ANCEL S100 smoke leak detector

ANCEL S100 smoke leak detector
ANCEL S100 smoke leak detector turns tedious leak hunting into a quick and clear job. It feeds fine smoke into the tested system, making it easy to pinpoint the location of the leak. The device handles a wide range of systems from intake and exhaust to the sensitive EVAP system, which is protected thanks to its low output pressure of 0.5PSI. It is ideal for workshops, garages and well-equipped home garages.
Key features of the ANCEL S100 detector
- Designed for diagnosing EVAP, intake, turbo and exhaust systems
- Low 0.5PSI output pressure protects delicate vehicle components
- Continuously adjustable smoke output for precise dosing
- Overheat protection with automatic shut-off at 75°C
- Powered directly from a 12V car battery via a 2.5m cable
- Dimensions of 15.5×11.5×23.5cm (W×D×H) and weight of 1.4kg
- Package includes detector, adapters and a 2.5m smoke hose
Precise leak detection across vehicle systems
The detector works on a simple principle: it feeds visible smoke into a sealed system, which then escapes exactly at the point of the leak. This reliably reveals issues that are otherwise hard to find, such as cracked hoses, worn seals or faulty connections. Its wide diagnostic range covers vacuum systems, low-pressure turbo, intake, cooling, EGR and exhaust systems. The smoke flow rate is less than 10L/min.
Safe operation and protection of sensitive components
Many smoke machines work with higher pressure that can damage sensitive components like the EVAP system. ANCEL S100 features a low 0.5PSI output pressure, so you can use it with confidence even where care is required. The heating element is also separated from other components, protecting internal parts. The device also automatically shuts off if the temperature exceeds 75°C, which increases safety during work.
What you need to operate the detector
The device runs on 12V DC power, for example directly from a car battery. To generate smoke, you need to use mineral oil or baby oil, which is not included in the package. Crucially, the detector requires an external source of compressed air, typically a workshop compressor. It is therefore best suited for workshops, professional garages or home garages equipped with a compressor.
Sunnysoft s.r.o., Kovanecká 2390/1A, Praha 190 00, Czech Republic, +420 222 998 222, [email protected]
Specifications can be changed without notice. Images are for illustrative purposes only.

