Archive - Construction Site Equipment
Choose an alternative in the category
Construction Site Equipment
23,437
Results
Discontinued
Order Code:
AUPR04763
Screwdriver Set of CrV, flat (5x75, 6x100, 8x150mm) and cross (1x75, 2x100, 3x150mm)
Discontinued
Order Code:
AUPR04762
Discontinued
Order Code:
AUPR04800
Discontinued
Order Code:
AUPR04796
Discontinued
Order Code:
AUPR04791
Discontinued
Order Code:
AUPR04790
Discontinued
Order Code:
AUPR04789
Hammer Drill - power consumption 850W, idle speed 0-2800/min, number of strokes 0-44800/min, max 25mm drill for wood, max 13mm drill bit for masonry, max 13mm drill bit for steel, weight 2.4kg
Discontinued
Order Code:
MAD0031
Hammer Drill -power consumption 850W, idle speed 0-2800/min, number of hammers 0-27000/min, drill bit max. 13mm, max. drilling in wood 25mm, max 13mm drilling, max 13mm drilling, weight 2.7kg
Discontinued
Order Code:
MAD0030
Belt Sander - power input, belt, idle speed 120-360m/min, abrasive belt 533 x 75mm, abrasive area 170 x 75mm, weight 3.5kg
Discontinued
Order Code:
MAD0028
Discontinued
Order Code:
MAD0026
Folding Ladder - aluminium, maximum height: 149cm, load capacity: 150kg, weight: 7.1kg
Discontinued
Order Code:
VENZE018
Angle Grinder with power of 900W, disc diameter: 125mm, max speed: 11000 rev/min, additional handle, weight: 1,7 kg
Discontinued
Order Code:
MAD0025
Angle Grinder power input, wheel diameter 115mm, spindle M14, idle speed 11000 / min, handle M8 thread, weight 1.6kg
Discontinued
Order Code:
MAD0024
Angle Grinder power consumption, wheel diameter 230mm, M14 spindle thread, idle speed 6000 / min, handle M14 thread, weight 6.0kg
Discontinued
Order Code:
MAD0023
Discontinued
Order Code:
MAD0019
Discontinued
Order Code:
MAD0018
Cordless Screwdriver - Li-ion, 3.6V, 1300mAh, idle speed 180/min, L/P run, tool carrier 1/4" hexagon, max. Torque 4Nm, battery charging approx 4-5h, weight with battery: 370g
Discontinued
Order Code:
MAD0017
Ladder - aluminium, 14 rungs, 3.95m working height, 3.93m folded length, weight: 6.2kg, maximum load: 150kg
Discontinued
Order Code:
VENZE003
Ladder - aluminium, 12 rungs, 3.18m working height, 3.18m folded length, weight: 5.3kg, maximum load: 150kg
Discontinued
Order Code:
VENZE002
Drill - 680 W, with hammer, speed up to 2800 RPM, maximum torque: 10,8 Nm, motor type: carbon, maximum chuck size: 13mm, weight: 2kg
Discontinued
Order Code:
CIB108g
Router Power Tool power 2300W, idle speed 9-22000 / min, shaft clamping 12mm, depth adjustment 0.1mm, weight 6.1kg
Discontinued
Order Code:
CIB127e
Rotary Hammer - with pneumatic hammering, power input 800 W, chuck SDS Plus, 1200 RPM rated speed, 4600 impact rate per minute, impact energy 2,4 J, weight 2,8 kg
Discontinued
Order Code:
CIB104c
Rotary Hammer - combined power consumption 800W, impact energy 2.4J, idle speed 0-1200/min, number of hits 4600/min, weight 2.8kg, depth stop, suitcase
Discontinued
Order Code:
CIB104b
