Processor Cooler Zerotherm Core92
Don't like the alternatives? Choose from the full product list
Processor Cooler Zerotherm Core92
The perfect combination of power and aesthetics together gives us this excellent cooler called Core92 ZEROTHERM from the company.Its special design is not just a decoration, but provides you with a high cooling performance.Condenser consists of passive and active components.The active part consists of 92 graph ventilátorventilátor with blue LED backlight and a passive part consists of ribs arranged above each other.This shape is very suitable because the warm air accumulate in one place but spread evenly throughout the areas of cooling plates made of aluminum.Power is provided 3-pin connector with PWM podporom, allowing fan speed control.The cooler can uchladit heat loss to 130W.
Heat pipe technology is based on the closed tube, where the "heated" the end is a liquid with low boiling point, which is beginning to evaporate by heating in the gas phase increases the "cooling" end where it condenses on the walls and the tube is returned in a liquid state back .When heating the liquid, the waste heat from the chip is used to change state and then in the form of hot steam goes to the opposite end, which must be cooled to a temperature at which vapor condenses.Compared to classical convention has heatpipe technology is greater efficiency of heat transfer, but only if sufficient temperature difference between the two ends of the tube and its correct orientation.
Parameters and specifications:
Supported sockets:
Intel Core i7 Extreme (Socket LGA1366)
Intel Core i7 (Socket LGA1366)
Intel Core i5 (Socket H 1156)
Intel Core 2 Extreme (Socket LGA775)
Intel Core 2 Quad (Socket LGA775)
Intel Core 2 Duo (Socket LGA775)
Intel Pentium D (Socket LGA775)
Intel Pentium 4 (Socket LGA 775)
Intel Celeron D (Socket LGA775)
Intel Celeron (Socket LGA775)
Material:
Core:Aluminum
Rib:Aluminum
Heatpipe:pure copper
Heatpipe:
Number of tubes:6 x 6 mm copper tube
Material:Copper
Fan:
Dimensions:92 x 92 mm
Noise:less than 19 db
Fan Speed:1000 - 2500 RPM
Connector:
3-pin (PWM)
Dimensions:
103 x 93 x 123 mm
Weight:
This product is not an independently functional unit and may require professional installation.
Specifications can be changed without notice. Images are for illustrative purposes only.
Related categories
