Best sellers, best pneumatic Tools
We also think that you deserve the best. That’s why on this page, we ranked pneumatic Tools from the most sold to the least sold. You have 41 products to choose from. Customers have the most interest in Scheppach Pneumatic stapler/ clutch, 16-40mm, which you can buy for 1,269 Kč incl. VAT. If you’re intrested in pneumatic Tools in terms of the highest reviews, then look at the pneumatic Tools reviews and tests category.
41
Results
Car Mechanic Tools - Extremely high power of the pneumatic chisel for unscrewing corroded or seized joints, the impact required to loosen wheel bearings, bushings, tapered joints (e.g. pins), corroded and seized bolts, good for lubricant distribution and tensioner bearing removal, rust and paint removal, fastening of the chisels by means of a quick coupling, 1/4" connection, 19 needles, 4500 beats/min, 350 mm, stroke length 43 mm, 1.97 kg, working pressure 6,3 bar
Car Mechanic Tools - for bodywork and locksmithing, powered by a stream of compressed air, descaling, fluxes, rzi, coating of steel elements in body and paint shops, car workshops, manufacturing plants and DIY activities, cartridge with 19 needles, pressure 0,63 MPa, capacity 113 l/min, stroke rate 4 500 strokes/min, fast workflow, the regulation of the number of strokes per minute allows the machining of irregular surfaces, standard connection
Power Sander - pneumatic, rectangular sanding pad, clamp sync paper fastening, sanding surface dimensions 407 × 63.5 mm (L×W), additional handle, weight 3.1 kg, dimensions 17 × 6.35 × 40.7 cm (H×W×D)
Car Mechanic Tools - Set of 22 adapters and pneumatic press for removing VW brake pistons, Damage, BMW, Ford, Honda, Jaguar, Mercedes-Benz i, Supported cars: Opel, Citroen XM, Xantia u. a., Alfa Romeo, Audi, Austin, BMW, Ford, Honda, Jaguar, Mercedes-Benz, Mitsubishi, Nissan, Rover, toyota, VW, Mazda, Saab 9000, Subaru, Nissan Primera, VW -Golf IV, Audi 80.90, V8 + 100, Ford Sierra ABS + Scorpio ab 85, Honda Prelude, Nissan Silvia 1.8 turbo, Rover 8000, Subaru L+Z, VW-Golf + Passat, GM Motors, Saab, Renault, Maxima, opel, Citroen C5
Car Mechanic Tools - set of pneumatic tools for mounting disc brakes, air inlet 1/4" quick coupling, 16 parts in set
Random Orbital Sander - pneumatic, up to 12000 RPM, disc diameter 150 mm, speed control, built-in suction, dimensions 11 × 15 × 23 cm (H×W×D), weight 0.84 kg, service key included
Angle Grinder - disc diameter 75 mm, max. speed 20000 rev/min, speed control, dimensions 10 × 21.2 × 9.3 cm (W×H×D), weight 0.64 kg, service key included
Tacker for wood and textile - pneumatic, low-staple indicator, safety fuse and non-slip grip, staple length 16-40 mm, staple width 5.7 mm, staples included, weight 1.48 kg
1,439,-
In stock 4 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
BOF297
Impact Wrench pneumatic, mounting type: impact joint 1/2", 7500 rev/min, working pressure of the tool is 6,3 bar, 340 Nm torque
1,689,-
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
BOF230
Impact Wrench pneumatic, 160 rev/min, working pressure of the tool is 6,3 bar, 68 Nm torque
1,389,-
In stock 4 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
BOF229
Impact Wrench pneumatic, mounting type: impact joint 1/2", 8800 rev/min, working pressure of the tool is 6,3 bar, 678 Nm torque
Belt Sander - manual, pneumatic, maximum RPM 20000 rev/min, without suction, sanding belt dimensions: 20 × 520 mm (W×L), maximum operating pressure 6.3 bar, angle adjustment option, weight 2 kg
1,248,-
In stock 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
pne000015
Belt Sander - manual, pneumatic, maximum RPM 20000 rev/min, without suction, sanding belt dimensions: 10 × 330 mm (W×L), maximum operating pressure 6.3 bar, angle adjustment option, weight 1 kg
795,-
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
pne000014
Straight Grinder - pneumatic, maximum speed 20000 rev/min, maximum operating pressure 6.3 bar, air consumption 160 l/min, weight 0.82 kg
Buy with code
ALZADNY15
The discount code gives the option of applying a discount on a given product when entering the code in the shopping cart.
Získejte slevu 15 % s kódem ALZADNY15. Klikněte a kód se uplatní automaticky.
1,242,-
1,461,-
In stock 2 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
pne000012
Impact Wrench pneumatic, mounting type: impact joint 1/2", 10000 rev/min, 1356 Nm torque
3,955,-
In stock 3 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Order Code:
pne000007
Impact Wrench pneumatic, mounting type: impact joint 1", 4000 rev/min, working pressure of the tool is 8 bar, 2450 Nm torque
Chcete doručiť tovar na Slovensko? Prezrite si
Pneumatické náradie
Magyarországra rendelnél? Látogasd meg ezt a termékkategóriát
Pneumatikus szerszámok