Anycubic Wash Cure 3 max

Anycubic Wash Cure 3 max
The Anycubic Wash & Cure 3 Max is a powerful post-processing station for prints from resin 3D printers, combining washing and UV curing in a single device. Thanks to its large workspace, it handles models up to 305 × 165 × 300mm and is also suitable for larger LCD 3D printers with a print volume of up to 13.6". The automatic mode combines rinsing, immersing the bottom of the model, and subsequent curing, so you can start the entire process with a single button. For curing, it uses 20 UV LEDs with a 405nm wavelength, a rotating platform, and an additional flexible light for even UV exposure.
Key features of the Anycubic Wash Cure 3 max 3D printer accessory
- Washing and UV curing station for resin 3D prints
- Automatic mode for washing and subsequent curing in a single run
- Maximum cleaning model size 305 × 165 × 300mm
- Washing basket capacity of approximately 15.1L
- 20L washing container
- Cleaning combines alcohol immersion and spray rinsing
- More economical use of IPA compared to standard full immersion
- 20× 405nm UV LEDs and a flexible supplementary light
- 360° rotating curing platform
- Maximum UV power density of up to 25000μW/cm² at a distance of 18cm
- Independently adjustable washing and curing times
- Touch buttons for simple operation
- Compatible with most LCD resin 3D printers with a print volume of up to 13.6"
- Power consumption 120W
- Dimensions 434 × 434 × 556mm
- Weight 13.5kg
Specifications can be changed without notice. Images are for illustrative purposes only.

