Dobrý den, můžu použít na podvozek auta?

Give your garden tools, screws, nuts, skates or outdoor fence a new lease of life simply with the HG Cutter. The concentrated product will playfully remove rust without sanding. It evaporates very slowly and thus acts on the treated area for a longer time. Thanks to the strong anticorrosive action of the product, the metal can be painted or varnished immediately after treatment. Smaller items can simply be dipped into the product.

Use:
Remove loose rust first. Dilute the HG cutter with water in a 1:5 ratio. Depending on the amount and thickness of the rust, leave the product on for 10 minutes to several hours. Rinse the treated surface thoroughly with water. Small objects can simply be immersed in the product. If you cannot immerse the rusted object in the product, apply HG Rust Remover to it with a brush. Again, it depends on the amount of rust and rinse the item with more water in the final rinse. Repeat the application as necessary.
Note:
If the product is applied to painted or varnished surfaces or any other surface treatment, the protective layer will need to be reapplied. Protect your hands with rubber gloves when working. Use caution when in contact with calcareous surfaces.
Safety Alert:
Causes severe skin and eye damage. Keep out of reach of children. Wear protective gloves and safety glasses.
HG International, B.V.; P.J. Oudweg 41, 1314 CJ Almere, Nizozemsko; [email protected], 036549480
Specifications can be changed without notice. Images are for illustrative purposes only.