Autolamp CZ H7 error message canceller resistor
Autolamp CZ H7 error message canceller resistor
The Autolamp CZ resistor eliminator is used to remove error messages that appear after installing H7 base LED bulbs. The resistor is designed for vehicles with a 12V onboard voltage and resolves issues with the electronic blown bulb check. Thanks to this, the onboard computer does not register the lower power consumption of LED technology as a fault. The result is the correct functioning of the lights without warnings on the dashboard. It simply connects between the supply wires and the LED bulb itself.
Key features of the Autolamp CZ H7 resistor error message eliminator
- Designed for LED bulbs with an H7 base
- Eliminates error messages from the electronic bulb check
- Designed for onboard systems with 12V voltage
- Electrical resistance of 6Ω
- Power consumption of 31W at 13.8V
- Current consumption of 2.25A at 13.8V
- Connection between the supply wires and the bulb
- Mounting on a metal surface is recommended for heat dissipation
Installation and operating properties
The resistor is connected between the supply wires and the base of the LED bulb. During operation, the eliminator heats up significantly, which is a normal characteristic of power resistors. For this reason, it requires mounting on a metal surface of the car body, which will act as a heat sink and dissipate the excess heat. Avoid installation on plastic parts, near wiring, or other materials sensitive to high temperatures to prevent damage.
Autolamp CZ s.r.o. Kratonohy 91, 50324 Kratonohy [email protected] +420 495 585 855, www.autolamp.cz
Specifications can be changed without notice. Images are for illustrative purposes only.
