XILENCE fan 80 × 80 × 25 mm, DMI, PWM, Performance C series

5 1 rating
PC Fan - size: 80 × 25mm, 1800 RPM, maximum noise level of up to 20 dB, 4pin PWM, PWM
  162,-
Warranty 24 months Code:  XILchl019
XILENCE fan 80 × 80 × 25 mm, DMI, PWM, Performance C series 162,- In stock > 5 pcs at the supplier's
Buy

XILENCE fan 80 × 80 × 25 mm, DMI, PWM, Performance C series

The XILENCE Performance C PC fan with PWM actively removes warm air from the computer case, helping to cool its components. Its design aims for a balance between cooling performance, low noise, and affordability. It connects to the motherboard using a 4-pin connector, which uses a PWM signal to automatically adjust the rotation speed based on the current system load. The fan operates within a voltage range of 6V to 13.8V, which ensures a reliable start-up and stable operation. Fluid dynamic bearings reduce friction and component wear, contributing to its quiet operation.

XILENCE PC fan 80×80×25mm, DMI, PWM, Performance C series

Key features of the XILENCE Performance C 80×80×25mm PC fan with PWM

  • Fluid dynamic bearing reduces operating noise
  • Rotational speed ranges from 800 to 1800rpm
  • Maximum noise level of 20dB
  • Airflow of 37.04m³/h
  • Connects using a 4-pin PWM connector
  • Rotor blades support efficient airflow
XILENCE PC fan 80×80×25mm, DMI, PWM, Performance C series

Quiet operation with fluid dynamic bearings

Inside the fan, Fluid Dynamic Bearings (FDB) keep operational noise and vibrations to a minimum. This type of bearing uses a thin layer of oil to create pressure between moving parts, which prevents direct contact between metal surfaces and reduces their wear. The FDB technology also helps to stabilise the rotor and extends the fan's lifespan. The result is consistent and quiet operation, with a noise level not exceeding 20dB even at higher speeds.

XILENCE PC fan 80×80×25mm, DMI, PWM, Performance C series

Optimised airflow

The design of the rotor blades promotes efficient air movement. The special shaping and angle of the blades direct the airflow with low resistance and suppress the creation of turbulence, which increases noise levels. As a result, the fan provides an airflow of up to 37.04m³/h, supporting cooling efficiency even in smaller computer builds or in spaces with limited flow. This performance is sufficient for dissipating heat from fanless coolers or for enhancing the overall airflow in the case.

XILENCE PC fan 80×80×25mm, DMI, PWM, Performance C series

Fan connection

Connecting via the 4-pin PWM connector entrusts fan speed control to the motherboard. The speed changes smoothly across a wide range, from 800 to 1800rpm, according to the current temperature of the processor or other monitored components. The system thus maintains optimal operating temperatures without unnecessary noise when full cooling power is not needed. During low load, the fan slows down to an inaudible level. The 440mm long cable provides enough flexibility for routing and connection even in larger cases.

Bearing type:
Fluid Dynamic Bearing (FDB)

Speed range:
800–1800RPM

Airflow:
37.04m³/h

Maximum noise level:
20dB

Power connector:
4-pin PWM

Weight:
65g

Dimensions:
80×80×25mm

Cable length:
440mm

Specifications

Compare
Maximum speed
1,800 RPM
Maximum loudness
20 dB
Airflow
21.8 CFM (37.04 m3/h)
Speeds control
Without speed control

Fan speed

Maximum speed
1,800 RPM
Maximum loudness
20 dB
Airflow
21.8 CFM (37.04 m3/h)
Speeds control
Without speed control

Dimensions

Fan size
80 × 80 mm
Depth
25 mm

Pack

Number of fans per pack
1 pc(s)

Connectors

Power connector
4pin PWM

Weight

Weight
65 g
More Specifications
Note:

This product is not an independently functional unit and may require professional installation.

Specifications can be changed without notice. Images are for illustrative purposes only.

There are no posts in this discussion.
Accessories for XILENCE fan 80 × 80 × 25 mm, DMI, PWM, Performance C series