EUROL Engine Oil Treat 250 ml
- Help and manuals
- Ingredient
- Specifications
- Photos & Videos 1
- Alternatives 8
- Accessories and suggested products
EUROL Engine Oil Treat 250 ml
EUROL Engine Oil Treat is an additive developed to create a stronger and tougher lubricating film between moving engine parts. The product reduces metal-to-metal contact in the engine by using carefully selected synthetic base oils and advanced additives. It increases the oxidation stability of the engine oil, preventing it from oxidising at extremely high temperatures and allowing it to perform for longer. EUROL Engine Oil Treat provides extra cleaning properties to the oil, significantly reducing friction and increasing performance, which leads to fuel savings. The additive is compatible with all commercially available oils for petrol and diesel engines.
Key features of EUROL Engine Oil Treat additive, 250ml
- Creates a stronger oil film
- Reduces friction between metal parts
- Increases oxidation stability
- Enables oil to perform at higher temperatures
- Reduces fuel consumption
- Uses engine oil as a carrier fluid to reach the relevant engine parts
Application:
Read the instructions on the packaging before use. We recommend using a 250ml can of EUROL Engine Oil Treat for 4L to 6L of engine oil. Add the additive to warm engine oil. Ensure you do not exceed the maximum oil level by checking the dipstick. After adding the additive, let the engine idle for 10 minutes to mix the oil thoroughly.
Density at 20 °C:
0.87kg/L
Pour point:
-27 °C
Flash point:
168 °C
Viscosity index:
142
Kinematic viscosity at 40 °C / 100 °C:
129.6 cSt/16.9 cSt
Specifications
Usage
Season
Features
Volume
Dosage
Eurol BV, Energiestraat 12, 7442 DA Nijverdal, The Netherlands, +31548615165
Specifications can be changed without notice. Images are for illustrative purposes only.
