INPRODUCTS Impregnation for workwear 200 ml
Don't like the alternatives? Choose from the full product list
- Reviews 3
- Help and manuals
- Ingredient
- Specifications
- Photos & Videos 1
- Alternatives 8
- Accessories and suggested products
INPRODUCTS Impregnation for workwear 200 ml
With INPRODUCTS impregnation, you can protect your workwear from moisture and oil, petrol, salt and other chemicals for up to three months. It is easy to apply spray and guarantees protection thanks to the unique invisible silicon nanoparticle layer technology. Maintains the breathability of the material and lasts up to ten wash cycles. The spray is non-flammable and completely odourless. The impregnation also has increased resistance to grease, oil and industrial substances. A thin film of silicon nanoparticles protects the membrane clothing of Gore-Tex, Climatic, Gelanots and other brands against moisture and contamination. With INPRODUCTS impregnation you can extend the life of your workwear by several years. With impregnation, it will protect the police uniforms and equipment, military and police uniforms, forestry clothing, overalls and gloves, medical and laboratory coats, cooking aprons and clothes.
Key features of INPRODUCT workwear impregnation, 200 ml
- Protects clothes from getting wet and excessively dirty
- The fabric acquires hydrophobic and oleophobic properties
- Does not hinder the breathability or flexibility of the material
- Significantly reduces the need to clean clothes
- Easy application
- Creates a protective silicon layer
- It is very suitable for extreme conditions
- Gentle to all surfaces
- Lasts up to 10 wash cycles with water and up to 5 cycles with detergent
Silicon layer reliably protects against moisture
The solution forms a protective silicon layer on the surface of the fabric, which repels water and chemicals and, among other things. also prevents unsightly stains. A layer of silicon nanoparticles allows the membrane fabric to be cleaned of salt and sweat during washing. After drying, the function of the nanoparticles is restored. The impregnation lasts up to 10 washing cycles with water and up to 5 cycles with washing powder. The impregnation restores the waterproofness of the fabric. The workwear will be protected against moisture, oil compounds and other chemicals - and will "breathe" at the same time.
Shelf life:
Min. 2 years from date of manufacture
Volume:
200ml
Consumption:
25 to 100 ml per 1 m² (depending on the absorption properties of the material)
Use:
Apply the solution in a continuous layer from a distance of 10 to 20 cm. When applying to non-absorbent material, spread the solution over the shoe with a sponge. After application, wait 24 hours - during this time a protective silicon layer will form on the surface. During drying, place the object to be treated in a ventilated area and out of sunlight.
Storage:
Store the solution container at temperatures between 3 and 30 °C and out of direct sunlight.
Specifications
Usage
Features
Specifications can be changed without notice. Images are for illustrative purposes only.
