Dobrý den, je možné varnou indukční desku BOSCH PIE675DC1E zapojit na 230 V /20A. Děkuji za informaci. Slavík

With the BOSCH PIE675DC1E induction hob cooking will become a breeze. Cooking on induction guarantees speed, low power consumption and easy cleaning of the hob. With DirectSelect Premium control, you can select the cooking zone directly and easily, set the desired power level and other functions. Optimal frying results are achieved with the PerfectFry sensor, which automatically checks the temperature. The PowerBoost feature can reduce the time to boil water by up to 50%. With its elegant design with bevelled front and back bevel and side profiles it will not only be a practical but also aesthetic addition to any modern kitchen.
Induction hobs supply heat only to the bottom of the pot, which means greater safety and more comfort. The induction hob can bring water to the boil twice as fast as ceramic and with the PowerBoost feature, even more power is added to speed up the cooking process. So you save not only energy but also time.
Induction cooking zones:
2 x O 180mm, 1.8kW (max. power 3.1kW)
1 x O 145mm, 1.4kW (max. power 2.1kW)
1 x O 210mm, 2.2kW (max. power 3.7kW)
What is the difference between flexi, combi zone, and round inductors?
Round zones have a fixed size. A combi zone bridges two separate zones into one larger area. A flexi zone, on the other hand, adapts to the shape and size of the cookware anywhere on the surface.
Can I connect the hob to 400V?
Yes, most induction hobs can be connected to 400V (two phases), which is actually recommended for reaching full power.
Why can't I connect a hob with a power input of 4.6 kW to two phases?
A 4.6 kW power input is designed to run on a single, stronger phase. Splitting the load across two phases usually requires a higher total power rating, around 7 kW.
On your website, you state Voltage 220-240 V, can the hob be connected to a multi-phase connection?
Yes, the 220-240V figure refers to the voltage per phase. The hob can typically be connected to two phases (400V) as well.
Which hobs are designed for flush installation?
These are frameless models with polished edges, listed in the range as suitable for flush-mount installation.
The hob is noisy, it clicks loudly.
The clicking comes from switching relays or the power management function. It's a normal operating characteristic of induction technology, not a fault.
Is it possible to turn off the sound signals on the hob?
Yes, on Bosch and Siemens models this can be done in the "Basic Settings" menu (C2). Confirmation tones can be muted, but warning signals stay active regardless.
What is the smallest diameter of cookware that will work on an induction hob?
The minimum diameter depends on the size of the zone, and typically falls somewhere between 9 and 12 cm.
For questions about Bosch large home appliances, you can find all the useful information here.
BSH domácí spotřebiče s.r.o., Radlická 350/107c, 158 00, Praha 8, www.bsh-group.com/cz
Specifications can be changed without notice. Images are for illustrative purposes only.