MG TDS-M2 digital water quality tester, white

5 1 rating
Aquarium Water Treatment
New arrival 399,-
Warranty 24 months Code:  MGPpec04
MG TDS-M2 digital water quality tester, white 399,- In stock 2 pcs at the supplier's
Buy

MG TDS-M2 digital water quality tester, white

The MG TDS-M2 digital tester lets you quickly check the basic parameters of water quality with a single compact device. It measures the total dissolved solids (TDS) in the range of 0–9999ppm, electrical conductivity (EC) in the range of 0–9999µS/cm, and the liquid temperature from 0.1 to 80°C, or 32–176°F. The measured values are displayed on a clear LCD screen, and supported units include ppm, µS/cm, °C, and °F. With dimensions of just 157×32×14mm, you can comfortably carry and store the tester or keep it on hand with your other measuring equipment. It is powered by a single CR2032 battery, which is included in the package. The included protective case protects the device during storage and transport, making the tester practical for regular home use and measurements on the go.

MG TDS-M2 digital water quality pH tester, white

Key features of the MG TDS-M2 digital water quality pH tester, white

  • Digital tester for measuring water quality
  • Measures TDS from 0–9999ppm and EC from 0–9999µS/cm
  • Measures temperature from 0.1–80°C / 32–176°F
  • Measurement accuracy of +/- 2% and automatic temperature compensation (ATC)
  • Clear LCD display and HOLD function to retain the measured value
  • Suitable for drinking, tap, well, filtered and osmotic water, aquariums, pools, SPAs or hydroponics
MG TDS-M2 digital water quality pH tester, white

Accurate measurement with automatic ATC compensation

The measurement accuracy is +/- 2%, and the integrated ATC function automatically accounts for the temperature of the tested liquid, which helps maintain the reliability of the results under different measurement conditions. The tester is factory-calibrated with a 342ppm NaCl solution, so it is ready to use straight out of the box. The practical HOLD function lets you keep the measured value on the display even after removing the probe from the water, making it much easier to read the result.

MG TDS-M2 digital water quality pH tester, white

Use at home and for professional water testing

Operation is simple: just turn the tester on, immerse the measuring part in the liquid, and wait a few seconds for the value to stabilise. The device can be used to check drinking, tap, well, filtered, or osmotic water. It is also suitable for aquariums, pools, SPAs, hydroponic systems, laboratories, gardening and plant care—anywhere you need to easily monitor the amount of dissolved solids, conductivity or water temperature.

Use:
Drinking, tap, well, filtered and osmotic water, aquariums, pools, SPAs, hydroponics, laboratories, gardening and plant care

Package contents:
TDS & EC digital water quality tester, CR2032 battery, protective case

Technical specification:
Measured values: TDS, EC, temperature
TDS range: 0–9999ppm
EC range: 0–9999µS/cm
Temperature range: 0.1–80°C / 32–176°F
Accuracy: +/- 2%
Units: ppm, µS/cm, °C, °F
Display: LCD
Factory calibration: 342ppm NaCl solution
Power: 1× CR2032 battery
Dimensions: 157×32×14mm

Specifications

Type
Water treatment
Type
Water testing
Product type
Routine care
Designed for
Freshwater aquarium, Marine aquarium
Purpose of test
PH

Type

Type
Water treatment

Basic features

Type
Water testing
Product type
Routine care
Designed for
Freshwater aquarium, Marine aquarium

Function

Purpose of test
PH

Characteristics

Weight
100 g
More Specifications

SHOPLINK s.r.o., Venevská 27, 99001 Veľký Krtíš, [email protected]

Note:

Specifications can be changed without notice. Images are for illustrative purposes only.

There are no posts in this discussion.
Accessories for MG TDS-M2 digital water quality tester, white