Jaké jsou rozměry ohřívače

The ELÍZ EHT 4.5 flow heater is one of the pressure-operated heaters with hydraulic switching. It is designed for one point of use only. You will appreciate its versatility. It can be installed above or below the sink or kitchen sink. It is adapted for 360° installation. Its outlets can be rotated both horizontally and vertically. Although it is a pressure heater, it is not important whether you mount it on a pressure or non-pressure tap. The heater is supplied with an economical perlator insert with a flow rate of 2 litres per minute. The power cable reaches a length of 0.8 metres.

The ELÍZ EHT 4.5 instantaneous heater can be connected above or below the sink or kitchen sink to a conventional tap. When connected above the sink, you can fit it directly onto any sink mixer with 30 mm spacing. The ELÍZ EHT 4.5 is not suitable for connection to a shower. It is suitable for wall mounting. Its weight is 1.5 kg. You can rely on the safety of operation thanks to the thermal overheating protection with reset function and the IP25 protection rating. The heater can withstand pressures up to 1.0 MPa.

If you install the ELÍZ EHT 4.5 flow heater directly at the point of use, the pipelines will be very short and you will completely eliminate heat loss. The water is heated only when the water is flowing through the heater, so the power is only drawn during the water start-up. The ELÍZ EHT 4.5 instantaneous heater is equipped with an indicator light that lets you know whether the heater is in operation.
Power:
4.5 kW
Water outlets:
G3/8"M
ELÍZ – ohrievače vody s.r.o., Technická 7, 821 04 Bratislava, +420 725 881 505, [email protected]
Specifications can be changed without notice. Images are for illustrative purposes only.