Dobrý den, rád bych se zeptal, jak je to s ATX verzí u tohoto zdroje. Je pouze ATX 3.1 kompatibilní, nebo splňuje normu ATX 3.1?
ADATA XPG CORE REACTOR II 1000W
PC Power Supply - 1000 W, ATX form factor, 80 PLUS Gold certification, 90 % efficiency, detachable cables, thermal speed control, power switch and zero RPM mode, 135 mm fan size, 2× EPS/CPU 4+4pin, 1× PCI Express 16-pin, 8× PCI Express 8-pin / 6+2-pin, 9× Serial ATA 15-pin, 3× Molex HDD 4-pin connectors, dimensions 150 × 86 × 160 mm (W×H×D)
Show full description
2,999,-
Price Guarantee
Installment calculator
from
757,-
monthly
Shop faster with pickup at AlzaBox or in-store.
Warranty 120 months
Code:
DUzcr2a8
Producer's Website:
ADATA XPG CORE REACTOR II 1000W
2,999,-
In stock > 5 pcs
Buy
ADATA XPG CORE REACTOR II 1000W
The ADATA XPG CORE REACTOR II 1000W PC power supply provides stable power for gaming rigs, workstations, and AI developer systems that require high and consistent performance. With a total output of 1000W and the ATX 3.1 standard, it's ready for power-hungry components. The fully modular cabling makes organising the case's interior easier and contributes to better airflow. Thanks to its 80 PLUS Gold certification, the power supply demonstrates high energy conversion efficiency and reduces waste heat production. Its internal architecture consists of Japanese capacitors, which support reliable and long-term operation.
1000W
Power
ATX
Form factor
80 PLUS Gold
Certification
Fully
Modularity
Key technologies of the ADATA XPG CORE REACTOR II 1000W PC power supply
- ATX 3.1 standard supports the current generation of graphics cards
- 80 PLUS Gold certification confirms high energy conversion efficiency
- Fully modular cabling system simplifies installation and cable management
- 12VHPWR connector supplies power to current graphics cards
- Fan with Zero RPM mode maintains quiet operation under low load
- Japanese capacitors with 105°C temperature resistance contribute to long-term stability
- Withstands power spikes of up to 235% of the rated power
Choosing a power supply
When choosing a suitable PC power supply, the key parameter besides the form factor is its power output. This indicates the maximum number of Watts the power supply can continuously supply to the components in the computer. It is advisable to use a web calculator to calculate the optimal power output based on your chosen components.
Ready for the current generation of hardware
The implementation of the ATX 3.1 standard and a 12VHPWR connector prepare this power supply to power energy-intensive graphics cards and processors. The design accounts for high energy demands and handles short-term power spikes of up to 235% of its rated value. This capability prevents system instability during computationally intensive tasks like gaming or rendering.
Efficiency and stability of the ADATA XPG CORE REACTOR II
The 80 PLUS Gold certification confirms an efficiency of up to 91.4% at 50% load, actively reducing electricity consumption and waste heat production in your build. Voltage stability and low current ripple are supported by the exclusive use of Japanese capacitors. These components, with resistance up to 105°C, are key to long-term reliability and a consistent energy supply to all connected components.
Intelligent and quiet cooling
Heat is dissipated by a 135mm fan, whose speed is controlled by an intelligent curve. At low and medium loads, the system activates Zero RPM mode, where the fan remains off under low load for quiet operation. The fan only starts up after a defined temperature or load threshold is exceeded, thereby maintaining an optimal balance between cooling and noise.
Comprehensive protection for the ADATA XPG CORE REACTOR II PC power supply
The power supply integrates eight types of industrial-grade protection that guard the connected hardware against damage from electrical anomalies. These protective mechanisms include protection against overvoltage, undervoltage, overcurrent, and short circuits. This set of eight protections shields the build's components from unpredictable events on the electrical grid.
Connectors
- 1× ATX 24-pin
- 2× CPU 4+4-pin
- 8× PCI-E 6+2-pin
- 1× 12VHPWR 16-pin
- 9× SATA 15-pin
- 3× Molex 4-pin
Package contents
- XPG FUSION 1600 TITANIUM PC power supply
- Mains power cable
- Set of mounting screws
- User manual
- 1× ATX 24-pin
- 2× ATX 12V 4+4-pin
- 1× 12V-2x6 16-pin
- 2× 12V-2x6 16-pin to 2× PCI-E 6+2-pin
- 6× PCI-E 6+2 to 2× 6+2-pin
- 9× SATA 15-pin
- 3× Molex 4-pin
80 Plus certification in the European market
The 80 Plus certification was created to objectively evaluate the efficiency of computer power supplies. This provides users with a simple and clear comparison between different models. On the European market (where a 230V voltage is used), there are six levels of 80 Plus certification with set requirements for computer power supplies. Higher energy efficiency primarily means lower energy consumption.
| PC PSU load | Efficiency at 20% load | Efficiency at 50% load | Efficiency at 100% load |
|---|---|---|---|
| 80 PLUS | 82% | 85% | 82% |
| 80 PLUS Bronze | 85% | 88% | 85% |
| 80 PLUS Silver | 87% | 90% | 87% |
| 80 PLUS Gold | 90% | 92% | 89% |
| 80 PLUS Platinum | 92% | 94% | 90% |
| 80 PLUS Titanium | 94% | 96% | 94% |
Specifications
1,000 W
ATX
ATX version
Modularity
Detachable cables, Power switch, Thermal speed control, Zero RPM mode
Performance and format
Equipment
Detachable cables, Power switch, Thermal speed control, Zero RPM mode
Type of protection
Efficiency
80 PLUS Gold
90 %
Connectors
12VHPWR 16-pin, ATX 24pin, CPU 8pin / 4+4pin, Molex 4pin, PCI-E 8pin / 6+2pin, SATA 15pin
Number of EPS/CPU 4+4pin
Number of PCI Express 16-pin
PCI Express 8pin / 6+2pin
Number of serial ATA 15-pin
Number of molex HDD 4-pin
Cooling system
135 mm
More Specifications
Landsberger Strasse 302, 80687 Munich, Germany, +49-899-0405-296, [email protected]
Note:
Specifications can be changed without notice. Images are for illustrative purposes only.
