ThermaltakeTMG A2 (CL-P0373)

Top radiator designed for AMD processors with a cap socket 754, 939 and AM2.Cooling a strong current of air ensures regulovatelný fan with the performance of 300 to 2500 revolutions per minute and an excellent flow of air to 35.14 CFM.Fan can connect to the motherboard via 4-pin PWM 12 in the connector, which provides basic deskám with the support of PWM functions to regulate the fan speed.High life of up to 50000 hours guarantees a long-term reliability and because of the special deposit, which has oil reservoirs, which is better achieved by old and lower friction.The unique anti-vibration function prevents resonance, reduces the noise and pressure to re-processor.

Heatpipe technology is based on the principle of closed-tube, which in its "ohřívaném" the end is fluid with a low boiling point, which begins heating evaporate in gaseous form rising to the "chilled" the end where kondenzuje and after the walls of the tube is returned in liquid form back .When heating the liquid waste heat from the chip used to change the form and then in the form of hot steam goes to the other end, it is necessary to cool the temperature in the steam zkondenzuje.Unlike traditional convention, therefore, offers higher efficiency heatpipe technology transfer heat, but only provided a sufficient temperature difference between the two ends of the tube and its correct orientation.

The parameters and specifications:

Supported processors:
AMD Athlon 64 X2 (Socket 939, AM2)
AMD Athlon 64 FX (Socket 939, AM2)
AMD Athlon 64 (Socket 754, 939, AM2)
AMD Sempron (Socket 754, AM2)

Speed:
300 - 2500 rev./ min.

Airflow:
35.14 CFM

Noise:
16 dBA

Durability:
50000 hours

Number HeatPipe:
4 tubes (average 6 mm)

Power:
In 12
4-pin connector PWM

Dimensions:
Fan:92 x 92 x 32 mm
Total:115 x 102 x 103 mm

Weight:
385 g