning and maintenance
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
BITR2402
3D Printer Accessory – resin model cleaner, IPA replacement, non-flammable, odourless, multiple rinses
In stock 4 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
ALPHAPRINT02
3D Printer Accessory – resin model cleaner, IPA replacement, non-flammable, odourless, multiple rinses
In instalments
from
177,-
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
ALPHAPRINT03
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 8kg, print temperature: up to 255°C, print mat temperature: 80°C, recommended print speed: from 30mm/s to 350mm/s
In instalments
from
140,-
In stock 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF617k226
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 8kg, print temperature: up to 255°C, print mat temperature: 80°C, recommended print speed: from 30mm/s to 350mm/s
In instalments
from
147,-
In stock 3 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
DF617k232
Filament - made from ASA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 4,5kg, print temperature: up to 260°C, print mat temperature: 80°C, recommended print speed: from 30mm/s to 350mm/s
Filament - made from PCTG, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 4,5kg, print temperature: up to 270°C, print mat temperature: 80°C, recommended print speed: from 30mm/s to 350mm/s
Filament - made from PCTG, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 4,5kg, print temperature: up to 270°C, print mat temperature: 80°C, recommended print speed: from 30mm/s to 350mm/s
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 8kg, print temperature: up to 215°C, print mat temperature: 45°C, recommended print speed: from 30mm/s to 350mm/s
Filament - made from Nylon pa, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 0,75kg, print temperature: up to 280°C, print mat temperature: 80°C, recommended print speed: from 30mm/s to 150mm/s
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 8kg, print temperature: up to 215°C, print mat temperature: 45°C, recommended print speed: from 30mm/s to 350mm/s
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 8kg, print temperature: up to 215°C, print mat temperature: 45°C, recommended print speed: from 30mm/s to 350mm/s
Filament - made from PCTG, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 4,5kg, print temperature: up to 270°C, print mat temperature: 80°C, recommended print speed: from 30mm/s to 350mm/s
Filament - made from Nylon pa, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 0,75kg, print temperature: up to 280°C, print mat temperature: 80°C, recommended print speed: from 30mm/s to 150mm/s
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 8kg, print temperature: up to 255°C, print mat temperature: 80°C, recommended print speed: from 30mm/s to 350mm/s
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 8kg, print temperature: up to 230°C, print mat temperature: 45°C, recommended print speed: from 30mm/s to 350mm/s
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 8kg, print temperature: up to 230°C, print mat temperature: 45°C, recommended print speed: from 30mm/s to 350mm/s
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 4,5kg, print temperature: up to 230°C, print mat temperature: 45°C, recommended print speed: from 30mm/s to 350mm/s
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 8kg, print temperature: up to 215°C, print mat temperature: 45°C, recommended print speed: from 30mm/s to 350mm/s
Filament - made from PCTG, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 8kg, print temperature: up to 270°C, print mat temperature: 80°C, recommended print speed: from 30mm/s to 350mm/s