Archive - rPLA Filaments
Choose an alternative in the category
rPLA Filaments
12
Results
Filament - made from rPLA, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
Discontinued
Order Code:
EKOMB13
Filament - made from rPLA, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
Discontinued
Order Code:
EKOMB12
Filament - made from rPLA, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
Discontinued
Order Code:
EKOMB11
Filament - made from rPLA, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
Discontinued
Order Code:
EKOMB10
Filament - made from rPLA, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
Discontinued
Order Code:
EKOMB08
Filament - made from rPLA, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
Discontinued
Order Code:
EKOMB09
Filament - made from rPLA, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
Discontinued
Order Code:
EKOMB06
Filament - made from rPLA, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
Discontinued
Order Code:
EKOMB04
Filament - made from rPLA, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
Discontinued
Order Code:
EKOMB05
Filament - made from rPLA, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
Discontinued
Order Code:
EKOMB03
Filament - made from rPLA, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
Discontinued
Order Code:
EKOMB02
Filament - made from rPLA, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 60mm/s
Discontinued
Order Code:
EKOMB01
3d PrinterCreality ENDER 3 (V2): proč je to nejlepší 3D tiskárna pro úplné začátečníky?
Obě generace 3D tiskárny Creality ENDER 3 jsou to nejlepší, co si může začínající tiskař pořídit. Nízkou cenou to začíná, ale rozhodně nekončí. Zcela zásadní jsou i další vlastnosti a parametry, kterými nepohrdnou ani pokročilejší uživatelé. Proč jsou tyto tiskárny tak...
3D tiskárny mají své místo v každé domácnosti! Už nemusíte být IT guru, designový mág, studovaný výtvarník a přes to, můžete realizovat každý svůj tvořivý sen! Je tady nová dimenze tvorby! Nastává doba kutilská, výtvarná a modelářská!