DFI NFII U400S-AL - nForce2 Ultra 400/MCP-RAID DualCh DDR400, AGP 8x, SATA RAID LAN 5.1 audio scA

Motherboard
Code:  AD020
DFI NFII U400S-AL - nForce2 Ultra 400/MCP-RAID DualCh DDR400, AGP 8x, SATA RAID LAN 5.1 audio scA Discontinued

DFI NFII U400S-AL - nForce2 Ultra 400/MCP-RAID DualCh DDR400, AGP 8x, SATA RAID LAN 5.1 audio scA

Motherboard with a powerful and stable čipsetem nForce2 processors for AMD Athlon, Duron and Sempron with the frequency of bus system to 400 MHz.It dualchannel memory controller and can be fitted to 3 GB of RAM type DDR266, DDR333, DDR400.For up to six hard drives are two channels ATA-133 ports and two Serial-ATA150 RAID functions with 0.1, 0 +1 and JBOD.It is equipped with an integrated network card with a speed 10/100 Mbit / s šestikanálovou sound card.For further extension is available a slot AGP 8x, and five PCI slots.External devices can connect to up to eight USB ports and serial and parallel port.

The parameters and specifications:

Applicable processors:
Socket A AMD Athlon, Athlon XP, Duron, Sempron
FSB 200, 266, 333, 400 MHz

Čipset:
NVIDIA nForce2 Ultra 400/MCP-Raid

RAM:
Dual controller
3 slot for the max3 GB DDR266, DDR333, DDR400

Extension slots:
1 x AGP 8x
5 x PCI

IDE ports:
2 x ATA-133 (max4 devices)
2 x Serial ATA150-(max2 facilities)
RAID 0, 1, 0 +1 and JBOD

Sound card:
6-channel AC'97 codec

Network card:
LAN Phy 10 / 100 Mbps

Ports on the rear panel:
1 x AUX, CD-in
1 x COM
1 x Line-in / out
1 x LPT
1 x microphone
2 x PS / 2
1 x RJ-45
1 x S / PDIF input / output
4 x USB 2nd0

Extension connectors:
1 x IrDA
1 x S / PDIF output
4 x USB 2nd0

The size of plates:
Format ATX
305 x 240 mm
Note:

Specifications can be changed without notice. Images are for illustrative purposes only.

There are no posts in this discussion.
Accessories for DFI NFII U400S-AL - nForce2 Ultra 400/MCP-RAID DualCh DDR400, AGP 8x, SATA RAID LAN 5.1 audio scA