On this page you will find car Tools JONNESWAY at the lowest prices, more so all car Tools JONNESWAY ranked from the lowest to the highest price. It will be easier to see products that are now marked at their lowest price. The item with the lowest price in this category is JONNESWAY Flywheel lock AI010094 marked at 193 Kč incl. VAT. Is this what you’re looking for?
64
Results
Car Mechanic Tools - professional, with speed control (right-left)
Car Mechanic Tools - max. cutting thickness: steel 1.4 mm, speed without load: 3200 bpm, working pressure: 6,2 bar, air connection: 1/4" GW, power supply: 10 mm, average air consumption: 250 l/min, length: 210 mm, weight: 1kg
Car Mechanic Tools - tester to check the functionality of the seals under the engine head, to diagnose a cracked engine head, a cracked engine block or a damaged head gasket, the instrument allows easy diagnosis and quick damage detection, The principle of operation of the instrument is based on the measurement of the co2 content in the cooling system, the reaction liquid in the tester chamber reacts with the gases contained in the cooling system, and if the co2 concentration is elevated, the liquid changes colour, dual chamber design (with filter between chambers)
Car Mechanic Tools - manual ATF filler for automatic transmissions, differentials i., capacity 4 l, hand plunger, pressure up to 5 bar, transparent hose 150 cm long, the hose includes a valve with quick coupling, pressure gauge 0-5 bar, pack of ATF adapters (8 pcs, of which 3 universal)
Standard Socket Set - alternator disassembly jig set
Car Mechanic Tools - measuring tools, creating pressure and vacuum, with accessories Jonnesway AI040031, double-acting pump, which creates a vacuum of up to -0, 75bar and pressure up to +4bar, use: such as brake bleeding, checking vacuum sensors, Exhaust gas recirculation valve, throttle valve, fuel pressure regulator, pressure modulator in automatic transmissions, brake booster etc., Content: metal pump with pressure gauge in the range -1 to 4bar, flexible cable with a diameter of 6 mm, length 600 mm - 2 pcs, a set of connection terminals and plugs, set of connection clamps with cables, set of cable connectors, container with a two-necked lid - additional lid for the container, CONTROL PROCEDURE: 1. Connect the pump to the part to be inspected using a suitable spike, use the rotary head to adjust the operating range (IN - vacuum, OUT - pressure), create pressure or vacuum by pumping and monitor the pressure gauge, the pump is not used directly for suction of liquidsThe additional container is used for this purpose, which is pa
Puller for bearings - manual, double arm, length 380 mm, span 8 - 32 mm, weight 1 kg
Spray Gun - professional paint gun, container volume: 0.6 liters, connection: M16 × 1.5, working pressure: 3.5 - 5.0 bar, air connection: 1/4" GZ, dia. consume. air: 396 l/min, weight: 0.7kg
Spray Gun - professional paint gun, container volume: 0.6 liters, connection: M16 × 1.5, working pressure: 3.5 - 5.0 bar, air connection: 1/4" GZ, dia. consume. air: 396 l/min, weight: 0.7kg
Car Mechanic Tools - drill - angular, max. diameter of the drill bit: 10 mm, direction of rotation: left/right, idle speed: 1 800 rpm. /min, working pressure: 6,2 bar, air connection: 1/4" GW, power cord: 10 mm, air outlet: rear, average air consumption: 113 l/min, length: 210 mm, weight: 1.82 kg, Noise level: 86.1 dBA
Car Mechanic Tools - 3,2-6,4mm, maximum rivet size: 6.4 mm (for steel rivets), 4.8 mm (for stainless steel rivets), crushing force: 1200 kgf (kG), stroke: 14 mm, working pressure: 6,2 bar, air connection: 1/4" GW, power supply: 10 mm, average air consumption: 1,8 l/cycle, weight: 1,94 kg
Car Mechanic Tools - professional equipment for crimping thin-walled steel, aluminium and copper hoses with diameters of 3/16" (4, 75mm) and 1/4" (6mm), SAE system, the device is designed for connecting hoses externally, internally, EQUIPMENT - Press - Handle - 2-piece punch 3/16" (4, 75 mm) - 2-piece 1/4" (6mm) punch - 3/16" (4, 75mm) outside-inside- Punch 1/4" (6 mm), external-internal- pressure roller punch
Free deliveryAlzaboxes and stores
Car Mechanic Tools - professional, rivet nut size: M4-M10, strength: 1650 kgf (kG), stroke: 8 mm, working pressure: 6,2 bar, air connection: 1/4" GW, supply hose: 10 mm, average air consumption: 1,5 l/cycle, weight: 1,55 kg
Chcete doručiť tovar na Slovensko? Prezrite si
Náradie do auta